Prodotto finitoview
The Energizer Headband Light is a hands-free LED lighting solution designed for various activities. It features a comfortable, stretchy headband with an integrated light unit. The device offers two light modes and provides up to 100 lumens of illumination. It is powered by AAA batteries and is built with a shatterproof lens and non-slip grip for durability and secure wear.
Image: The Energizer Headband Light highlighting its features: 2 light modes, shatterproof lens, non-slip grip, 100 lumens on high, and 19 hours run time on low.
Image: A woman wearing the Energizer Headband Light, demonstrating its soft, stretchy comfort during an activity.
Cosa c'è nella scatola
- One (1) Energizer Headband Light
- Two (2) Energizer MAX AAA Batteries
Image: The Energizer Headband Light packaging, showing one headband headlamp and two AAA alkaline batteries included.
Impostare
1. Installazione della batteria
- Locate the battery compartment cover on the light unit. This is typically on the top surface of the light module.
- Gently open the battery compartment cover. If it is stiff, a small flat-head screwdriver may be used to carefully pry it open.
- Inserire due (2) batterie AAA nel vano, assicurandosi che i terminali positivo (+) e negativo (-) siano allineati correttamente con gli indicatori all'interno del vano.
- Chiudere saldamente il coperchio del vano batteria finché non scatta in posizione.
2. Regolazione dell'archetto
- The headband is designed to be soft and stretchy for comfort.
- Place the headband around your head so the light unit is positioned on your forehead.
- Adjust the band to achieve a snug yet comfortable fit. The band can adjust from approximately 5.5 inches to 14.25 inches in diameter.
- Ensure the light unit is stable and does not slip during movement. The non-slip grip on the inner side of the headband helps maintain position.
Istruzioni per l'uso
Accensione/spegnimento e selezione della modalità
The Energizer Headband Light features a single button for power control and mode cycling.
- Per attivare: Press the power button located on the top of the light unit once. The light will activate in its default mode (High).
- Per scorrere le modalità: While the light is on, press the power button again to switch between the available light modes (High and Low).
- Per spegnere: Press the power button a third time to turn the light off.
The High mode provides up to 100 lumens of bright light, suitable for activities requiring maximum illumination. The Low mode offers extended runtime, up to 19 hours, for tasks requiring less intense light or to conserve battery life.
Immagine: un primo piano view of the Energizer Headband Light, highlighting its slim design and the power button for operation.
Image: Visual representation of the light output, showing a brighter 'White Mode' and a softer 'Warm Mode', illustrating the different illumination options.
Image: A woman engaged in crafting, demonstrating the hands-free convenience of the Energizer Headband Light for indoor activities.
Manutenzione
Sostituzione della batteria
- When the light output diminishes significantly, it is time to replace the batteries.
- Seguire i passaggi di installazione della batteria descritti nel Impostare sezione.
- Sostituisci sempre entrambe le batterie AAA contemporaneamente con batterie nuove. Non mischiare batterie vecchie e nuove, o tipi diversi di batterie.
- Rimuovere le batterie se il dispositivo non verrà utilizzato per un periodo prolungato per evitare perdite.
Pulizia
- Pulire l'unità luminosa con un panno morbido eamp panno. Non usare detergenti abrasivi o solventi.
- The headband can be hand-washed with mild soap and water, then air-dried. Ensure the light unit is removed or protected from water during cleaning of the band.
Magazzinaggio
- Store the headband light in a cool, dry place away from direct sunlight.
- Rimuovere le batterie prima della conservazione a lungo termine.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. |
|
|
| La luce è fioca o tremolante. |
|
|
| Headband slips during use. |
|
|
Specifiche
- Numero modello: 039800139016
- Tipo di sorgente luminosa: GUIDATO
- Luminosità bianca: Fino a 100 lumen (modalità alta)
- Durata: Fino a 19 ore (modalità bassa)
- Fonte di energia: Alimentato a batteria
- Tipo di batteria: 2 batterie alcaline AAA (incluse)
- Voltage: 3 Volt
- Materiale: Plastica
- Caratteristiche speciali: Shatterproof Lens, Non-Slip Grip, Impact Resistant (up to 1 meter)
- Livello di resistenza all'acqua: Non resistente all'acqua
- Peso dell'articolo: 2.89 once
- Dimensioni articolo (L x P x A): 1.89" x 2.36" x 4.53"
- Regolazione della fascia: 5.5 inches to 14.25 inches in diameter
Informazioni importanti sulla sicurezza
- AVVERTENZA BATTERIA: Keep away from children. If swallowed, promptly see doctor; have doctor phone 800-498-8666. Do not install backwards, charge, put in fire or mix with used or other battery types – may explode or leak causing injury. Replace all batteries at the same time.
- Do not look directly into the LED light as it can cause temporary vision impairment.
- This device is not water resistant. Avoid exposure to water or moisture.
- Do not attempt to disassemble or modify the light unit. This will void any potential warranty and could cause damage or injury.
Image: Back of the product packaging, displaying important safety warnings and contact details.
Video del prodotto
Video: An official product video from Energizer demonstrating the features and use cases of the Energizer Headband Light.
Garanzia e supporto
Informazioni sulla garanzia
The manufacturer's warranty description states "Not applicable." Please refer to your point of purchase for specific return or exchange policies.
Assistenza clienti
For questions or assistance, please visit the official Energizer websito o contattare il servizio clienti. Puoi trovare maggiori informazioni su: www.energizer.com
For battery-related inquiries, you may contact the number provided in the battery warning: 800-498-8666.