1. Introduzione
Thank you for choosing the SEBSON HF_OUT_AA Outdoor Motion Detector. This high-frequency sensor is designed for outdoor use, offering reliable motion detection for various lighting applications. It is compatible with LED lamps and features adjustable settings for optimal performance. Please read this manual carefully before installation and use to ensure safe and correct operation.
2. Istruzioni di sicurezza
- L'installazione deve essere eseguita da un elettricista qualificato, in conformità con le normative nazionali in materia di cablaggio.
- Prima di procedere all'installazione, alla manutenzione o alla riparazione, assicurarsi che l'alimentazione sia scollegata.
- The product is rated IP54 for outdoor use, protecting against dust and splashing water. Do not immerse in water.
- Do not open or modify the device. Unauthorized modifications may void the warranty and pose safety risks.
- Tenere i bambini lontani dai materiali di imballaggio.
3. Prodotto finitoview
The SEBSON HF_OUT_AA is an anthracite-colored, surface-mounted motion detector featuring a high-frequency (HF) sensor. It is designed for outdoor applications and offers a wide detection range and adjustable settings.
Figura 3.1: Fronte view of the SEBSON HF_OUT_AA motion detector highlighting its features: 15m/180° detection, LED compatibility up to 300W, IP54 rating, 10 sec - 12 min operating duration, 300° vertical swivel, and 230V operation.
Le caratteristiche principali includono:
- Sensore ad alta frequenza (HF): Detects motion through non-metallic objects, offering broad coverage.
- Ampio range di rilevamento: Fino a 15 metri con un angolo di rilevamento di 180°.
- Durata operativa regolabile: From 10 seconds to 12 minutes.
- Luminosità ambientale regolabile: Operates between 3 and 2000 lux.
- LED compatibile: Supporta LED lamps up to 300W and incandescent bulbs up to 1200W.
- Swiveling Wall Mount: The sensor head can be vertically swiveled up to 300° for precise aiming.
- Design durevole: Grado di protezione IP54 per uso esterno.
4. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Numero di modello | HF_OUT_AA |
| Dimensioni (L x P x A) | Dimensioni: 60 x 93 x 60 mm |
| Peso | 153 grammi |
| Colore | Antracite |
| Materiale | Plastica |
| Alimentazione elettrica | 230 Volt CA |
| Carico massimo (incandescente) | 1200 Watt |
| Carico massimo (LED/Risparmio energetico) | 300 Watt |
| Campo di rilevamento | 15 metri |
| Angolo di rilevamento | 180° |
| Swivel Angle (Vertical) | 300° |
| Operating Duration (TIME) | Da 10 secondi a 12 minuti |
| Luminosità ambientale (LUX) | da 3 a 2000 lux |
| Classe di protezione | Grado di protezione IP54 |
| Tipo di montaggio | Montaggio a parete |
| Temperatura di esercizio | da -20°C a +40°C |
Figure 4.1: Dimensions of the motion detector (87mm width, 93mm height, 60mm depth) and its 180° swiveling capability.
5. Configurazione (installazione)
Before proceeding with installation, ensure the main power supply is switched off at the circuit breaker to prevent electric shock.
5.1 Posizione di montaggio
- Choose a stable wall surface for mounting.
- Avoid mounting near heat sources (e.g., vents, direct sunlight) or objects that might cause false triggers (e.g., moving branches, reflective surfaces).
- The optimal mounting height is typically between 1.5m and 3.5m for effective detection.
5.2 Cablaggio
The motion detector requires a 3-wire connection (Live, Neutral, Switched Live). Refer to the wiring diagram below.
Figure 5.1: Wiring diagram showing connections for Live (L), Neutral (N), and Switched Live (L').
- Open the housing of the motion detector.
- Connect the Live wire (usually brown or red) to the 'L' terminal.
- Connect the Neutral wire (usually blue or black) to the 'N' terminal.
- Connect the Switched Live wire (to the lamp, usually black or brown) to the 'L'' terminal.
- Secure all connections and close the housing.
5.3 Montaggio del dispositivo
Figura 5.2: In basso view of the motion detector, indicating the mounting points.
- Mark the drilling points on the wall using the detector's base as a template.
- Praticare dei fori e inserire i tasselli appropriati.
- Secure the detector to the wall using screws.
- Adjust the sensor head to the desired detection area. The head can swivel vertically up to 300°.
Figure 5.3: The sensor head can be adjusted vertically by 300°.
6. Operating (Settings)
The motion detector features three adjustable dials: LUX, SENS, and TIME. These allow you to customize the sensor's behavior.
Figure 6.1: Adjustment dials for LUX, SENS, and TIME on the side of the motion detector.
6.1 LUX (Ambient Brightness)
This dial controls the ambient light level at which the sensor becomes active. Rotate the dial to set the desired lux level:
- ‘3’ (Moon icon): The sensor will only activate in very dark conditions (approx. 3 lux).
- ‘2000’ (Sun icon): The sensor will activate in all light conditions, including daylight (approx. 2000 lux).
6.2 SENS (Sensitivity)
This dial adjusts the detection sensitivity of the sensor, influencing the range at which motion is detected.
- ‘-’ (Minimum): Lower sensitivity, shorter detection range.
- ‘+’ (Maximum): Higher sensitivity, longer detection range (up to 15m).
6.3 TIME (Operating Duration)
This dial sets how long the connected light remains on after motion is detected and no further motion is sensed.
- Regolabile da 10 secondi a 12 minuti.
- Rotate clockwise for longer duration, counter-clockwise for shorter duration.
Figure 6.2: Illustration of the 180° detection area (5-15m range, 1.5-3.5m height) and detailed views of the LUX, SENS, and TIME adjustment dials.
7. Manutenzione
The SEBSON HF_OUT_AA motion detector requires minimal maintenance.
- Pulizia: Wipe the sensor surface gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ispezione: Periodically check the mounting and wiring for any signs of damage or loose connections.
- Ensure the sensor lens is clear of dirt, dust, or spiderwebs, which can affect performance.
8. Risoluzione Dei Problemi
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende quando viene rilevato un movimento. | 1. Power supply off. 2. Impostazione LUX errata. 3. Lamp difettoso. 4. Wiring error. | 1. Controllare l'alimentazione. 2. Adjust LUX dial towards 'Sun' icon. 3. Sostituire lamp. 4. Check wiring connections (ensure power is off). |
| La luce rimane costantemente accesa. | 1. Constant motion in detection area. 2. TIME setting too long. 3. Wiring error. | 1. Clear detection area of obstructions. 2. Adjust TIME dial to a shorter duration. 3. Check wiring (ensure power is off). |
| La luce si accende senza alcun movimento apparente. | 1. High sensitivity (SENS) setting. 2. Environmental factors (e.g., moving objects, heat sources). | 1. Adjust SENS dial towards '-'. 2. Reposition sensor or clear detection area of interference. |
| Il raggio di rilevamento è troppo breve. | 1. Low sensitivity (SENS) setting. 2. Obstructions in detection path. | 1. Adjust SENS dial towards '+'. 2. Clear obstructions or adjust sensor angle. |
9. Garanzia e supporto
SEBSON products are manufactured with high-quality materials and undergo strict quality control. This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support or further assistance, please contact SEBSON customer service through the retailer's platform or the official SEBSON websito.
