Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC Factory Remote Activated Start System. This system is designed to integrate seamlessly with your vehicle's existing factory key fobs, allowing for convenient remote engine starting.
Important Vehicle Requirements
- Compatibilità del veicolo: This system is compatible with 2012-2016 Chrysler Town & Country models.
- Tipo di trasmissione: Automatic Transmission ONLY.
- Tipo di carburante: Gas Engine - Not for Hybrid vehicles.
- Tipo di accensione: Designed for Push-to-Start ignition systems. This product does NOT work with traditional key-start cars.
- Geographic Region: Product may not function in vehicles manufactured for sale outside of the U.S. & Canada.
Cosa è incluso
Your remote start system package includes the following components:
- All-in-one remote starter data interface module.
- Vehicle-specific T-Harness for plug-and-play installation.
- Firmware preloaded for your specific vehicle.
- All necessary components for installation.
Configurazione e installazione
This kit features a plug-in T-Harness design, significantly reducing the number of wiring connections typically required for remote start systems. Installation primarily involves plug-in connections. Concise instructions with plug locations are provided to facilitate a seamless installation process. Basic knowledge of car electronics wiring is recommended for successful installation.
Identifying Your Key Type
It is crucial to correctly identify your vehicle's key type to ensure compatibility and proper installation of the remote start system. The video below explains how to differentiate between various Chrysler key types.
Processo di installazione terminatoview
The installation involves accessing the vehicle's ignition system, typically located behind the lower dash panel. The T-Harness simplifies this process by allowing direct connection to existing plugs.
Passaggi di installazione dettagliati
For a visual guide on the installation process, please refer to the video below. While the video may feature a slightly different model year (2008-2010) or a Dodge Ram, the wiring and programming procedures for the Chrysler Town & Country are generally similar.
Valet Switch (Optional)
Your kit may include a valet switch, which can be used to temporarily disable the remote start system. If you choose not to use this feature, you can tuck the switch under the dash or cut it off and insulate the wire ends separately.
Istruzioni per l'uso
This remote start system is designed to work with your vehicle's existing factory key fobs. No additional remotes are required.
To Remote Start Your Vehicle:
- Ensure your vehicle is in Park and all doors are closed.
- Premere il tasto "lock" pulsante sul telecomando di fabbrica tre (3) volte consecutivamente.
- Allow approximately one second between each press.
- The vehicle's lights will flash, and the engine will start.
This feature allows you to warm or cool your vehicle from a distance, enhancing comfort.
To Shut Down Remote Start:
You can shut down the remote start system by either pressing the brake pedal inside the vehicle or by pressing the "lock" button on your factory remote three (3) more times.
To Drive After Remote Start:
Unlock the vehicle doors with your remote. Without pressing the brake, insert your key into the ignition and turn it to the ON/RUN position. The vehicle will then operate normally.
Manutenzione
The MPC remote start system is designed for minimal maintenance. Ensure all connections remain secure and free from moisture or damage. Periodically check for any loose wiring or unusual operation. No user-serviceable parts are inside the module.
Risoluzione dei problemi
If you encounter issues with your remote start system, consider the following common troubleshooting steps:
- Il sistema non si avvia: Verify that the vehicle is in Park, all doors are closed, and the hood is securely latched. Ensure the factory remote's battery is not depleted.
- Incorrect Key Type: Confirm your vehicle has a Push-to-Start ignition. The system is not compatible with traditional key-start vehicles. Refer to the "Identifying Your Key Type" video in the Setup section.
- Problemi di programmazione: If the system is not responding, re-attempt the programming steps as outlined in the installation guide.
- Modalità Valet: Check if the valet switch (if installed) is in the OFF position, which disables the remote start function.
For persistent issues, please contact MPC Technical Support.
Specifiche
- Peso dell'articolo: 2 libbre
- Dimensioni del prodotto: 8 x 5 x 2 pollici
- Numero modello articolo: B-4966-179
- Produttore: MPC Products
Informazioni sulla garanzia
MPC remote starters and alarms carry a limited lifetime warranty through the manufacturer. Physical damage or damage resulting from improper installation will void the manufacturer's warranty.
- Primo anno: Contact MPC for warranty issues. The product must be returned at the customer's expense for warranty service.
- After First Year: Warranty issues must be handled directly through the manufacturer. A receipt from the original purchase will be required.
The product is warranted to the end user, when properly installed and under normal conditions of use, to be free from defects in workmanship and materials for a period of one year from the provided date of purchase, to the original purchaser. This warranty does not cover abuse, operation inconsistent with the product's design, or damage from environmental exposure. If a defect is deemed "under warranty," MyPushcart will, at its option, repair or replace the product free of charge. MyPushcart is not liable for installation charges, loss, or damage incurred during replacement or repair of any warranted product.
Supporto tecnico
MPC offers premier USA-based technical support from Tucson, AZ. Several different methods of support are available to assist you with any questions or installation guidance. QR code instructions are included with your product to ensure access to the most up-to-date information.
