Lepro Solar Motion Sensor Light Instruction Manual

Introduzione

Thank you for choosing the Lepro Solar Motion Sensor Light. This manual provides essential information for the safe and efficient use of your new solar light. Please read it thoroughly before installation and retain it for future reference.

This product features a separated solar panel and light body, connected by a 4.8-meter extension cable, allowing flexible placement. It is designed for outdoor use, offering 1000 lumens of ultra-bright, 3-sided illumination with a 360-degree adjustable angle. The light is IP65 waterproof and equipped with a motion sensor for automatic activation.

Contenuto della confezione

• Motion Sensor Light x 2
• Wall Mount Holder x 2
• Viti x 8
• Spina a muro x 8
• Manuale di istruzioni x 1

Image: Package contents showing two light units, mounting hardware, and the instruction manual.

Istruzioni di installazione

1. Scegli una posizione: Select a location for the solar panel where it can receive 6-8 hours of direct sunlight daily for optimal charging. The light unit can be placed up to 4.8 meters away from the solar panel thanks to the extension cable.
2. Montare il supporto: Use the provided screws and wall plugs to securely attach the wall mount holder to your desired surface.
3. Fissare l'unità luminosa: Slide the solar light unit onto the mounted holder until it clicks into place.
4. Collegare il cavo: Insert the cable from the solar panel into the light unit's port. Ensure a firm connection.
5. Attiva la luce: Locate the ON/OFF button on the back of the light unit. Press it to turn the unit ON. The light will only activate in dark environments when motion is detected.

Image: Detail of the light unit sliding into the mounting bracket.

Image: Step-by-step installation guide for the solar light.

Istruzioni per l'uso

Funzionalità del sensore di movimento

The Lepro Solar Motion Sensor Light is designed to operate automatically. Once activated (ON position), it will:

• Charge during the day using solar energy.
• Remain off during daylight hours.
• Automatically turn on for approximately 20 seconds when motion (human or vehicle) is detected in a dark environment.
• Automatically turn off after 20 seconds if no further motion is detected.

The motion sensor has a detection range of up to 8 meters and a 120-degree angle. The light's two side panels can be rotated 360 degrees, allowing you to adjust the illumination direction and coverage area.

Image: Motion detection range and activation at night.

Image: Automatic charging during the day and 20-second illumination at night.

Regolazione dei pannelli luminosi

The two side light panels can be manually rotated 360 degrees to direct light precisely where needed, providing a wide 270-degree illumination angle.

Image: Adjustable light panels and separated solar panel design.

Manutenzione

Pulizia

To ensure optimal performance, periodically clean the solar panel and light surface. Dust, dirt, or debris can reduce charging efficiency and light output. Use a soft, damp cloth to wipe the surfaces gently. Avoid abrasive cleaners or harsh chemicals.

Resistenza alle intemperie

The Lepro Solar Motion Sensor Light is designed with an IP65 waterproof rating and constructed from durable ABS material, making it resistant to heat and freezing temperatures. It can safely operate in various weather conditions, including heavy rain, snow, and extreme temperatures.

Image: IP65 waterproof and weather-resistant features.

Risoluzione dei problemi

• La luce non si accende di notte:
  • Ensure the ON/OFF button on the back of the unit is pressed to the ON position.
  • Verify the solar panel is receiving 6-8 hours of direct sunlight daily. Partial charging may occur on cloudy days, but full charge requires direct sun.
  • Check if there are other strong light sources nearby. The motion sensor light is designed to activate only in dark environments.
  • The internal battery might be depleted. Allow several days of full sunlight charging.
• La luce rimane accesa costantemente o lampeggia:
  • Assicurarsi che non vi sia alcun movimento continuo all'interno del raggio di rilevamento del sensore.
  • Check for any obstructions or reflective surfaces that might be triggering the sensor.
• L'emissione luminosa è debole:
  • Clean the solar panel and light surface to remove any dirt or debris that may be hindering performance.
  • Assicurarsi che il pannello solare sia posizionato per la massima esposizione al sole.
  • The battery may not be fully charged. Allow more time for charging in direct sunlight.

Specifiche del prodotto

Garanzia e supporto

For information regarding product warranty, please refer to the documentation included with your purchase or visit the official Lepro website. Optional protection plans may be available for purchase from third-party providers.

For customer support, technical assistance, or to view the latest user manual PDF data, please visit the Lepro Store su Amazon or contact Lepro customer service directly.