SHEHDS Zoom Par Light LED 18x18W Instruction Manual

1. Introduzione

This manual provides detailed instructions for the safe operation, setup, and maintenance of your SHEHDS Zoom Par Light LED 18x18W. This professional stage lighting fixture features 18x18W RGBWAP 6-in-1 LEDs, offering a wide range of colors and a zoom function from 14 to 45 degrees. It supports DMX512 control, RDM function, sound activation, and various automatic modes, making it suitable for diverse lighting applications.

Image: SHEHDS LED Zoom Par Light illuminating a stage with various colors.

2. Istruzioni di sicurezza

• Collegare sempre l'apparecchio a un circuito con messa a terra per evitare il rischio di folgorazione.
• Garantire la potenza voltage corrisponde al volume specificatotage (AC90-240V, 50/60Hz) before operation.
• Non aprire l'alloggiamento; al suo interno non sono presenti parti riparabili dall'utente. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.
• Evitare l'esposizione diretta degli occhi alla fonte di luce, poiché può causare danni agli occhi.
• Install the fixture in a well-ventilated area, away from heat sources, and ensure proper clearance for cooling.
• Montare saldamente l'apparecchio utilizzando il cl appropriatoamps and safety cables to prevent accidental falls.
• Scollegare l'alimentazione prima di effettuare operazioni di pulizia o manutenzione.

3. Prodotto finitoview

3.1 Caratteristiche

• Sorgente luminosa: 18x18W RGBWAP 6-in-1 LEDs (Red, Green, Blue, White, Amber, Purple).
• Funzione zoom: Adjustable beam angle from 14 to 45 degrees.
• Modalità di controllo: DMX512, Auto-run, Sound Activated, Master/Slave, RDM.
• dimming: Smooth electronic dimming (0-100%).
• Strobe: Variable strobe effects.
• Display: Digital LED display for mode and address settings.
• Alloggiamento: Durable metal construction with a brushed finish.

3.2 Componenti

Familiarize yourself with the main components of the SHEHDS Zoom Par Light:

Immagine: Frontale view of the SHEHDS Zoom Par Light, highlighting the LED array and adjustable bracket.

• Serie LED: 18 high-power RGBWAP LEDs.
• Lente: Optical lenses for beam shaping and zoom functionality.
• Staffa di fissaggio: Adjustable bracket for floor standing or truss mounting.
• Pannello di controllo: Digital display and buttons (MENU, UP, DOWN, ENTER) for settings.
• INGRESSO/USCITA DMX: 3-pin XLR connectors for DMX signal.
• Alimentazione IN/OUT: PowerCon compatible connectors for power daisy-chaining.
• Ventola di raffreddamento: Ventola integrata per la gestione termica.

Immagine: dettagliata view of the rear control panel, showing the digital display, control buttons, DMX IN/OUT, and power connections.

4. Impostazione

4.1 Montaggio

The SHEHDS Zoom Par Light can be mounted in various positions:

• Da pavimento: Use the adjustable bracket to position the light on a flat, stable surface.
• Montaggio su traliccio: Attach appropriate clamps (not included) to the mounting bracket and secure to a truss system. Always use a safety cable.
• Montaggio a parete: Secure the bracket to a sturdy wall using appropriate hardware. Ensure the mounting surface can support the fixture's weight.

Ensure the fixture is securely fastened and that there is sufficient space around it for ventilation.

4.2 Collegamento di alimentazione

Connect the provided power cable to the Power IN port on the fixture and then to a suitable power outlet (AC90-240V, 50/60Hz). Multiple units can be daisy-chained using the Power OUT port, but ensure the total current draw does not exceed the circuit's capacity.

4.3 Connessione DMX

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port of the first fixture. For multiple fixtures, daisy-chain them by connecting the DMX OUT of the first fixture to the DMX IN of the next, and so on. Terminate the last fixture in the chain with a DMX terminator (not included) for optimal signal integrity.

Image: A DMX cable connected to the DMX IN port, showing the secure locking mechanism.

Image: Diagram illustrating the connection of the par light to a DMX controller.

5. Modalità operative

The SHEHDS Zoom Par Light offers several operating modes, selectable via the control panel display.

5.1 Navigazione nel pannello di controllo

Use the following buttons to navigate the menu and adjust settings:

• MENU: Scorre le opzioni del menu principale.
• SU: Increases values or moves up in menu.
• GIÙ: Decreases values or moves down in menu.
• ACCEDERE: Conferma la selezione o accede a un sottomenu.

5.2 Modalità DMX

To operate the fixture with a DMX controller:

1. Premere MENU until "Addr" (Address) appears on the display.
2. Utilizzo SU/GIÙ to set the desired DMX start address (1-512).
3. Premere ENTRARE per confermare.
4. Ensure your DMX controller is sending signals to the set address.

The fixture supports RDM (Remote Device Management), allowing DMX addresses and other settings to be configured remotely via a compatible DMX controller.

5.3 Modalità attivata dal suono

For dynamic lighting synchronized with music:

1. Premere MENU until "Soun" (Sound) appears.
2. Premere ENTRARE to activate. The light will react to ambient sound.
3. Some models may offer sensitivity adjustment via the UP/DOWN buttons.

5.4 Auto-run Mode

To run pre-programmed light shows:

1. Premere MENU until "Auto" appears.
2. Utilizzo SU/GIÙ to select a specific auto program (e.g., A1, A2, A3).
3. Premere ENTRARE per avviare il programma selezionato.

5.5 Modalità Master/Slave

To synchronize multiple fixtures without a DMX controller:

1. Connect all fixtures via DMX cables (DMX OUT to DMX IN).
2. Set the first fixture (Master) to an Auto-run or Sound Activated mode.
3. Set all subsequent fixtures (Slaves) to "SLAV" (Slave) mode via their control panels.
4. The slave units will now mimic the master unit's behavior.

6. DMX Control Channels

The SHEHDS Zoom Par Light typically uses a multi-channel DMX profile. Below is a common channel assignment. Refer to the specific DMX chart provided with your unit for exact details, as channel functions can vary.

Note: This is a generic DMX channel assignment. Always refer to the specific DMX chart provided with your product for accurate channel functions and values.

Image: Visual representation of the adjustable zoom angle feature, showing a purple light beam expanding.

7. Manutenzione

• Pulizia: Regularly clean the lenses and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Ventilatore e prese d'aria: Ensure cooling fan and ventilation openings are free from dust and debris to prevent overheating. Use compressed air if necessary.
• Ispezione dei cavi: Periodically check power and DMX cables for any damage or wear. Replace damaged cables immediately.
• Magazzinaggio: Quando non in uso, conservare l'apparecchio in un ambiente asciutto e privo di polvere, preferibilmente nella confezione originale o in una custodia protettiva.

8. Risoluzione Dei Problemi

9. Specifiche

Image: Product dimensions and weight illustration.

10. Garanzia e supporto

SHEHDS si impegna a fornire prodotti di qualità e a garantire la soddisfazione del cliente.

• Assistenza clienti: Instant customer service is available for any inquiries or assistance.
• Politica di sostituzione: The product is eligible for a 1-month replacement from the date of purchase for manufacturing defects.
• Garanzia: A 1-year warranty covers defects in materials and workmanship.

For support, please refer to the contact information provided with your purchase or visit the official SHEHDS store page.

Image: SHEHDS customer support and warranty information.

11. Video del prodotto

Watch this video for a demonstration of the SHEHDS Zoom Par Light's features and operation.