1. Introduzione
The Peak Elara Pen is a professional-grade permanent makeup machine designed for precision and versatility. Its lightweight and ergonomic design provides pen-like control, making it suitable for a wide range of permanent makeup procedures, including microblading, lip blush, and color correction. This manual provides essential information for the safe and effective use of your Elara Pen.
2. Informazioni sulla sicurezza
- Always ensure the machine is disconnected from the power source before cleaning or performing maintenance.
- Use only compatible, sterile cartridge needles.
- Non immergere la macchina in liquidi.
- Tenere la macchina fuori dalla portata dei bambini.
- This device is intended for professional use by trained and certified permanent makeup artists only.
- Inspect the RCA cable for any damage before each use. Do not use if damaged.
3. Prodotto finitoview
The Peak Elara Pen features a durable body, a detachable textured grip, and an internal drive system. It is designed for use with standard cartridge needles.
Figure 1: Peak Elara Pen Permanent Makeup Machine with a needle cartridge inserted, showcasing its sleek rose gold design.
Figure 2: The Peak Elara Pen with its textured grip detached, revealing the connection point for the grip and the RCA port at the rear.
Figure 3: The Peak Elara Pen disassembled, showing the main body, the detachable grip, and the internal drive bar, illustrating its modular design.
4. Impostazione
Follow these steps to set up your Peak Elara Pen for operation:
- Connetti alimentazione: Plug the included RCA cable into the machine's RCA port and connect the other end to a compatible power supply.
- Inserire l'ago della cartuccia: Securely insert a compatible cartridge needle into the front of the machine.
- Regolare la profondità dell'ago: Rotate the grip clockwise to decrease needle depth or counter-clockwise to increase it.
- Adjust Stroke Length (Optional): The machine comes with a 3mm cam installed. To change the stroke length, detach the grip and replace the cam with either the 2.5mm or 3.5mm cam using the provided allen key.
Figure 4: Visual guide for initial setup, demonstrating power connection, needle insertion, and needle depth adjustment.
5. Istruzioni per l'uso
Once set up, operate your Elara Pen as follows:
- Accensione: Turn on your power supply and set the desired voltage.
- Voltage Gamma: The Elara Pen supports a broad voltage range. A midrange voltage of 7V is optimal for most procedures. Lower voltages (5–6V) are suitable for stippling and pixel shading, while higher voltages (8V) are recommended for lip blushing and color correction.
- Procedura: Begin your permanent makeup procedure, maintaining proper technique and hygiene.
- Spegni: After use, turn off the power supply and disconnect the machine.
6. Manutenzione
Proper maintenance ensures the longevity and performance of your Elara Pen:
- Pulizia: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Ensure no liquids enter the internal components.
- Sterilizzazione: The machine itself is not autoclavable. Only the needle cartridges are sterile and disposable.
- Magazzinaggio: Conservare la macchina in un luogo pulito e asciutto, lontano dalla luce solare diretta e da temperature estreme.
- Ispezione: Regularly inspect the machine for any signs of wear or damage, especially the RCA port and grip connection.
7. Risoluzione Dei Problemi
If you encounter issues with your Elara Pen, refer to the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La macchina non si accende | Loose RCA connection, faulty power supply, damaged cable. | Check all connections. Test with a different RCA cable or power supply if available. |
| Needle not moving or weak operation | Vol non correttotage setting, needle cartridge issue, drive bar obstruction. | Regola il volumetage. Replace needle cartridge. Ensure drive bar moves freely. |
| Vibrazione o rumore eccessivi | Loose components, worn O-rings, incorrect assembly. | Ensure grip is securely attached. Check O-rings for wear and replace if necessary (2 O-rings included). Reassemble carefully. |
8. Specifiche
- Marca: Picco
- Modello: Elara Pen
- Lunghezze del tratto: 2.5mm, 3mm (pre-installed), 3.5mm (interchangeable cams included)
- Profondità dell'ago: Adjustable by rotating grip
- Voltage Gamma: Broad, suitable for various procedures (e.g., 5-6V for stippling, 8V for lip blush)
- Compatibilità: Most standard cartridge needles
- Connessione: RCA
- Accessori inclusi: RCA cable, 2 O-rings, spring, allen key, drive bar
- ASIN: B09G3ZKXW4
- Codice UPC: 850011407547
9. Garanzia e supporto
For detailed warranty information and customer support, please refer to the official Peak website or contact your authorized distributor. Keep your proof of purchase for any warranty claims.
Ufficiale Websito: Visit the Peak Store on Amazon