Introduzione
This manual provides essential information for the assembly, proper use, maintenance, and troubleshooting of your new tectake 800866 Padded Velvet Effect Chairs. Please read this manual carefully before assembly and use to ensure safe and optimal performance of your chairs. These chairs are designed for versatile use in various indoor settings such as kitchens, dining rooms, or offices, offering both comfort and a stylish aesthetic.
Contenuto della confezione
Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti e integri. La confezione deve contenere:
- 4 x Chair Seats (Padded Velvet Effect)
- 4 x Sets of Chair Legs (Steel, Black Finish)
- Hardware di montaggio necessario (viti, rondelle, chiave a brugola)
Image: A complete set of four tectake 800866 chairs, as received in the package.
Installazione e assemblaggio
Assembly of the tectake 800866 chairs is straightforward and requires minimal tools. It is recommended to assemble the chairs on a soft, clean surface to prevent scratching the floor or the chair components.
- Disimballare i componenti: Carefully remove all chair components and hardware from the packaging. Lay them out to ensure all parts are accounted for.
- Fissare le gambe al sedile: Align the leg frame with the pre-drilled holes on the underside of the chair seat. Insert the provided screws and washers.
- Serrare manualmente le viti: Initially, hand-tighten all screws to allow for minor adjustments. Do not fully tighten yet.
- Regolare e serrare completamente: Once all screws are in place, gently place the chair upright on a flat surface. Apply slight pressure to ensure the chair is level, then fully tighten all screws using the provided Allen key. Ensure all connections are secure.
- Controllare la stabilità: Before use, gently rock the chair to ensure it is stable and does not wobble. If wobbling occurs, loosen the screws slightly, adjust, and re-tighten.
Image: A diagram illustrating the key dimensions of the tectake 800866 chair, useful for understanding its structure during assembly.
Istruzioni per l'uso
The tectake 800866 chairs are designed for comfortable seating in various indoor environments. To ensure longevity and safety, please adhere to the following guidelines:
- Uso previsto: These chairs are intended for indoor use only. Avoid prolonged exposure to direct sunlight or extreme temperatures, which can damage the velvet fabric and frame.
- Capacità di peso: The maximum load capacity for each chair is 120 kg (circa 264 libbre)Non superare questo limite di peso per evitare danni o lesioni.
- Seduta corretta: Sedetevi sempre al centro della sedia. Evitate di salirci sopra o di usarla come sgabello.
- Protezione del pavimento: The chairs are equipped with plastic caps on the feet to protect your flooring. Ensure these caps are intact and clean to prevent scratches.
Image: tectake 800866 chairs in a dining room setting, illustrating their intended use.
Manutenzione e cura
Regular maintenance will help preserve the appearance and extend the lifespan of your tectake 800866 chairs.
- Fabric Care (Velvet Effect):
- For general cleaning, gently vacuum the fabric using an upholstery attachment to remove dust and loose debris.
- In caso di macchie, tamponare immediatamente con un panno pulito e asciutto. Non strofinare, poiché ciò potrebbe estendere la macchia e danneggiare il pelo del velluto.
- For stubborn stains, a mild fabric cleaner designed for velvet or upholstery can be used. Test on an inconspicuous area first. Follow the cleaner's instructions carefully.
- Evitare l'uso di prodotti chimici aggressivi, detergenti abrasivi o umidità eccessiva.
- Frame Care (Steel Legs):
- Wipe the steel legs with a soft, damp panno. Asciugare immediatamente per evitare macchie d'acqua.
- Avoid abrasive cleaners or scouring pads that can scratch the finish.
- Tappi in plastica: Periodically check the plastic caps on the feet for wear or damage. Replace if necessary to continue protecting your floors.
- Controllo hardware: Every few months, check all screws and connections to ensure they remain tight. Re-tighten if loose.
Immagine: Un dettaglio view of the chair's velvet effect upholstery, highlighting the material for care instructions.
Risoluzione dei problemi
Ecco alcuni problemi comuni e le relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La sedia traballa dopo il montaggio. | Screws not tightened evenly or fully. Uneven floor surface. | Loosen all leg screws slightly, place the chair on a flat surface, apply gentle downward pressure, then re-tighten all screws firmly and evenly. Ensure the floor is level. |
| Graffi sul pavimento. | Damaged or missing plastic caps on chair feet. Debris stuck to caps. | Inspect plastic caps. Clean any debris. Replace damaged or missing caps. |
| Fabric appears matted or discolored. | Accumulated dust/dirt. Improper cleaning. Prolonged direct sunlight exposure. | Gently vacuum the fabric. Follow recommended cleaning instructions. Avoid direct sunlight. |
| Rumore stridente durante l'uso. | Collegamenti allentati nel telaio. | Controllare e serrare nuovamente tutte le viti di montaggio. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | TecTake |
| Nome del modello | tectake 800866 |
| Colore | Brown-black |
| Dimensioni del prodotto (L x P x A) | Approx. 58 cm x 62 cm x 82 cm (22.83"W x 24.41"D x 32.28"H) |
| Area di seduta (L x P) | Approx. 40 cm x 42 cm (15.75"W x 16.54"D) |
| Altezza del sedile | Circa 47 cm (18.5 pollici) |
| Altezza dello schienale | Circa 40 cm (15.75 pollici) |
| Height of Armrests from Ground | Circa 63 - 66 cm (24.8 - 26 pollici) |
| Distanza tra i braccioli | Circa 47 cm (18.5 pollici) |
| Capacità di carico massima | 120 kg (264 libbre) |
| Peso dell'articolo (per sedia) | Circa 5.9 kg (13 libbre) |
| Material (Coating) | 100% Polyester (Velvet Effect) |
| Materiale (imbottitura) | Poliuretano |
| Materiale (piedi) | Acciaio |
| Componenti inclusi | 4 sedie |
| Uso interno/esterno | Al chiuso |
Garanzia e supporto
For any questions, concerns, or support regarding your tectake 800866 Padded Velvet Effect Chairs, please contact tectake customer service. While specific warranty details are not provided in this manual, tectake stands behind the quality of its products.
For further assistance, please visit the official tectake store or contact their customer support channels. You can often find support information on the brand's official websito o tramite il rivenditore presso il quale è stato acquistato il prodotto.
Negozio online: Visita lo Store tectake su Amazon