Manuale utente dell'avviatore portatile per auto GOOLOO GP3000 3000A

1. Introduzione

The GOOLOO GP3000 is a versatile and powerful portable car jump starter designed to provide reliable starting power for a wide range of vehicles. Beyond its primary function of jump starting, it also serves as a portable power bank for electronic devices and features an integrated LED flashlight. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your GP3000 unit.

2. Contenuto della confezione

Si prega di controllare la confezione per verificare la presenza dei seguenti elementi:

• GOOLOO GP3000 SuperSafe Portable Car Battery Jump Starter
• Cavi di avviamento per impieghi gravosi
• Cavo da USB a tipo C
• Cavo da tipo C a tipo C
• Borsa portaoggetti
• Manuale d'uso

Figure 2.1: All items included in the GOOLOO GP3000 package

3. Prodotto finitoview

Familiarize yourself with the components and ports of your GOOLOO GP3000 unit.

Figure 3.1: GOOLOO GP3000 Jump Starter with Smart Jumper Cables

Figura 3.2: dettagliata view of GOOLOO GP3000 ports and LED indicators

• Porta del cavo jumper: Connects the heavy-duty jumper cables for vehicle jump starting.
• Uscita 15V/10A: Provides power for 12V DC devices such as tire inflators or car refrigerators.
• In/Out Type-C (15W): Used for charging the jump starter itself or charging compatible electronic devices.
• Uscita USB 5V/2.1A: Standard USB port for charging electronic devices.
• USB 5V/9V/12V Quick Charge Output: Quick charge port for compatible devices, offering faster charging speeds.
• Luce LED: Torcia integrata con più modalità.
• Power Button & LED Indicators: Activates the unit and displays the battery charge level.

4. Ricarica dell'avviatore di emergenza

Before initial use, fully charge your GOOLOO GP3000. To charge the unit:

1. Connect the provided Type-C cable to the 'In/Out Type-C' port on the jump starter.
2. Connect the other end of the Type-C cable to a compatible USB wall charger (not included) or car charger (not included).
3. The LED indicators will illuminate to show the charging progress. All four lights will be solid when fully charged.

For optimal performance and longevity, it is recommended to recharge the unit every 1-3 months, especially during its 24-month standby time.

5. Istruzioni per l'uso: avviamento di emergenza di un veicolo

The GOOLOO GP3000 is designed to safely jump start vehicles with up to 9.0L gasoline engines and 7.0L diesel engines.

Precauzioni di sicurezza:

• Ensure the jump starter is adequately charged before use.
• Collegare sempre il clamps to the correct battery terminals (red to positive, black to negative). The SUPERSAFE technology automatically detects reverse polarity to prevent damage.
• Non avviare il motore per più di 3 secondi per tentativo. Attendere almeno 30 secondi tra un tentativo e l'altro.
• Non lasciare l'avviatore di emergenza collegato alla batteria del veicolo dopo averlo avviato.

Passaggi per l'avviamento di emergenza:

1. Collegare i cavi jumper: Insert the blue plug of the heavy-duty jumper cables into the jumper cable port on the GOOLOO GP3000.
2. Collegamento alla batteria del veicolo: Attaccare il rosso (+) clamp al terminale positivo della batteria del veicolo. Collegare il polo nero (-)amp al terminale negativo della batteria del veicolo.
3. Indicatore di controllo: The indicator light on the smart jumper cable will show green if the connection is correct and the battery voltage is sufficient for a normal start. If the battery voltage is very low or there is no battery, the indicator might not show green immediately.
4. Avviare il veicolo: Once the green light is solid (or if using BOOST mode, see below), start your vehicle.
5. Rimuovere i cavi: After the vehicle starts, immediately remove the black (-) clamp from the vehicle battery, then the red (+) clamp, and finally disconnect the jumper cables from the jump starter.

Using the "BOOST" Function (for very low/dead batteries):

Se il volume della batteria del tuo veicolotage is extremely low (below 8V) or completely dead, the smart jumper cable might not show a green light. In this case, you can use the "BOOST" function:

1. Connect the jumper cables to the jump starter and then to the vehicle battery as described above.
2. Press and hold the "BOOST" button on the smart jumper cable for 3 seconds. The indicator light will turn solid green.
3. Avviare il veicolo entro 30 secondi.
4. Una volta avviato il veicolo, rimuovere immediatamente il clamps in ordine inverso.

Figure 5.1: GOOLOO GP3000 connected to a car battery for jump starting

Figure 5.2: GOOLOO GP3000 Smart Jumper Cables with reverse polarity protection

Dimostrazione video:

Video 5.1: Demonstration of the GOOLOO Portable Car Battery Jump Starter (GP2000 model shown) in action, highlighting its ease of use for starting a vehicle.

Video 5.2: Oltreview of the GOOLOO portable car jump starter battery pack (GP2000 model shown), showcasinle sue caratteristiche e i suoi accessori.

6. Utilizzo come power bank portatile

The GP3000 features multiple USB ports to charge your electronic devices.

Figure 6.1: GOOLOO GP3000 charging multiple electronic devices

• Connect your device's charging cable to either the USB 5V/2.1A port, the USB 5V/9V/12V Quick Charge port, or the In/Out Type-C port.
• Press the power button on the GP3000 to begin charging.
• The 15V/10A output port can power 12V DC devices like tire inflators or car refrigerators (adapter cable may be required).

7. Funzioni della torcia a LED

La luce LED integrata fornisce illuminazione per diverse situazioni.

Figure 7.1: User utilizing the GOOLOO GP3000's integrated LED flashlight

1. Per accendere/spegnere: Tenere premuto il pulsante di accensione per 3 secondi.
2. Per scorrere le modalità: Once the light is on, short press the power button to cycle through modes: Flashlight (steady light) → Strobe Light → SOS Signal.

8. Specifiche

9. Manutenzione e conservazione

• Conservare l'avviatore di emergenza in un luogo fresco e asciutto, lontano dalla luce solare diretta e dalle alte temperature.
• Recharge the unit every 1-3 months to maintain optimal battery health, even if not in use.
• Pulire l'unità con un panno asciutto e morbido. Non utilizzare prodotti chimici aggressivi o materiali abrasivi.
• Mantenere le porte libere da polvere e detriti.

10. Risoluzione Dei Problemi

11. Garanzia e supporto

GOOLOO offers a comprehensive warranty for your GP3000 jump starter:

• Garanzia di rimborso entro 30 giorni: Within the first 30 days after your purchase, you can apply for a return for a full refund if you are not satisfied.
• 30 Days to 12 Months (18 Months for Member Customers): We will replace the defective unit due to manufacturing issues with a new one within 12 months (18 months for registered member customers).

For further assistance or to extend your warranty, please refer to the contact information provided in your warranty card or visit the official GOOLOO websito.