Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Manuale di istruzioni della luce

1. Introduzione

This manual provides detailed instructions for the safe and effective operation of your Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Light. Please read this manual thoroughly before installation and use to ensure proper function and to prevent damage to the unit or injury to personnel. Keep this manual for future reference.

2. Informazioni sulla sicurezza

• Collegare sempre l'unità a una presa di corrente dotata di messa a terra.
• Garantire la potenza voltage corrisponde al volume specificatotage per l'unità.
• Non utilizzare l'unità se il cavo di alimentazione è danneggiato.
• Evitare l'esposizione diretta degli occhi alla sorgente luminosa.
• Assicurare un'adeguata ventilazione attorno all'unità per evitare il surriscaldamento.
• Mount the unit securely using appropriate hardware and safety cables.
• Non aprire l'alloggiamento; al suo interno non sono presenti parti riparabili dall'utente. Per qualsiasi intervento di manutenzione, rivolgersi a personale qualificato.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti e in buone condizioni all'apertura della confezione:

• 1 x Areyourshop 360W RGBW 4-in-1 LED Zoom Moving Head Wash Stage Luce
• 1 x cavo di alimentazione
• Staffa di montaggio 1 x
• 1 x Manuale di istruzioni in inglese (questo documento)

Image 3.1: The moving head light unit, power cord, and mounting bracket.

4. Prodotto finitoview

The Areyourshop 360W Moving Head Light features 36 x 10W RGBW 4-in-1 LEDs, offering a wide range of color mixing and wash effects. It includes zoom functionality and multiple control modes for versatile stage applicazioni di illuminazione.

Immagine 4.1: anteriore view of the moving head light with dimensions: approximately 38cm (15 inches) tall and 20cm (8.2 inches) wide at the base.

Image 4.2: The moving head light showcasing its ability to produce various color wash effects, including white, red, green, blue, and purple.

5. Specifiche

6. Impostazione

6.1 Montaggio

1. Identify a suitable mounting location that can safely support the weight of the fixture.
2. Attach the provided mounting bracket to the fixture using the designated screws.
3. Securely fasten the fixture to a truss or other stable structure using appropriate clamps (not included) and the mounting bracket.
4. Always use a safety cable (not included) as a secondary attachment to prevent the fixture from falling in case of primary mounting failure.

6.2 Collegamento di alimentazione

Connect the provided power cord to the power input on the rear of the fixture and then to a grounded power outlet. Ensure the power supply is stable and within the specified voltage gamma.

6.3 Connessione DMX (opzionale)

Per il controllo DMX, collega un cavo DMX dall'uscita del controller DMX alla porta DMX IN dell'apparecchio. Se si collegano più apparecchi, collega l'uscita DMX del primo apparecchio all'ingresso DMX del successivo e così via. Termina l'ultimo apparecchio della catena con un terminatore DMX.

7. Modalità operative

The fixture can be operated in several modes, selectable via the LCD display and control buttons on the base of the unit.

7.1 Modalità DMX512

This mode allows for professional control over all functions using a DMX controller. Set the DMX address for each fixture using the LCD display. Refer to the DMX channel chart (typically provided in a separate DMX manual or appendix) for specific channel assignments and functions.

7.2 Modalità automatica

In Auto mode, the fixture runs through pre-programmed light shows automatically. Use the control buttons to select different auto programs or adjust speed settings.

7.3 Modalità attivata dal suono

The fixture's built-in microphone detects sound and synchronizes light patterns to the beat of the music. Sensitivity can often be adjusted via the menu.

7.4 Modalità Master-Slave

Link multiple fixtures together without a DMX controller. Set one fixture as the 'Master' and the others as 'Slave'. The slave units will mimic the master's movements and effects. Connect DMX OUT of the master to DMX IN of the first slave, and continue the chain.

8. Manutenzione

8.1 Pulizia

Regularly clean the lens and exterior housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.

8.2 Manutenzione della ventola

The unit is equipped with an automatic cooling fan. Periodically check the fan vents for dust accumulation and clean as necessary to ensure efficient heat dissipation and prolong the lifespan of the LEDs.

9. Risoluzione Dei Problemi

• Nessun potere: Check power cord connection, wall outlet, and ensure the power switch is on.
• Nessuna emissione luminosa: Verify power, check selected operating mode, and ensure no DMX signal issues if in DMX mode.
• Comportamento irregolare: If using DMX, check DMX cable connections, DMX address settings, and ensure the last fixture has a terminator. Try resetting the unit by power cycling.
• Surriscaldamento: Ensure adequate ventilation around the unit. Clean fan vents if obstructed by dust.

10. Garanzia e supporto

For warranty information or technical support, please contact Areyourshop customer service through your purchase platform or the official Areyourshop websito. Conserva la ricevuta d'acquisto come prova d'acquisto.