LEDVANCE Linear LED Shelf Light 400mm

1. Introduzione

This manual provides essential instructions for the safe installation, operation, and maintenance of your LEDVANCE Linear LED Shelf Light. This versatile lighting solution is designed for various indoor applications, including kitchens, workspaces, and bathrooms (IP44 rated areas). It features a sleek design, uniform light distribution, and a long operational lifespan.

Si prega di leggere attentamente il presente manuale prima dell'installazione e di conservarlo per riferimento futuro.

2. Istruzioni di sicurezza

• Sicurezza elettrica: Installation must be performed by a qualified electrician or competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or repair.
• Uso previsto: This product is designed for indoor lighting only. Do not use it in outdoor environments or areas not specified in the product description.
• Grado di protezione IP44: The IP44 rating indicates protection against solid objects larger than 1mm and splashing water from any direction. This makes it suitable for use in bathrooms (Zone 2 and 3) and kitchens, but it is not submersible.
• Sorgente luminosa: This product contains a non-replaceable LED light source of energy efficiency class E. Do not attempt to replace the LED module yourself.
• Gestione: Avoid direct contact with the light source when the fixture is powered on, as it may be hot. Do not cover the fixture with insulating material.
• Pulizia: Only clean the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• 1 x LEDVANCE Linear LED Shelf Light (400mm)
• Complete mounting accessories (screws, wall plugs)
• Accessori di collegamento

4. Specifiche

Nota: le specifiche sono soggette a modifiche senza preavviso.

5. Configurazione e installazione

The LEDVANCE Linear LED Shelf Light is designed for easy and quick wall mounting. Follow these steps carefully:

1. Preparare l'area di installazione: Choose a suitable location for mounting, ensuring it is a dry, stable surface. For bathroom installations, ensure compliance with local wiring regulations for IP44 rated fixtures.
2. Scollegare l'alimentazione: Before starting any electrical work, turn off the power supply at the main circuit breaker to prevent electric shock.
3. Segnare i punti di foratura: Hold the fixture against the wall at the desired mounting position. Use a pencil to mark the locations for drilling holes for the mounting brackets. Refer to the product dimensions for accurate placement.

4. Fori di perforazione: Praticare i fori nei punti contrassegnati utilizzando una punta da trapano adatta al materiale della parete. Inserire i tasselli forniti nei fori.
5. Fissare le staffe di montaggio: Fissare le staffe di montaggio alla parete utilizzando le viti fornite. Assicurarsi che siano saldamente fissate.
6. Collegamento elettrico: Connect the fixture's electrical wires to your household wiring. Follow the wiring diagram provided with the product. Ensure all connections are secure and insulated. This fixture is designed for AC power.
7. Montare l'apparecchio: Carefully attach the LED shelf light to the installed mounting brackets. Ensure it clicks securely into place.
8. Ripristina alimentazione: Once the fixture is securely mounted and wired, restore power at the main circuit breaker.

6. Istruzioni per l'uso

This LED shelf light is equipped with an integrated PIR motion detector and a daylight sensor for automatic operation.

• Funzionamento automatico: The light will automatically turn on when motion is detected within its range and ambient light levels are below a certain threshold (daylight sensor).
• Spegnimento automatico: The light will automatically turn off after a period of no motion detection, or when sufficient ambient light is present.
• Posizionamento del sensore: Ensure the motion sensor is not obstructed to allow for optimal detection. Avoid placing the fixture near heat sources or in direct sunlight, which could interfere with sensor performance.

7. Manutenzione

The LEDVANCE Linear LED Shelf Light requires minimal maintenance.

• Pulizia: To clean the fixture, ensure the power is off. Wipe the surface with a soft, dry, or slightly damp panno. Non utilizzare prodotti chimici aggressivi, detergenti abrasivi o spray direttamente sull'apparecchio.
• Ispezione: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power immediately and consult a qualified technician.
• Sorgente luminosa: La sorgente luminosa a LED è integrata e non sostituibile dall'utente. In caso di guasto della sorgente luminosa, è necessario sostituire l'intero apparecchio.

8. Risoluzione Dei Problemi

If you encounter issues with your LEDVANCE Linear LED Shelf Light, refer to the following common problems and solutions:

• La luce non si accende:
  • Controllare che l'alimentazione sia collegata e che l'interruttore automatico sia acceso.
  • Ensure the wiring connections are secure.
  • Verify that the ambient light is low enough for the daylight sensor to activate the light.
  • Check if motion is being detected by the PIR sensor.
• La luce rimane accesa ininterrottamente:
  • Assicurarsi che non vi sia alcun movimento continuo all'interno del raggio di rilevamento del sensore.
  • Check if the daylight sensor is being obstructed or if it's in a consistently dark area.
• Light Flashes or Flickers:
  • Disconnect power and check all electrical connections for looseness or damage.
  • Assicurare il volumetage supply is stable and within the specified range (240V).

Se questi passaggi non risolvono il problema, contattare l'assistenza clienti.

9. Garanzia e supporto

This LEDVANCE Linear LED Shelf Light comes with a Garanzia di 2 anni dalla data di acquisto, coprendo i difetti di materiali e di fabbricazione in condizioni di normale utilizzo.

For warranty claims, technical support, or further assistance, please contact LEDVANCE customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and product model number ready.