ILM Bluetooth Motorcycle Helmet User Manual

Image: The ILM Bluetooth Modular Motorcycle Helmet in Matte Black, showcasing its design and integrated Bluetooth system.

1. Informazioni importanti sulla sicurezza

This ILM Bluetooth Motorcycle Helmet meets or exceeds FMVSS 218 DOT safety standards. Always wear your helmet correctly and ensure all components are securely fastened before riding. Improper use can lead to serious injury or death.

For detailed safety guidelines, please refer to the official Safety Information PDF document provided with your helmet or available online. Scarica le informazioni sulla sicurezza (PDF)

Vestibilità del casco: A properly fitting helmet is crucial for safety. The helmet should fit snugly around your head without causing pressure points. If the helmet feels too loose or too tight, contact ILM customer service for assistance with inner pad sizing.

Immagine: Posteriore view of the ILM helmet, showing the DOT certification sticker. This confirms the helmet meets safety standards.

2. Contenuto della confezione

Your ILM Bluetooth Motorcycle Helmet package includes the following items:

• ILM Bluetooth Motorcycle Helmet (1 unit)
• Batteria (1 unità)
• Cavo USB (1 unità)
• Universal Charger (1 unit)
• Manuale dell'utente (questo documento)
• Black Helmet Bag (1 unit)

Image: The accessory box containing the instruction manual, USB cable, charger, and battery for the helmet's Bluetooth system.

3. Configurazione e installazione

3.1 Ricarica del sistema Bluetooth

Before initial use, fully charge the helmet's Bluetooth system battery. Connect the provided USB cable to the charging port on the Bluetooth unit and plug it into the universal charger. A full charge provides approximately 12 hours of phone talk time, 9 hours of intercom talk time, and 120 hours of standby.

Note: If the Bluetooth system has not been used for an extended period, the battery may enter a deep sleep mode. To reactivate, charge the unit for approximately 30 minutes. Bluetooth functionality will be restored after this charging period.

Image: Visual representation of the battery performance, indicating standby time, intercom talk time, and phone connection time.

3.2 Associazione Bluetooth

To pair your helmet's Bluetooth system with your mobile phone or other Bluetooth device:

1. Ensure the helmet's Bluetooth system is powered off.
2. Press and hold the main function button on the Bluetooth unit until the indicator light flashes red and blue alternately, indicating pairing mode.
3. Sul tuo cellulare, attiva il Bluetooth e cerca i dispositivi disponibili.
4. Select "ILM Helmet" or a similar name from the list of devices.
5. If prompted, enter the PIN "0000" (if required).
6. Una volta effettuata l'associazione, la spia luminosa lampeggerà lentamente in blu.

Image: The Bluetooth control unit, showing the volume controls and a phone icon, indicating its function for calls and audio.

3.3 Intercom System Setup

The ILM Bluetooth helmet supports group intercom communication. The 902BT PRO model supports 6-8 riders, while the standard 902BT supports 2-3 riders. Intercom communication is compatible with ILM 953 Pro Bluetooth helmets and ILM 902 Pro Bluetooth helmets.

To initiate intercom pairing, refer to the specific instructions in your helmet's detailed manual for multi-unit pairing sequences. The maximum intercom distance is up to 1000 meters (3280 feet).

Image: A group of motorcyclists on a winding road, illustrating the 6-8 rider group intercom feature with a maximum range of 3280 feet.

Image: A comparison highlighting the difference in intercom capacity between the ILM-902BT (2-3 riders) and ILM-902BT PRO (6-8 riders) models.

Image: Illustrates compatibility with the ILM 953PRO R1-Plus Bluetooth Intercom, supporting 6-8 riders over a distance of up to 1000 meters.

4. Istruzioni per l'uso

4.1 Basic Bluetooth Functions

The Bluetooth 3.0 technology allows for one-touch control of various functions:

• Telefonate: Answer, reject, or redial incoming calls. An incoming phone call takes priority over other audio functions.
• Musica: Riproduci, metti in pausa, salta le tracce.
• FM Radio: Sintonizzati sulle stazioni radio FM.
• GPS Navigation Audio: Receive voice commands from your GPS device.

