Introduzione
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
Caratteristiche del prodotto
- AccuSet Automatic Time Set: Pre-programmed time for immediate use.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for time changes.
- High/Low Dimmer Control: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- Selezione del fuso orario: Easily select your local time zone.
Sopraview of the SHARP Digital Alarm Clock's primary features.
Impostare
- Disimballare l'orologio: Estrarre con cautela l'orologio dalla confezione.
- Seleziona il fuso orario: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- Collegare: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- Impostazione dell'ora legale (DST): If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
Istruzioni per l'uso
Impostazione della sveglia
The alarm function is controlled by buttons located on the top of the clock.
- Imposta ora sveglia: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- Attiva/Disattiva sveglia: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- Funzione snooze: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
Controllo dimmer
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewing.
Dettagliato view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
Batteria di backup
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
Per sostituire la batteria:
- Unplug the clock from the electrical outlet.
- Individuare il vano batterie nella parte inferiore dell'orologio.
- Unscrew the cover and remove the old CR2032 battery.
- Inserire una nuova batteria CR2032, garantendo la corretta polarità.
- Replace the cover and screw it securely.
- Plug the clock back into the electrical outlet.
Specifiche
| Caratteristica | Descrizione |
|---|---|
| Marca | AFFILATO |
| Modello | B08TG8W2QD |
| Colore | Midnight Black-white Led |
| Tipo di visualizzazione | Digitale |
| Caratteristica speciale | Automatic Set |
| Dimensioni del prodotto | 5.5"L x 2.6"A |
| Fonte di alimentazione | Elettrico con cavo, alimentato a batteria |
| Batteria di backup | CR2032 (preinstallato) |
| Peso dell'articolo | 10.2 once (0.29 chilogrammi) |
| Materiale del telaio | Plastica |
Physical dimensions of the alarm clock.
Risoluzione dei problemi
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- Display troppo luminoso/scurato: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- L'allarme non suona: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
Manutenzione
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- Pulizia: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Sostituzione della batteria: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- Posizionamento: Posizionare l'orologio su una superficie stabile e piana, lontano dalla luce solare diretta, da calore eccessivo o dall'umidità.
Garanzia e supporto
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP websito. Conservare la ricevuta di acquisto poiché potrebbe essere richiesta la prova d'acquisto per le richieste di garanzia.