DALY Smart BMS Li-ion 13S 48V 100A Instruction Manual

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your DALY Smart BMS Li-ion 13S 48V 100A with Programmable Bluetooth Module. This Battery Management System is designed to protect lithium batteries, ensuring their safe and efficient operation.

Le caratteristiche principali includono:

• Fully programmable smart BMS with Bluetooth connectivity for Android and iPhone applications.
• Common port for both charge and discharge, supporting up to 100A continuous discharge and 50A charge current.
• High-precision detection for over-charge, over-discharge, and voltage bilanciamento.
• Protection against over-current, over-voltage, and low-temperature charging (down to -1°C).
• Precise State of Charge (SOC) calculation with automatic learning function.
• Automatic battery charging and static balance functions.
• Mobile phone software for monitoring battery status and parameter settings via Bluetooth.

Figure 1: DALY Smart BMS with Bluetooth module and connection cables.

2. Informazioni sulla sicurezza

• Do not charge at temperatures below -1°C.
• Avoid over-charging or over-discharging the battery.
• Be aware of potential interference with other wireless devices when using the Bluetooth module.
• Ensure all wiring connections are secure and correct before powering on the system. Incorrect wiring can cause damage to the BMS or battery.
• Always follow local regulations and safety standards when working with lithium batteries.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• SMART BMS unit (1)
• Balance wires (1 set)
• Bluetooth module (1) for Mobile APP (iOS & Android)
• UART cable (1) for PC connection
• English version wiring manual (1)

Figure 2: Typical package contents for the DALY Smart BMS.

4. Configurazione e installazione

4.1. Schema elettrico

Refer to the following diagram for correct wiring of the BMS to your battery pack, motor/load, and charger. Ensure all connections are made accurately to prevent damage.

Figure 3: DALY Smart BMS wiring diagram.

Note importanti sul cablaggio:

• Balance Wires: Disconnect balance wires white end and BMS connection port before welding black and red balance wires on the battery pack. After confirming the balance wires are correctly welded and installed, connect them to the BMS.
• BMS Placement: Keep the BMS red cooling surface uncovered to ensure proper heat dissipation.
• Utensili: Recommended tools include a soldering machine (suggested 662°F/350°C), scissors, double-sided tape, tin wire, and a multimeter.

4.2. Attivazione iniziale

After connecting all wires, activate the smart BMS using one of the following methods:

1. Press the activation button on the Bluetooth module.
2. Connect a charger to the battery pack.

The internal resistance of the BMS should be approximately 0Ω (multimeter deviation 0.1Ω when conducted).

5. Funzionamento

5.1. Applicazione mobile (Bluetooth)

The DALY Smart BMS can be monitored and configured via a mobile application available for iOS and Android devices. Cercare "Smart BMS" in your device's app store.

1. Download and install the "Smart BMS" application.
2. Open the app and connect to the corresponding Bluetooth device ID (e.g., DL-XXXXXXXX).
3. Configurazione iniziale: For the first power-on, the battery capacity must be set to the actual capacity of your battery pack. The initial password for parameter settings is 123456.
4. Monitoraggio: View real-time battery parameters such as total voltage, current, State of Charge (SOC), individual cell voltage temperatura.
5. Impostazioni dei parametri: Adjust protection parameters like over-charge/over-discharge voltage limits, over-current limits, and temperature protection settings.

Figure 4: Mobile app displaying real-time battery data.

Figure 5: Mobile app displaying protection functions and settings.

5.2. PC Software (UART)

For more advanced monitoring and configuration, connect the BMS to a computer using the provided UART cable. The PC software allows for detailed parameter adjustments and data logging.

The PC software interface provides a comprehensive view of battery status, including individual cell voltages, temperatures, and protection settings. You can also perform calibration and reset functions through this interface.

6. Manutenzione

6.1. Battery Balancing

The DALY Smart BMS features an automatic static balance function for the battery system. This helps to equalize the voltage across individual cells, prolonging battery life and improving performance. The balancing function is typically active during charging.

6.2. Gestione della temperatura

The BMS includes programmable temperature protection. Ensure the BMS is installed in a location that allows for adequate airflow, especially around the red cooling surface, to prevent overheating during high current operation.

7. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your DALY Smart BMS.

8. Specifiche

The following table details the specifications for the DALY Smart BMS Li-ion 13S 48V 100A model:

Figure 6: DALY Smart BMS dimensions and key specifications.

9. Supporto e garanzia

For technical support, troubleshooting assistance, or warranty inquiries, please contact DALY customer service. Refer to the official DALY websito o nella documentazione di acquisto per i dettagli di contatto.

Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.