Solid Signal HYPERD/ST/DCHP
Blackmagic Design HyperDeck Studio HD Plus Recorder User Manual
Model: HYPERD/ST/DCHP | Brand: Solid Signal (Bundle)
Comprehensive guide for setup, operation, and maintenance of your HyperDeck Studio HD Plus.
Introduzione
The Blackmagic Design HyperDeck Studio HD Plus is a professional broadcast deck designed for recording and playback of video. It includes advanced features such as 6G-SDI connectivity, allowing for recording and playback of ProRes up to Ultra HD 30 frames per second. This model also supports HDR (High Dynamic Range) and includes an SDI loop out. Its dual 6G-SDI outputs enable fill and key playback up to 1080p60. For monitoring, it provides an HDMI input and a dedicated 3G-SDI monitoring output with overlays. The unit features an upgraded front panel with improved transport control buttons, a headphone socket, and a built-in speaker. All front panel button presses are sent to a dedicated RS-422 remote output, and the DC power input is a broadcast-style XLR connector.
Image: The Blackmagic Design HyperDeck Studio HD Plus Recorder, shown with the included 6 ft power cord and a 5-pack of Solid Signal cable ties.
Cosa è incluso
Il tuo pacco dovrebbe contenere i seguenti articoli:
- Blackmagic Design HyperDeck Studio HD Plus Recorder
- Cavo di alimentazione da 6 piedi
- 5-Pack Solid Signal Cable Ties
Image: The included 6 ft power cord and the 5-pack of Solid Signal cable ties.
Guida all'installazione
Follow these steps to set up your HyperDeck Studio HD Plus Recorder:
- Collegamento elettrico: Connect the included 6 ft power cord to the broadcast-style XLR connector on the rear of the HyperDeck Studio HD Plus. Plug the other end into a suitable power outlet.
Image: Rear panel of the HyperDeck Studio HD Plus, highlighting the power input and various video/audio connections.
- Ingresso video: Connect your video source to the HyperDeck using either the 6G-SDI input (BNC) or the HDMI 2.0 Type A input. This model supports ProRes recording up to Ultra HD 30fps via 6G-SDI.
Note: Ensure your source device is compatible with the HyperDeck's supported video standards.
- Video Output (Monitoring): For monitoring, connect a display to the dedicated 3G-SDI monitoring output (BNC) or the HDMI Type A 2.0 output. This output can display overlays.
- Magazzinaggio: Insert an SD card or connect an external disk via the USB Type-C port for recording. The unit supports recording of SD, HD, and 2K DCI formats.
- Timecode & Reference: If synchronizing with other equipment, connect timecode and reference signals to the respective BNC inputs/outputs.
- Connessione di rete (facoltativa): Connect an Ethernet cable for network control or file transfer, if supported by your workflow.
Istruzioni per l'uso
The HyperDeck Studio HD Plus features an intuitive front panel for easy operation.
Image: Front panel of the HyperDeck Studio HD Plus, displaying the transport controls, LCD screen, and input/menu buttons.
Controlli del pannello frontale:
- Pulsanti di trasporto: Utilizzare il RICORDA (rosso), GIOCARE (verde), FERMARE (blu), RIVISTA, Avanti Avanti, E SALTARE pulsanti per il controllo dei media.
- Schermo LCD: Visualizza il video preview, timecode, recording status, and menu options.
- Pulsante di ingresso: Selects the active video input source.
- Pulsante Menu: Accesses system settings and configuration options.
- Search Knob: Navigates through media and menu options.
- Presa per cuffie: Per il monitoraggio audio.
- Altoparlante incorporato: Provides basic audio monitoring.
Registrazione:
- Ensure a formatted storage medium (SD card or external disk) is inserted/connected.
- Selezionare la sorgente di ingresso desiderata utilizzando il INGRESSO pulsante.
- Premere il tasto RICORDA per iniziare la registrazione. L'indicatore REC si illuminerà.
- Premere il tasto FERMARE pulsante per terminare la registrazione.
Riproduzione:
- Utilizzare il RICERCA knob to navigate to the desired clip.
- Premere il tasto GIOCARE pulsante per avviare la riproduzione.
- Utilizzo RIVISTA, Avanti Avanti, E SALTARE pulsanti per la navigazione.
- Premere il tasto FERMARE per interrompere la riproduzione.
USB Webcam Feature:
The USB Type-C port allows the HyperDeck Studio HD Plus to function as a webcam. Connect the unit to your computer via USB-C, and it will be recognized as a video input device. This feature is compatible with video conferencing software like Zoom, Microsoft Teams, and Skype, as well as live streaming applications such as Open Broadcaster and XSplit Broadcaster.
Manutenzione
- Pulizia: Utilizzare un panno morbido e asciutto per pulire l'esterno dell'unità. Evitare detergenti abrasivi o solventi.
- Ventilazione: Assicurarsi che le griglie di ventilazione siano libere da ostruzioni per evitare il surriscaldamento.
- Aggiornamenti del firmware: Periodically check the Blackmagic Design websito per gli aggiornamenti del firmware per garantire prestazioni ottimali e accesso a nuove funzionalità.
- Magazzinaggio: Quando non in uso, conservare l'unità in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun potere | Cavo di alimentazione non collegato; problema con la presa di corrente. | Ensure power cord is securely connected to the unit and a working power outlet. |
| No Video Input Detected | Incorrect input selected; Cable issue; Source device not outputting signal. | Verify correct input is selected on the HyperDeck. Check video cables and ensure source device is powered on and outputting video. |
| Registrazione fallita | Storage full; Incorrect media format; Media speed too slow. | Check available storage space. Ensure media is formatted correctly (e.g., ExFAT). Use recommended high-speed media for recording high-resolution formats. |
| Nessun audio | Audio not embedded in video signal; Volume too low. | Verify audio is present in the input video signal. Adjust volume on monitoring device or HyperDeck. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | HYPERD/ST/DCHP |
| Marca | Blackmagic Design (via Solid Signal) |
| Ingressi video | 1 x BNC, 6G-SDI; 1 x HDMI 2.0 Type A |
| Uscite video | 1 x BNC, 6G-SDI Loop-Out; 2 x BNC, 6G-SDI; 1 x HDMI Type A, 2.0; 1 x BNC, 3G-SDI (Monitor Out) |
| Altre porte | 1 x USB Type-C (Webcam or External Recording); Timecode In/Out (BNC); Reference In (BNC); Ethernet; Remote In/Out (RS-422) |
| Formati di registrazione supportati | ProRes up to Ultra HD 30fps (via 6G-SDI); SD, HD, 2K DCI |
| Supporto HDR | SÌ |
| Dimensioni | 16"L x 12"W x 4"H (circa) |
| Peso dell'articolo | 4.33 libbre (circa) |
Informazioni sulla garanzia
For detailed warranty information regarding your Blackmagic Design HyperDeck Studio HD Plus Recorder, please refer to the official documentation provided by Blackmagic Design or visit their official websito. I termini di garanzia coprono in genere i difetti di fabbricazione per un periodo di tempo specificato a partire dalla data di acquisto.
Note: This product is bundled by Solid Signal. Any specific warranty claims related to the bundle components (power cord, cable ties) should be directed to Solid Signal.
Supporto
For technical support, driver downloads, and the latest firmware updates for your Blackmagic Design HyperDeck Studio HD Plus, please visit the official Blackmagic Design support page:
For inquiries related to the Solid Signal bundle components or purchase, please contact Solid Signal customer service.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.