COMICA VDLive 10 USB C Wireless Lavalier Microphone System User Manual

1. Introduzione

The COMICA VDLive 10 USB C Wireless Lavalier Microphone System is designed for high-quality audio recording with USB-C compatible devices. This versatile system includes a charging case, dual transmitters, and a receiver, offering flexible output modes for various applications such as video recording, live streaming, online conferencing, and vlogging. Its compact design and advanced features ensure clear and stable audio performance.

2. Cosa c'è nella scatola

Si prega di controllare il contenuto della confezione per assicurarsi che siano presenti tutti gli articoli:

• 1 x VDLive 10 USB-RX Receiver
• 2 x VDLive 10 TX Transmitters
• 1 x Custodia di ricarica
• 2 x Wind Muffs (Dead Cats)
• 1 x 3.5mm TRS-TRS Audio Cable
• 1 x adattatore da USB-C a USB-A
• 1 x adattatore per slitta a contatto freddo
• Cavo di ricarica 1 x USB-C
• 1 x custodia per il trasporto
• 1 x Manuale utente

3. Prodotto finitoview

3.1. Receiver (VDLive 10 USB-RX)

• Connettore USB-C: Directly plugs into smartphones, tablets, or computers.
• 3.5mm Output/Monitor Jack: For connecting to cameras or monitoring audio with headphones.
• Visualizzazione IPS: Shows battery levels, audio levels, mode (Mono/Stereo), and connection status.
• Interruttore On/Off: Accende o spegne il ricevitore.
• Interruttore mono/stereo: Alterna tra le modalità di uscita mono e stereo.
• Pulsante di reset: Per ripristinare il sistema, se necessario.

3.2. Transmitter (VDLive 10 TX)

• Microfono incorporato: Omnidirectional microphone for capturing audio.
• 3.5mm MIC Input: Per collegare un microfono lavalier esterno.
• Volume/Mute Button: Adjusts microphone gain (4 levels) and mutes/unmutes the microphone.
• On/Off/Simplex/Duplex Switch: Powers the transmitter on/off and selects transmission mode.
• Clip da cintura: Per un facile fissaggio agli indumenti.

3.3. Custodia di ricarica

• Ricarica integrata: Charges both transmitters and the receiver simultaneously.
• Indicatore di alimentazione: LED lights show the charging case's battery level.
• Pulsante di coppia: Initiates pairing process for devices.
• Porta di ricarica USB-C: Per ricaricare la custodia stessa.

4. Configurazione e connessione

4.1. Initial Setup & Pairing

1. Fully charge the charging case, transmitters, and receiver before first use.
2. Open the charging case. The devices will automatically power on and attempt to pair.
3. If pairing does not occur automatically, press the "Pair" button on the charging case. The indicators on the devices will flash during pairing and become solid when connected.

4.2. Connecting to a Smartphone/Tablet (USB-C)

1. Assicurarsi che il ricevitore sia acceso.
2. Directly plug the USB-C connector of the receiver into your smartphone or tablet's USB-C port.
3. The device should automatically recognize the microphone system.
4. Open your preferred video recording or live streaming application.

4.3. Connecting to a Camera (3.5mm Analog)

1. Attach the cold shoe adapter to your camera's hot shoe mount.
2. Slide the receiver onto the cold shoe adapter.
3. Connect the 3.5mm TRS-TRS audio cable from the receiver's 3.5mm output jack to your camera's microphone input.
4. Ensure your camera's audio input settings are configured to use the external microphone.

4.4. Connecting to a Computer (USB-A)

1. Plug the USB-C to USB-A adapter into the receiver's USB-C connector.
2. Plug the adapter into your computer's USB-A port.
3. Select "Comica_VDLive10" as the input and output audio device in your computer's sound settings or conferencing software (e.g., Zoom, Skype).

5. Istruzioni per l'uso

5.1. Transmitter Mode Selection (Simplex/Duplex)

• Use the S/D switch on the side of the transmitter to select the desired mode:
  • S (Simplex): One-way audio transmission from the transmitter to the receiver. Ideal for standard recording.
  • D (Duplex): Two-way audio transmission, allowing the user to monitor audio from the receiver (e.g., device audio) through headphones connected to the transmitter's 3.5mm jack.

5.2. Receiver Output Mode (Mono/Stereo)

• On the receiver, use the M/S button to switch between Mono and Stereo output:
  • Mono: Combines audio from both transmitters into a single channel.
  • Stereo: Separates audio from each transmitter into left and right channels, allowing for individual post-production control.

5.3. Volume Adjustment & Mute

• On each transmitter, press the "VOL/MUTE" button to cycle through 4 volume gain levels.
• Press and hold the "VOL/MUTE" button to mute or unmute the specific transmitter. The receiver's display will indicate the mute status.

6. Ricarica

• Dispositivi di ricarica: Place the transmitters and receiver into the charging case. They will automatically begin charging.
• Custodia di ricarica: Connect the USB-C charging cable to the charging case's USB-C port and a power source. The power indicator LEDs on the case will show the charging status.
• The charging case can provide approximately 3 full charges for both transmitters and the receiver.
• Transmitters and receiver offer up to 4 hours of operation on a full charge. The charging case provides up to 12 hours of additional power.

7. Caratteristiche principali

• Trasmissione senza fili 2.4G: Stable and reliable audio transmission up to 164 feet (50 meters).
• Riduzione intelligente del rumore: Enhances audio clarity by minimizing background noise.
• Visualizzazione IPS: Provides clear, real-time monitoring of audio levels, battery status, and operating modes.
• Bassa latenza: Sub-20ms latency ensures synchronized audio and video.
• High-Density Wind Muff: Included for effective wind noise reduction in outdoor environments.

8. Specifiche

9. Risoluzione Dei Problemi

• Nessuna uscita audio:
  • Ensure all devices (transmitters, receiver, recording device) are powered on.
  • Controllare i livelli della batteria di tutti i componenti.
  • Verify proper cable connections (USB-C or 3.5mm TRS).
  • Confirm the receiver is correctly paired with the transmitters.
  • Check your recording device's audio input settings to ensure the VDLive 10 is selected.
  • Ensure transmitters are not muted.
• Scarsa qualità audio/rumore:
  • Ensure transmitters are within the 164ft (50m) operating range.
  • Avoid physical obstructions or strong electromagnetic interference.
  • Use the included wind muffs in windy outdoor conditions.
  • Adjust the volume gain levels on the transmitters to prevent clipping or low signal.
  • Ensure the transmitter is securely clipped and not rubbing against clothing.
• Problemi di accoppiamento:
  • Place transmitters and receiver back into the charging case and press the "Pair" button on the case.
  • Assicurarsi che tutti i dispositivi siano completamente carichi.
  • If issues persist, try resetting the system using the reset button on the charging case.

10. Garanzia e supporto

COMICA products typically come with a manufacturer's warranty. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official COMICA website. You can also contact COMICA customer service directly for assistance.

COMICA Official Store: Visit the COMICA Store on Amazon