1. Introduzione
This manual provides essential instructions for the setup, operation, and maintenance of your OBEST Tbleague 1/6 Scale Super Flexible Seamless Female Action Figure, model PHMB2019-S34. Please read this guide thoroughly to ensure proper handling and to maximize the lifespan of your figure.
2. Contenuto della confezione
Verifica che tutti i componenti elencati di seguito siano presenti nel tuo pacchetto:
- 1x OBEST Tbleague 1/6 Scale Super Flexible Seamless Female Action Figure (PHMB2019-S34)
- 1x Head Sculpt
- 3x Pairs of Interchangeable Hands
- 1x Base & Holder
- 1x Bikini Set
Image 2.1: The figure is shown with its included accessories, including the head sculpt, three pairs of interchangeable hands, and a display stand.
3. Caratteristiche del prodotto
- High Elastic Material: Constructed from high-quality, non-toxic silicone, providing a realistic skin feel that is soft, smooth, and elastic.
- Exquisite 1/6 Scale: The figure stands approximately 12 inches (30 cm) tall, featuring narrow shoulders, long legs, and a slim waist. Note: The feet are not removable.
- Elevata flessibilità: Incorporates a stainless steel skeleton with 28 pivot points, allowing for a wide range of poses, including complex movements.
- Customizable Model: Designed as a realistic female figure, including a head sculpt and bikini. The figure can be dressed and customized with various outfits and accessories (sold separately).
Image 3.1: The OBEST Tbleague 1/6 Scale Action Figure showcasing its flexible design and realistic appearance.
Image 3.2: Size comparison of the action figure next to a soda can, illustrating its 1/6 scale.
4. Impostazione
Follow these steps to prepare your action figure for display or posing:
- Disimballare i componenti: Estrarre con cautela tutti gli articoli dall'imballaggio.
- Attach Head Sculpt: Gently align the neck joint of the head sculpt with the neck peg on the figure's body. Apply light, even pressure to secure it. Do not force the connection.
- Interchange Hands: To change hands, gently pull the existing hand from the wrist joint. Select the desired pair of hands and carefully push them onto the wrist joint until secure.
- Use the Base & Holder: Insert the support rod of the holder into the base. Position the figure on the holder by placing the clamp around the figure's waist or leg for stable display.
Immagine 4.1: Dettagliata view of the figure's head, showing the attachment point for the head sculpt.
5. Operating (Posing)
The figure's stainless steel skeleton allows for extensive articulation. Exercise caution when posing to avoid damage.
- Manipolazione delicata: When bending joints, apply slow and steady pressure. Avoid sudden or forceful movements, especially at extreme angles.
- Explore Range of Motion: The 28 pivot points offer a wide range of motion. Experiment with different poses, but be mindful of the natural limits of human anatomy to prevent overextension.
- Support for Complex Poses: For dynamic or unsupported poses, utilize the included base and holder to maintain stability and prevent the figure from falling.
Image 5.1: The figure demonstrating a standing pose, highlighting its articulation.
6. Manutenzione
Proper care will preserve the quality and appearance of your figure.
- Pulizia: Use a soft, dry cloth to gently wipe away dust. For stubborn marks, lightly dampen the cloth with water and mild soap, then wipe clean and dry immediately. Avoid harsh chemicals or abrasive materials.
- Magazzinaggio: Store the figure away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation and discoloration.
- Avoid Staining: Be cautious when placing the figure in contact with dark-colored fabrics or materials for extended periods, as this may cause staining on the silicone body.
7. Risoluzione Dei Problemi
Fare riferimento ai seguenti problemi comuni e alle relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Joint feels stiff or stuck. | Dust accumulation or initial stiffness. | Gently manipulate the joint. If necessary, apply a very small amount of silicone lubricant (not oil-based) to the joint area. |
| La figura non è stabile. | Improper balance or stand not used. | Adjust the figure's pose for better balance. Always use the included base and holder for stable display, especially for dynamic poses. |
| Discoloration or staining on the body. | Contact with dark or dyed materials. | Attempt to clean with mild soap and water. Prevent future staining by avoiding prolonged contact with non-colorfast materials. |
8. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | PHMB2019-S34 |
| Dimensioni del prodotto | 2.76 x 10.63 x 34 pollici (dimensioni approssimative della confezione) |
| Peso dell'articolo | 1.21 libbre |
| Scala | Scala 1/6 |
| Materiale | High-quality, non-toxic silicone with stainless steel skeleton |
| Punti di articolazione | 28 |
| Età consigliata | 15 months and up (Note: This is a collector's item, not a child's toy.) |
9. Supporto
For any questions or assistance regarding your OBEST Tbleague action figure, please contact our customer service. We are committed to providing 100% satisfactory service.
Le informazioni di contatto si trovano solitamente sulla confezione del prodotto o sul sito del rivenditore websito in cui è stato acquistato il prodotto.