1. Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Immagine 1.1: anteriore view of the SEBSON Outdoor Motion Detector.
2. Istruzioni di sicurezza
Per evitare lesioni o danni al dispositivo, osservare sempre le seguenti precauzioni di sicurezza:
- Sicurezza elettrica: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Garantire il volume di eserciziotage of 230V AC matches your electrical supply.
- Grado di protezione IP44: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montaggio: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- Bambini: Tenere i materiali di imballaggio e le piccole parti fuori dalla portata dei bambini.
3. Contenuto della confezione
Il pacchetto include:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Prodotto finitoview e Caratteristiche
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Campo di rilevamento: Up to 12 meters with a 180° infrared sensor.
- Testa del sensore regolabile: Can be swiveled vertically by 300° for precise area coverage.
- Durata dell'illuminazione regolabile (TIME): From 10 seconds to 7 minutes.
- Luminosità ambientale regolabile (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- LED compatibile: Supporta LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Design durevole: IP44 rated for outdoor use, anthracite color, made of plastic.
Immagine 4.1: Passoview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Configurazione e installazione
Per una corretta installazione, seguire questi passaggi:
- Prepararsi per l'installazione: Prima di iniziare, assicurarsi che l'alimentazione elettrica principale dell'area di installazione sia disattivata tramite l'interruttore automatico.
- Scegli la posizione di montaggio: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montaggio della base:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Praticare i fori nei punti contrassegnati. Inserire i tasselli appropriati se necessario.
- Secure the detector's base firmly to the wall using screws.
- Collegamenti elettrici: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Immagine 5.1: Es.ample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Alloggiamento vicino: Carefully close the detector housing, ensuring no wires are pinched.
- Ripristina alimentazione: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Istruzioni per l'uso e regolazioni
The motion detector features two adjustable dials for customizing its operation:
Immagine 6.1: Primo piano view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Turn the dial towards the icona del sole for activation in brighter conditions (e.g., during the day).
- Turn the dial towards the icona della luna for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Manutenzione
Per garantire prestazioni ottimali e longevità del tuo rilevatore di movimento:
- Pulizia: Regularly clean the sensor lens and the outer casing con un morbido, asciutto o leggermente damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- Ispezione: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Fattori ambientali: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Risoluzione Dei Problemi
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende quando viene rilevato un movimento. |
|
|
| La luce rimane accesa in modo continuo o si accende in modo casuale. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Specifiche
| Caratteristica | Specificazione |
|---|---|
| Produttore | SEBSON |
| Numero di modello | IR_OUT_BA |
| Dimensioni del prodotto (L x P x A) | Dimensioni: 8.6 x 6 x 9.6 cm |
| Peso | 155 grammi |
| Colore | Antracite |
| Materiale | Plastica |
| Fonte di alimentazione | AC |
| Voltage | 230 Volt |
| Max. Power (LED) | 300 Watt |
| Potenza massima (incandescente) | 1200 Watt |
| Metodo di installazione | Montaggio a parete (montaggio in superficie) |
| Compatibilità del tipo di lampadina | GUIDATO |
| Campo di rilevamento | 12m / 180° |
| Swiveling Angle | 300° (verticale) |
| Durata dell'illuminazione (TIME) | 10 secondi - 7 minuti |
| Luminosità ambientale (LUX) | 3 - 2000 lux |
| Grado di protezione IP | Grado di protezione IP44 |
| Usi consigliati | All'aperto |
| Temperatura nominale superiore | 40 gradi Celsius |
| Paese di origine | Cina |
10. Garanzia e supporto
Politica di ritorno: Questo prodotto può essere restituito entro 30 giorni dall'acquisto, in conformità con la politica di reso del rivenditore.
Assistenza clienti: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
