Introduzione
This manual provides essential instructions for the safe and effective use of your Digipartspower AC Adapter. This adapter is specifically designed to provide power to compatible TECSUN FM/AM/SW radio models, including R909, R-911, R912, R-919, and DR-920. Please read this manual thoroughly before using the product and retain it for future reference.
Informazioni sulla sicurezza
AVVERTIMENTO: Per ridurre il rischio di incendi o scosse elettriche, seguire attentamente queste istruzioni:
- Non esporre l'adattatore alla pioggia o all'umidità.
- Non utilizzare l'adattatore se il cavo o la spina sono danneggiati.
- Assicurarsi che l'adattatore sia collegato a una presa di corrente con la tensione correttatage as specified on the adapter label.
- Tenere l'adattatore lontano da fonti di calore e dalla luce solare diretta.
- Non tentare di smontare o modificare l'adattatore.
- Always unplug the adapter from the power outlet when not in use or before cleaning.
- Questo adattatore è inteso solo per uso interno.
Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- 1 x Digipartspower AC Adapter
- (Note: Compatible device, such as TECSUN radio, is not included.)
Impostare
Ispezionare l'adattatore: Prima dell'uso, ispezionare visivamente l'adattatore CA e il relativo cavo per verificare la presenza di eventuali danni. Non utilizzare se danneggiati.

This image shows the Digipartspower AC Adapter, featuring its main body, the two-pin power plug, and the micro USB output connector. The adapter is designed to provide power to compatible devices.
Connettiti alla radio: Locate the power input port on your TECSUN radio (R909, R-911, R912, R-919, or DR-920). Carefully insert the micro USB connector of the AC adapter into the radio's power input port. Ensure a firm and secure connection.
Collegare alla presa di corrente: Plug the two-pin power plug of the AC adapter into a standard wall power outlet. Ensure the outlet is easily accessible and provides the correct voltage.
Accensione: Once connected, your TECSUN radio should receive power. Refer to your radio's specific manual for instructions on powering it on and confirming power reception.
Operativo
The Digipartspower AC Adapter functions as a direct power source for your compatible TECSUN radio. It is designed for continuous operation when connected to a power outlet.
- Alimentazione della radio: Once the adapter is properly connected to both the radio and a power outlet, the radio will draw power directly from the adapter.
- Addebito (se applicabile): If your TECSUN radio model supports charging via its power input, the adapter will also facilitate battery charging. Consult your radio's manual to confirm its charging capabilities.
- Disconnessione: To disconnect, first turn off your radio, then unplug the adapter from the wall outlet, and finally disconnect the micro USB connector from the radio.
Manutenzione
Una corretta manutenzione garantisce la longevità e il funzionamento sicuro dell'adattatore CA.
- Pulizia: Disconnect the adapter from the power outlet and the radio before cleaning. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or abrasive materials.
- Magazzinaggio: Quando non in uso, conservare l'adattatore in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme. Evitare di arrotolare troppo il cavo per evitare danni.
- Ispezione: Periodically inspect the cable and connectors for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately and replace the adapter.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La radio non si accende. | Adapter not properly connected; Power outlet not active; Damaged adapter. | Ensure micro USB is fully inserted into radio. Check if power outlet is working by plugging in another device. Inspect adapter for damage; if damaged, replace. |
| Alimentazione intermittente alla radio. | Loose connection; Damaged cable. | Verify all connections are secure. Inspect cable for kinks or breaks; replace if damaged. |
| L'adattatore risulta insolitamente caldo. | Sovraccarico; scarsa ventilazione; guasto interno. | Unplug immediately. Ensure adapter is not covered or in an enclosed space. If problem persists, discontinue use and replace. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Digipartspower |
| Tipo di connettore | Micro USB |
| Dispositivi compatibili | TECSUN FM/AM/SW Radio (R909, R-911, R912, R-919, DR-920) |
| Porte USB totali | 1 |
| Tipo di connettore di alimentazione principale | 2 perni |
| Tipo di montaggio | Montaggio a parete |
| Tecnologia di connettività | USB |
Garanzia e supporto
Digipartspower products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact Digipartspower customer support directly. If you encounter any issues or have questions regarding your AC adapter, please reach out to the seller or manufacturer for assistance.
Contact information for support is typically available on the product packaging or the official Digipartspower websito.