Manuale utente del kit microfono dinamico professionale Pyle da 3 pezzi

1. Introduzione

This manual provides detailed instructions for the setup, operation, and maintenance of your Pyle 3-Piece Professional Dynamic Microphone Kit (Model PDMICKT34). This kit is designed for reliable studio and stage performance, offering high-quality audio capture for vocals and ampstrumenti lificati.

The kit includes three handheld dynamic microphones, three XLR audio cables, a hard carry case, microphone holders/clips, and an On-Stage foam ball-type microphone windscreen.

Figure 1: Complete Pyle 3-Piece Professional Dynamic Microphone Kit, including three microphones, cables, carry case, and a foam windscreen.

2. Componenti del prodotto

The PDMICKT34 kit includes the following items:

• Three (3) Pyle Handheld Dynamic Microphones: Each microphone features a unidirectional moving coil element and an ON/OFF switch.
• Three (3) XLR to 1/4'' Audio Cables: Each cable is approximately 26 feet long, designed for connecting the microphones to audio equipment.
• Three (3) Microphone Holders/Clips: For mounting the microphones on stands.
• One (1) Hard Carry Case: Provides secure storage and transport for the microphones and accessories.
• One (1) On-Stage Foam Ball-Type Microphone Windscreen (Black): Reduces wind interference and plosive sounds.
• One (1) Warranty Card: Contains information regarding product warranty.

3. Istruzioni per l'installazione

1. Disimballare i componenti: Carefully remove all items from the hard carry case.
2. Attach Microphone Holder: If using a microphone stand, screw the microphone holder/clip onto the stand's threaded top.
3. Inserisci microfono: Gently insert one of the Pyle dynamic microphones into the microphone holder/clip. Ensure it is securely seated.
4. Collegare il cavo XLR:
   • Connect the XLR end of the audio cable to the XLR port at the base of the microphone. Ensure it clicks into place.
   • Connect the 1/4'' (6.35mm) end of the audio cable to the microphone input on your mixer, amplifier o interfaccia audio.
5. Applicare il parabrezza (facoltativo):

   For improved sound clarity and protection against plosives (e.g., 'p' and 'b' sounds) and wind noise, gently slide the foam windscreen over the microphone's grill. Ensure it covers the entire mesh area.

   

   Figure 2: The included foam ball-type microphone windscreen, shown from top and angled views.

4. Istruzioni per l'uso

The Pyle dynamic microphones are designed for straightforward operation.

• Accensione/spegnimento: Each microphone is equipped with an ON/OFF slide switch located on the microphone body.
  • Per attivare il microfono, spostare l'interruttore in posizione "ON".
  • Slide the switch to the "OFF" position to deactivate the microphone. It is recommended to turn off the microphone when not in use or when connecting/disconnecting cables to prevent pops or damage to connected equipment.
  

  Figure 3: Detail of the ON/OFF switch on the microphone body, allowing for quick stage controllo.
• Posizionamento del microfono:

  These microphones feature a unidirectional (cardioid) pickup pattern. This means they are most sensitive to sound coming from directly in front of the microphone and least sensitive to sounds from the sides and rear. This design helps to minimize background noise and feedback, making them ideal for vocal performances and recording ampstrumenti lificati.

  • For vocals, position the microphone directly in front of the speaker's mouth.
  • For instruments, aim the microphone directly at the sound source (e.g., guitar amplifier speaker, drum head).
• Controllo di guadagno: Adjust the gain (input level) on your mixer or audio interface to achieve a strong signal without clipping or distortion. Start with the gain low and gradually increase it while speaking or singing into the microphone.

5. Manutenzione

Proper care and maintenance will extend the lifespan of your microphone kit.

• Cleaning Microphones:
  • Wipe the microphone body with a soft, dry cloth.
  • For the mesh grill, use a soft brush (like a clean toothbrush) to gently remove any debris. Do not use liquid cleaners directly on the grill or internal components.
• Cura del cavo:
  • Quando si collega o si scollega un dispositivo, afferrare sempre il connettore e non il cavo.
  • Coil cables neatly after use to prevent tangling and damage. Avoid sharp bends or kinks.
• Cura del parabrezza:
  • The foam windscreen can be gently hand-washed with mild soap and water if it becomes dirty. Rinse thoroughly and allow it to air dry completely before re-using.
• Magazzinaggio:
  • Store all components in the provided hard carry case when not in use to protect them from dust, moisture, and physical damage.

6. Risoluzione Dei Problemi

Se riscontri problemi con il tuo kit microfono, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

7. Specifiche tecniche

Detailed specifications for the Pyle Dynamic Microphones (PDMICKT34):

• Elemento microfono: Ipercardioide
• Modello di raccolta: Bobina mobile unidirezionale
• Mic Construction Material: Lega di zinco
• Audio Cable Connectors: XLR to 1/4''
• Lunghezza cavo XLR: 26+ piedi
• Sensibilità al circuito aperto: -54 dB
• Risposta in frequenza: Da 60 Hz a 15 kHz
• Impedenza di uscita: 600 Ohm, +/-3dB (0dB=1V/Pa @ 1kHz)
• Mic Dimensions (L x W): 6.7'' x 1.8'' (Each)
• Peso del microfono: 0.61 lbs. (Each)

Figura 4: Dimensionale suview of a single Pyle microphone and the included XLR to 1/4'' audio cable.

8. Garanzia e supporto

Pyle stands behind the quality of its products.

• Limited 1-Year Manufacturer Warranty: This product is covered by a limited 1-year manufacturer warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
• Garanzia di soddisfazione di 30 giorni: If this item fails to meet your expectations, it may be returned for a full refund within the first 30 days of purchase.
• Assistenza clienti: For warranty claims, technical assistance, or any questions regarding your Pyle product, please refer to the contact information provided on the warranty card included in your kit or visit the official Pyle websito per i dettagli del supporto.