Nady DW-11-LT-HM Digital Wireless Lapel & Headset Microphone System

Introduzione

This manual provides comprehensive instructions for the setup, operation, and maintenance of your Nady DW-11-LT-HM Digital Wireless Lapel & Headset Microphone System. This system delivers superior digital audio quality with ultra-low latency and reliable performance in the UHF 900MHz band. Please read this manual thoroughly before using the system to ensure optimal performance and longevity.

Informazioni sulla sicurezza

• Non esporre l'unità alla pioggia o all'umidità.
• Non aprire il casing; affidare ogni intervento di manutenzione a personale qualificato.
• Utilizzare solo l'adattatore di alimentazione specificato per il ricevitore.
• Ensure proper battery polarity when installing batteries in the transmitter.
• Tenere il sistema lontano da fonti di calore e dalla luce solare diretta.
• Evitare di far cadere o di sottoporre i componenti a forti urti.

Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• DW-11 Digital Wireless Receiver
• LT-HM Digital Wireless Bodypack Transmitter
• Microfono a bavero
• Microfono per cuffie
• Adattatore di alimentazione per ricevitore
• 2 batterie AA (per trasmettitore)
• Manuale dell'utente (questo documento)

Prodotto finitoview

DW-11 Digital Wireless Receiver

The receiver unit processes the digital audio signal from the transmitter and outputs it to your audio system. It features a front panel display and controls, along with rear panel audio outputs and power input.

Figura 1: Front Panel of DW-11 Receiver. This image displays the front of the Nady DW-11 receiver, highlighting its digital display, volume control knob, and power button. Indicators for AF (Audio Frequency) and RF (Radio Frequency) are also visible.

Figura 2: Rear Panel of DW-11 Receiver. This image shows the rear connections of the Nady DW-11 receiver, including the balanced XLR output, unbalanced 1/4" output, and the DC 12-15V power input.

LT-HM Digital Wireless Bodypack Transmitter

The bodypack transmitter is lightweight and designed for discreet wear. It connects to either the included lapel or headset microphone and transmits the audio signal wirelessly to the DW-11 receiver. It operates on two AA batteries.

• Lapel Microphone: A small, clip-on microphone suitable for interviews, presentations, and general speech.
• Microfono dell'auricolare: Worn on the head, providing a secure fit and consistent microphone placement for active performers or presenters.

Istruzioni di installazione

1. Disimballare i componenti: Rimuovere con attenzione tutti i componenti dalla confezione.
2. Posizionamento del ricevitore: Place the DW-11 receiver on a stable surface, away from other wireless devices or large metal objects that could interfere with the signal. Ensure the antenna is upright and unobstructed.
3. Connect Receiver Power: Connect the provided power adapter to the DC 12-15V input on the rear of the DW-11 receiver and plug it into an AC outlet. Do not power on the receiver yet.
4. Installare le batterie del trasmettitore: Open the battery compartment on the LT-HM bodypack transmitter. Insert two fresh AA batteries, observing the correct polarity (+/-). Close the compartment securely.
5. Collegare il microfono al trasmettitore: Plug either the lapel or headset microphone into the input jack on the LT-HM bodypack transmitter. Ensure the connection is firm.
6. Collegare il ricevitore al sistema audio:
   • For balanced connections, use an XLR cable to connect the "BAL MIC OUT" on the receiver to an XLR input on your mixer or audio interface.
   • For unbalanced connections, use a 1/4" TS cable to connect the "UNBAL LINE SUM OUT" on the receiver to a 1/4" input on your mixer or amppiù vivace.

Istruzioni per l'uso

1. Accendi il ricevitore: Press the "POWER" button on the front panel of the DW-11 receiver. The display should illuminate.
2. Accendere il trasmettitore: Press and hold the power button on the LT-HM bodypack transmitter until its indicator light illuminates.
3. Sincronizzazione di frequenza: The Nady DW-11 system operates on a fixed frequency (902-951MHz band). The receiver and transmitter are pre-set to communicate on a specific channel. Ensure both units are powered on and within range. The "RF" (Radio Frequency) indicator on the receiver should light up, indicating a successful connection.
4. Regola volume: Use the "VOL +" and "VOL -" knob on the front of the DW-11 receiver to adjust the output level. Start with a low volume and gradually increase it to a comfortable listening level on your connected audio system. The "AF" (Audio Frequency) indicator will light up when audio is being received.
5. Utilizzo del microfono:
   • Lapel Mic: Clip the lapel microphone approximately 6-8 inches below your chin, centered on your clothing.
   • Microfono auricolare: Position the headset microphone boom approximately 1-2 inches from the corner of your mouth.
6. Allineare: The system offers an extended wireless range of up to 300 feet (line of sight). Performance may vary depending on environmental conditions and obstructions.
7. Spegni: To turn off the system, first power off the transmitter, then the receiver.

Manutenzione

• Pulizia: Use a soft, dry cloth to clean the exterior of the receiver and transmitter. Do not use liquid cleaners or solvents.
• Sostituzione della batteria: Replace the AA batteries in the transmitter when the battery indicator shows low power or when audio quality degrades. Always use fresh, high-quality batteries.
• Magazzinaggio: When not in use for extended periods, remove batteries from the transmitter and store the system in a cool, dry place, away from extreme temperatures and humidity.

Risoluzione dei problemi

Specifiche

• Modello: DW-11-LT-HM
• Risposta in frequenza: Da 20 Hz a 20 kHz
• Portata wireless: Fino a 300 piedi (linea di vista)
• Durata della batteria del trasmettitore: Fino a 11 ore (con 2 batterie AA)
• Uscite ricevitore: 1/4" Unbalanced, XLR Balanced
• Frequenza operativa: 902-951MHz UHF band
• Modulazione: QPSK digitale
• Conversione audio digitale: 48kHz / 24 bit
• Peso dell'articolo: 1.94 libbre
• Dimensioni del prodotto: 14 x 14 x 3 pollici

Garanzia e supporto

For warranty information or technical support, please refer to the official Nady webo contattare il servizio clienti. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Nady Websito: www.nady.com