BOMAZ Replacement Remote Control Instruction Manual

Introduzione

This manual provides instructions for the BOMAZ Replacement Remote Control, designed to operate various Yamaha AV Receiver models. This remote offers a direct replacement solution, requiring no complex programming or setup. Simply insert batteries, and it is ready for use with your compatible Yamaha AV receiver.

Modelli compatibili: RX-V379, RX-V381, RX-V383, RX-V385, RX-V483, RX-V579, RX-V581, HTR-3068, RX-V585, HTR-2067, RX-V479, RX-V479BL, RX-V481D, RX-V583, HTR4068, HTR4069, HTR5069.

Impostare

1. Installazione della batteria

Il telecomando richiede due (2) batterie AAA (non incluse). Per installarle, seguire questi passaggi:

1. Individuare il coperchio del vano batterie sul retro del telecomando.
2. Per aprire il vano, far scorrere il coperchio verso il basso.
3. Inserire due batterie AAA, assicurandosi che i terminali positivo (+) e negativo (-) siano allineati correttamente con le marcature all'interno del vano.
4. Riposizionare il coperchio del vano batteria finché non scatta in posizione.

Figura 1: Vano batterie con batterie AAA.

2. Utilizzo iniziale

This replacement remote control is pre-programmed and requires no additional setup. Once batteries are installed, it is ready to operate your compatible Yamaha AV receiver.

Istruzioni per l'uso

Familiarize yourself with the layout and functions of the remote control buttons:

Figura 2: Fronte view del telecomando.

• Pulsante di accensione (●): Located at the top right, press to turn the AV receiver On or Off.
• Zone A / Zone B Switch: Located at the top left, this slider allows you to select which audio zone (A or B) the remote will control.
• Scene Buttons (BD/DVD, TV, NET, RADIO): These buttons allow quick selection of predefined scenes or input sources.
• Input Selection Buttons (INPUT ▲/▼, USB, NET, BLUETOOTH): Use these to cycle through available input sources or directly select specific ones.
• Volume Control (VOLUME + / -): Regola il livello del volume principale.
• Tasto muto: Disattiva o attiva l'audio in uscita.
• Navigation Pad (SETUP, OPTION, RETURN, TOP MENU, HOME, POP-UP/MENU, ENTER, Arrow Buttons): Used for navigating menus and confirming selections on your AV receiver's display.
• Colored Buttons (RED, GREEN, YELLOW, BLUE): These buttons provide access to specific functions within certain menus or applications, often indicated on the receiver's display.
• Playback Controls (MEMORY, TUNING, PRESET): Used for media playback, radio tuning, and managing presets.

Utilizzo del telecomando

Point the remote control directly at the infrared sensor on your Yamaha AV receiver. Ensure there are no obstructions between the remote and the receiver.

Manutenzione

Pulizia

To clean the remote control, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.

Sostituzione della batteria

Replace batteries when the remote's responsiveness decreases or it stops functioning. Refer to the "Battery Installation" section for instructions. Always replace both batteries at the same time with new AAA batteries.

Risoluzione dei problemi

• Il telecomando non risponde:
  • Ensure the remote has fresh AAA batteries installed correctly.
  • Check for any obstructions between the remote control and the AV receiver's infrared sensor.
  • Verify that you are pointing the remote directly at the receiver.
• Funzioni specifiche non funzionanti:
  • Confirm that the remote is set to the correct Zone (A or B) if your receiver supports multiple zones.
  • Ensure the AV receiver is powered on and functioning correctly.
  • Some functions may be specific to certain input modes or receiver settings.

Specifiche

Garanzia e supporto

For any issues or questions regarding your BOMAZ Replacement Remote Control, please refer to the retailer's return and support policies. Specific warranty details may vary by purchase location.

Si prega di conservare la prova d'acquisto per eventuali reclami in garanzia.