The built-in speaker and noise-canceling microphones ensure clear audio communication.

Immagine: Oltreview of the helmet's Bluetooth 3.0 capabilities, including phone calls, music, intercom, GPS, and FM radio.

Image: Illustrates the ability to switch between phone calls, intercom, and music, emphasizing that incoming calls take priority.

4.2 Funzionamento della visiera

Your helmet features a dual visor system and a modular flip-up design.

• Visiera esterna: The clear outer visor can be raised or lowered as needed.
• Inner Sun Visor: A retractable inner sun visor provides protection from glare. Use the toggle switch located on the side of the helmet to deploy or retract it.
• Flip-Up Mechanism: To raise the entire front section of the helmet (chin bar and outer visor), locate the flip-up button, typically near the chin bar, and press it while lifting the section upwards.

Image: Highlights the locations of the flip-up button for the modular front and the toggle for the inner sun visor.

4.3 Sistema di ventilazione

The helmet is equipped with an air ventilation system to ensure comfortable wearing conditions and prevent visor fogging. Adjust the vents located on the helmet to control airflow.

5. Manutenzione

5.1 Cleaning the Helmet Exterior

Clean the helmet shell with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents, as these can damage the helmet's finish and protective coatings.

5.2 Cura della visiera

Clean visors with a soft, damp cloth and mild soap. Do not use harsh chemicals. Replace scratched or damaged visors immediately to maintain clear visibility.

Image: A diagram showing the process for removing and installing the helmet's outer visor for cleaning or replacement.

5.3 Removable Liners

The helmet features replaceable and washable liners for hygiene and comfort. Gently remove the liners according to the instructions in the full manual, hand wash with mild soap, and allow to air dry completely before reinstallation.

Image: Depicts the helmet's internal padding being washed, highlighting the removable and washable feature for hygiene.

6. Risoluzione Dei Problemi

6.1 Problemi di connettività Bluetooth

• Dispositivo non trovato: Ensure the helmet's Bluetooth is in pairing mode (alternating red and blue light). Check your phone's Bluetooth settings and try rescanning.
• Bluetooth Not Working After Long Storage: If the helmet hasn't been used for a long time, the battery might be in deep sleep mode. Charge the unit for at least 30 minutes to reactivate.
• Connessione intermittente: Ensure your device is within the effective range (typically up to 10 meters for phone connection). Avoid obstacles that may interfere with the signal.

6.2 Audio Quality and Volume

• Low Volume at High Speeds: While the helmet reduces wind noise, external noise at highway speeds can still affect audio clarity. Ensure your device's volume is maximized.
• Volume Control Behavior: The volume control typically cycles from minimum to maximum. After reaching maximum, the next click may return to minimum. Adjust carefully.
• Chiarezza del microfono: Ensure the microphone is positioned correctly near your mouth for optimal voice transmission during calls or intercom use.

6.3 Problemi di vestibilità del casco

• Il casco sembra troppo stretto/largo: Helmet sizing can vary. If the helmet does not fit comfortably, contact ILM customer service. They can provide fitted inner pads to adjust the fit.
• Pressure Points/Headaches: A new helmet may feel snug initially. If discomfort persists after a short break-in period, the sizing may be incorrect. Refer to the sizing chart and contact support if needed.

7. Specifiche

8. Informazioni sulla garanzia

ILM provides a warranty for its products. For specific details regarding the warranty period and coverage, please refer to the documentation included with your purchase or contact ILM customer service.

Note: Different sizes of helmets are made of the same size of outer ABS shell, and the difference is the size of inner pads. Please contact ILM customer service if you feel the helmet doesn't fit, and they will offer you the fitted size inner pads.

9. Assistenza clienti

For further assistance, technical support, or inquiries regarding your ILM Bluetooth Motorcycle Helmet, please contact ILM customer service. Refer to the contact information provided in your product packaging or visit the official ILM websito.

Puoi anche visitare il ILM Store on Amazon per maggiori informazioni sul prodotto e risorse di supporto.

10. Video di prodotto