Qinlorgo Pressure Sensors Display Module RP-C-MK01-1 User Manual

1. Prodotto finitoview

The Qinlorgo RP-C-MK01-1 Pressure Sensors Display Module is designed for the measurement and display of data from flexible, film pressure, and force sensors. This compact module offers clear readings and is powered by a rechargeable lithium battery for extended use.

Caratteristiche principali:

• Flexible Sensor Compatibility: Specifically designed for RP-C series flexible sensors.
• Plexiglass Display: Provides clear, accurate, and efficient readings.
• Basso consumo energetico: Garantisce una lunga durata della batteria.
• Ricarica USB: Conveniently rechargeable via a standard 5V mobile phone charger.
• Design compatto: Small size for easy portability and storage.

Figura 1: Fronte view of the Qinlorgo Pressure Sensors Display Module.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1 x Pressure Sensor (RP-C series)
• 1 x Display Module (RP-C-MK01-1)

Figure 2: The pressure sensor and display module as a system.

3. Istruzioni per l'installazione

3.1 Connecting the Pressure Sensor

1. Locate the sensor input port on the display module. This is typically a small connector designed for the RP-C series sensor.
2. Carefully align the connector of the pressure sensor with the port on the display module.
3. Gently push the sensor connector into the module's port until it is securely seated. Do not force the connection.

Figura 3: Esample of a pressure sensor connected to the display module and in use.

3.2 Alimentazione del modulo

1. Ensure the module is charged or has sufficient battery life.
2. Locate the power switch (labeled 'ON' or similar) on the module.
3. Slide the switch to the 'ON' position to power on the device. The display should illuminate.

4. Istruzioni per l'uso

4.1 Lettura dei valori di pressione

Once the sensor is connected and the module is powered on, the display will show real-time pressure readings. The unit of measurement (e.g., grams) will be indicated on the screen.

• Apply pressure to the connected flexible sensor.
• Observe the corresponding value change on the module's display.
• The display may also show maximum (MAX) and minimum values recorded, depending on the firmware version.

4.2 Charging the Module

The module is equipped with a lithium battery and can be charged using a standard USB 5V mobile phone charger.

1. Locate the USB-C charging port on the module.
2. Connect a USB-C cable to the module and the other end to a 5V USB power source (e.g., phone charger, computer USB port).
3. The charging indicator (if present) will show the charging status. A full charge typically takes approximately 3.5 hours.

5. Manutenzione

5.1 Pulizia

• Use a soft, dry cloth to clean the display screen and module casing.
• Evitare l'uso di detergenti abrasivi, solventi o umidità eccessiva, poiché potrebbero danneggiare il dispositivo.

5.2 Cura della batteria

• To prolong battery life, avoid fully discharging the module frequently.
• Store the module in a cool, dry place when not in use for extended periods.

6. Risoluzione Dei Problemi

7. Specifiche tecniche

Figure 4: Dimensions of the display module.

8. Garanzia e supporto

This product is manufactured under strict quality control standards. For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Please have your product model number (RP-C-MK01-1) and purchase details available when contacting support.