Xtrasaver Replacement TV Stand Legs

1. Introduzione

This manual provides comprehensive instructions for the installation, use, and maintenance of your Xtrasaver replacement base stand legs. These legs are specifically designed for Vizio 40-inch Smart TV models V405-H19, V405-G9, and D40F-G9. Please read this manual thoroughly before proceeding with installation to ensure proper setup and safe operation.

2. Informazioni sulla sicurezza

• Ensure the television is powered off and unplugged from the electrical outlet before beginning installation.
• Place the television face down on a soft, clean surface (e.g., a blanket or foam) to prevent screen damage during installation.
• Always handle the television and stand components with care to avoid injury or damage.
• Confirm that the installation surface is stable and level to prevent the television from tipping over.
• Tenere le parti di piccole dimensioni, come le viti, fuori dalla portata dei bambini.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 2 x TV Stand Legs (Left and Right)
• 1 x Screw Set (4 screws)

Immagine 3.1: Passoview of Xtrasaver replacement TV stand legs and included screws.

4. Configurazione e installazione

Follow these steps to correctly install the replacement TV stand legs:

1. Preparare la TV: Lay your Vizio TV face down on a soft, flat surface to protect the screen. Ensure the TV is unplugged.
2. Identify the Legs: The stand legs are marked 'REAR LEFT' and 'REAR RIGHT' to indicate their correct placement. Position each leg according to these labels on the back of your TV.

Immagine 4.1: Primo piano view of a stand leg, indicating the 'REAR LEFT' marking for correct orientation.
3. Allinea e proteggi: Align the screw holes on each stand leg with the corresponding holes on the back of your Vizio TV. Insert the provided screws into the holes and tighten them securely with a screwdriver. Do not overtighten.


Image 4.2: The set of four screws included for attaching the stand legs.

4. Verifica stabilità: Once both legs are attached, carefully lift the TV and place it upright on a stable, level surface. Gently test the stability of the TV to ensure the legs are firmly secured and the TV does not wobble.

5. Operativo

Once the stand legs are securely installed, your Vizio TV is ready for use. Ensure the TV is placed on a flat, stable surface that can support its weight. Avoid placing the TV near edges where it could be easily knocked over. The stand provides a fixed tabletop mount for your television.

6. Manutenzione

• Pulizia: To clean the stand legs, use a soft, dry cloth. Avoid abrasive cleaners or solvents that could damage the material.
• Serraggio delle viti: Periodically check the tightness of the screws connecting the legs to the TV. If any screws feel loose, gently tighten them to maintain stability.
• Condizioni ambientali: Avoid exposing the stand to extreme temperatures or direct sunlight for prolonged periods, as this may affect the material's integrity.

7. Risoluzione Dei Problemi

• TV is Unstable:
  • Assicurarsi che tutte le viti siano completamente serrate.
  • Verify that the TV model is compatible with these replacement legs.
  • Confirm the TV is placed on a flat, stable, and level surface.
• Le gambe non si adattano:
  • Double-check your Vizio TV model number against the compatible models listed in this manual (V405-H19, V405-G9, D40F-G9).
  • Ensure the 'REAR LEFT' and 'REAR RIGHT' legs are correctly oriented.

8. Specifiche

9. Garanzia e supporto

For information regarding product warranty, please refer to the documentation provided with your purchase or contact the seller directly. For any support inquiries or assistance with your Xtrasaver replacement TV stand legs, please reach out to Xtrasaver customer service.