PQWT L3000 Water Leak Detector Instruction Manual

1. Introduzione

The PQWT L3000 is a multi-functional water leak detector designed for both indoor and outdoor pipeline leakage detection. It utilizes advanced acoustic sensor technology and noise reduction features to accurately pinpoint water leaks in various environments, including outdoor water pipes, fire pipes, heating systems, indoor water pipes, and underground heating floor pipes. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device.

Image: PQWT L Series Outdoor Water Leak Detector in an outdoor setting, highlighting its features like LCD screen, UI, and detection depth.

2. Componenti del prodotto

The PQWT L3000 Water Leak Detector kit includes the following main components:

• Macchina ospite: The main unit with a smart touchscreen for control and data display.
• Noise Reduction Headphone: For clear audio detection of leak sounds.
• Sensori: Various sensors are included to adapt to different detection scenarios. For the PQWT-L3000, this includes a Horizontal Sensor and a Middle Sensor.
• Palo Telescopico: For connecting sensors and extending reach.
• Sound Pole: For inserting sensors into soft soil or lawns.
• Cinghia: For carrying the host machine.
• Charger & USB Data Cable: Per la ricarica e il trasferimento dei dati.
• Adattatore universale: Per la ricarica.

Immagine: Oltreview of the PQWT L3000 kit components, including the host machine, headphone, various sensors, telescopic pole, listening rod, USB cable, charger, and universal adapter.

Image: Diagram illustrating different sensor types and their applications, including Horizontal, Vertical, Middle, Large, Listening, and Gas sensors, adapting to various detection depths and environments.

Image: Table comparing different PQWT L series models (L30, L40, L50, L2000, L3000, L4000, L5000, L6000, L7000, L9000) based on measuring area and sensor configuration.

3. Impostazione

Follow these steps to assemble your PQWT L3000 Water Leak Detector:

1. Collegare il cinturino: Attach the strap to the host machine.
2. Collegare il sensore: Connect the appropriate sensor (Horizontal or Middle for L3000) to the telescopic pole.
3. Connect the Headphone: Plug the noise reduction headphone into the host machine.
4. Accensione: Long press and hold the "Switch Button" to boot and enter the main interface.

Image: Visual guide showing the four assembly steps: connecting the strap, connecting the sensor cable, connecting the earphone, and powering on the device.

4. Istruzioni per l'uso

The PQWT L3000 offers two primary detection modes: General Detection and Locating Mode.

4.1. General Detection (Outdoor)

General Detection is primarily used for checking large outdoor pipeline areas for water leakage.

1. Enter Outdoor Mode: On the host machine, click to enter the "Outdoor" mode.
2. Select Soil/Pipe Type: Select the soil texture (e.g., "Hard") and pipe material (e.g., "Metal") according to your detecting environment.
3. Start General Detection: Click "General Detection" to enter the interface.
4. Sensore di posizione: Place the sensor above the suspected pipe area.
5. Receive Sound: Turn on the knob switch to receive sound through the headphones.
6. Observe Spectrum: Listen to the volume and observe the spectrum change on the screen. Move the sensor forward, detecting points in the same way.
7. Identify Leakage Area: When the spectrum on the instrument screen is high and the sound in the headset is significantly increased, the area can be identified as a suspected leakage area and marked.

4.2. Locating Mode (Outdoor)

Locating Mode is used to pinpoint leak points within suspected leakage areas.

1. Enter Locating Mode: On the host machine, click to enter the "Locating" mode.
2. Rilevamento avvio: In the suspected leakage area, start detection from the first point.
3. Click Spectrum Bar: Click any position in the spectrum bar. The signal value will be displayed on the top of the spectrum bar. The thin bar represents ambient noise, while the thick bar represents underground sound.
4. Lock Stable Signal: After the thick bar is stable, click again any position in the spectrum bar to lock it. The signal value changes from red to black, indicating the detection at that point is completed.
5. Compare Points: Use the same method to compare different points in this area. The detection point with the highest thick spectrum bar and the largest signal value is the suspected leaking point.
6. Esporta dati: Detection reports in locating mode can be stored after clicking the "Export" button and connecting to a computer.

4.3. General Detection (Indoor)

General Detection is used for checking large indoor pipeline areas for water leakage.

1. Enter Indoor Mode: On the host machine, click the "Indoor" icon, then choose "General Detection".
2. Receive Sound: Turn on the knob switch to receive sound through the headphones.
3. Observe Spectrum: Listen to the volume and observe the spectrum change on the screen. Move the sensor forward, detecting points in the same way.
4. Identify Leakage Area: When the spectrum on the instrument screen is high and the sound in the headset is significantly increased, the area can be identified as a suspected leakage area and marked.

4.4. Locating Mode (Indoor)

Locating Mode is used to pinpoint leak points within suspected indoor leakage areas.

1. Enter Locating Mode: On the host machine, click to enter the "Locating" mode.
2. Rilevamento avvio: In the suspected leakage area, click any position in the spectrum bar.
3. Lock Stable Signal: After the thick bar is stable, click again any position in the spectrum bar to lock it. The detection point with the highest thick spectrum bar and the largest signal value is the suspected leaking point.

5. Manutenzione

• It is forbidden to put the sensor into the water. Please handle the sensor gently.
• It is forbidden to use the device in flammable and explosive areas such as gasoline and natural gas.
• If the instrument is not used for a long time, please charge it once a month at least to maintain battery health.
• When detecting in areas with soft soil or a lawn, it is recommended to use the sensor connected to the sound pole and insert it into the soil for optimal results.

6. Risoluzione Dei Problemi

While no specific troubleshooting section is provided, ensure the following if you encounter issues:

• Controllare le connessioni: Verify all sensors, headphones, and cables are securely connected to the host machine.
• Livello della batteria: Assicurarsi che il dispositivo sia adeguatamente carico.
• Parametri ambientali: Confirm that the correct soil texture and pipe material are selected in the settings for accurate detection.
• Posizionamento del sensore: For soft ground, ensure the sound pole is properly inserted.
• Interferenza di rumore: Utilize the noise reduction headphones and adjust frequency settings as needed to minimize environmental interference.

7. Specifiche

8. Garanzia e supporto

The main unit of the PQWT L3000 Water Leak Detector comes with lifetime maintenance. For further support or inquiries, please refer to the contact information provided by your vendor or visit the official PQWT websito.

9. Avvisi importanti

• It is forbidden to put the sensor into the water. Please handle the sensor gently.
• It is forbidden to use the device in flammable and explosive areas such as gasoline and natural gas.
• If it is for outdoor pipeline leak detection, please select the corresponding detection parameters according to the actual environment.
• If the instrument is not used for a long time, please charge it once a month at least.
• When detecting in areas with soft soil or a lawn, it is better to use the sensor to connect to the sound pole and insert it into the soil.