Philips LED Emergency Luminaire LEDR1W5 Instruction Manual

1. Prodotto finitoview

The Philips LED Emergency Luminaire LEDR1W5 is designed to provide reliable illumination during power outages. Featuring high-life LED technology and a rechargeable battery, it offers up to 90 minutes of emergency lighting. Its flexible and adjustable spotlights ensure excellent light distribution, providing high brightness cool white lighting (6,500 Kelvin) with a 2-watt consumption.

Le caratteristiche principali includono:

• Double-head emergency light design.
• Rechargeable NiCd battery providing up to 90 minutes of operation.
• LED indicator for charge status and a button for manual performance checks.
• Suitable for wall or ceiling installation.
• Operates on 120-277V with a luminous flux of 220 lumens.

2. Importanti istruzioni di sicurezza

Please read and follow all safety instructions carefully before installing or operating this product. Keep this manual for future reference.

• AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione prima dell'installazione o della manutenzione.
• L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto delle normative elettriche nazionali e locali.
• Do not use outdoors. This luminaire is designed for indoor use only.
• Garantire la fornitura voltage is compatible with the luminaire's requirements (120-277V).
• Non montare vicino a stufe a gas o elettriche.
• Do not allow power supply cords to touch hot surfaces.
• The battery is rechargeable and included. Do not attempt to replace the battery with an unapproved type.
• Operating ambient temperature range: 0°C to 40°C (32°F to 104°F).

3. Contenuto della confezione

Prima di procedere con l'installazione, verificare che tutti i componenti siano presenti e integri.

• Philips LED Emergency Luminaire LEDR1W5
• Rechargeable NiCd Battery (pre-installed or separate)
• Hardware di montaggio (viti, tasselli)
• Light Dimmer (as listed in product specifications, though its function with this emergency light is typically for testing)

4. Guida all'installazione

4.1 Opzioni di montaggio

The Philips LEDR1W5 emergency luminaire is designed for versatile installation on either walls or ceilings. Choose a location that provides optimal light coverage for emergency egress paths.

4.2 Cablaggio

Connect the luminaire to a non-switched 120-277V AC power supply. Ensure all wiring connections are secure and comply with local electrical codes. The luminaire will automatically charge its internal battery when connected to power.

4.3 Installazione della batteria (se non preinstallata)

If the battery is not pre-installed, carefully connect it to the designated battery connector inside the luminaire housing. Ensure correct polarity. After installation, allow the unit to charge for at least 24 hours before its first operational test to ensure full battery capacity.

5. Funzionamento

5.1 Funzionamento automatico

Once properly installed and connected to a continuous power supply, the Philips LEDR1W5 luminaire will automatically activate its LED lights when the main power supply is interrupted. It will provide emergency lighting for up to 90 minutes on a fully charged battery.

5.2 Test manuale

A push button is provided on the unit for manual performance checks. Press and hold this button to simulate a power outage. The LED lights should illuminate, indicating that the battery and lighting circuit are functional. Release the button to return to charging mode.

5.3 Charge Status Indicator

The luminaire features an LED indicator that displays the battery's charge status. A green light typically indicates that the battery is charging and fully charged. Refer to the specific labeling on your unit for detailed indicator meanings.

6. Manutenzione

6.1 Cura della batteria

To ensure optimal battery life and performance, it is recommended to perform a monthly 30-second test by pressing the test button. A full 90-minute discharge test should be conducted annually. If the unit fails to provide adequate light duration during a test, the battery may need replacement.

6.2 Pulizia

Clean the exterior of the luminaire periodically with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic housing. Ensure the unit is disconnected from power before cleaning.

7. Risoluzione Dei Problemi

• Problema: Luminaire does not light up during a power outage o test.
  Soluzione:
  • Check if the unit is properly connected to a continuous power supply.
  • Ensure the battery is correctly installed and fully charged (allow 24 hours for initial charge).
  • Verify the circuit breaker for the power supply is not tripped.
  • La batteria potrebbe essere giunta al termine della sua durata e richiedere la sostituzione.
• Problema: Lights are dim or do not last for 90 minutes.
  Soluzione:
  • The battery may not be fully charged. Ensure continuous power supply for at least 24 hours.
  • The battery may be aging and losing capacity. Consider battery replacement.
• Problema: Charge status indicator is not lit.
  Soluzione:
  • Controllare il collegamento dell'alimentazione.
  • Assicurarsi che la batteria sia collegata.
  • Se il problema persiste dopo aver verificato le connessioni, contattare l'assistenza clienti.

8. Specifiche tecniche

9. Garanzia e assistenza clienti

9.1 Informazioni sulla garanzia

This Philips LED Emergency Luminaire LEDR1W5 comes with a Garanzia di 3 anno, which includes the battery. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 Assistenza clienti

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Philips customer support. Refer to the Philips websito o sulla confezione del prodotto per le informazioni di contatto più aggiornate.