Manuale utente del supporto da scrivania per doppio monitor MOUNT PRO

Introduzione

Thank you for choosing the MOUNT PRO Dual Monitor Desk Mount. This product is engineered to enhance your workspace by providing a stable, adjustable, and ergonomic solution for mounting two computer monitors. Its robust design supports a wide range of monitor sizes and weights, allowing for flexible positioning and improved productivity. Please read this manual carefully before installation and use to ensure proper setup and safe operation.

Image: The MOUNT PRO Dual Monitor Desk Mount, showcasing its two articulating arms supporting two monitors, with both C-clamp and grommet mounting bases visible.

Informazioni sulla sicurezza

• Ensure your desk surface is strong enough to support the combined weight of the mount and your monitors.
• Non superare la capacità di peso massima di 26.4 libbre (12 kg) per braccio.
• Verify that your monitors are VESA compatible (75x75mm or 100x100mm) before installation.
• Tighten all screws securely, but do not overtighten to avoid damaging components.
• Tenere lontani bambini e animali domestici durante l'installazione.
• Adjust gas spring tension carefully to match monitor weight. Improper tension can cause monitors to fall or spring up unexpectedly.
• If any parts are missing or damaged, contact customer support immediately. Do not attempt to install with damaged parts.

Contenuto della confezione

Si prega di verificare che tutti i componenti siano presenti e in buone condizioni:

• Dual Monitor Gas Spring Arms (2)
• Scrivania Clamp Fondazione (1)
• Base passacavo (1)
• Piastre VESA (2)
• Hardware Kit (various screws, washers, spacers)
• Chiavi a brugola (varie dimensioni)
• Manuale di istruzioni (questo documento)

Impostare

1. Desk Compatibility Check

Ensure your desk meets the following requirements for stable installation:

• Dimensioni del monitor: 22" to 35" screens
• Peso del monitor: 4.4 - 26.4 lbs (2-12 kg) per arm
• Modello VESA: 75x75mm o 100x100mm
• Clamp Spessore del supporto: 0.4" - 3.3" (10-85 mm)
• Grommet Mount Thickness: 0.4" - 3.3" (10-85 mm)
• Diametro del foro passacavo: 0.39" - 2.36" (10-60 mm)

Image: Visual guide for checking monitor and desk compatibility, including screen size, weight, VESA, and desk thickness for both clamp e montaggio tramite passacavo.

2. Scegli la tua opzione di montaggio

The mount supports two installation methods: C-clamp o montaggio con occhiello.

• C-Clamp: Ideal for desks without existing holes. Clamps directly to the edge of the desk.
• Supporto passacavo: Requires an existing hole in your desk (or drilling one). Provides a more flush and permanent installation.

Image: Illustrations demonstrating the C-clamp installation method and the grommet mount installation method, showing how each attaches to a desk.

3. Fissare i monitor alle piastre VESA

Carefully attach the VESA plates to the back of your monitors using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened securely.

4. Mount Arms to Base

Slide the monitor arms onto the central pole of the chosen desk base (C-clamp or grommet). Secure them at your desired initial height using the provided locking mechanism.

5. Collegare i monitor ai bracci

Carefully slide the monitors (with VESA plates attached) onto the VESA head of each arm. Secure them with the locking screws.

6. Gestione dei cavi

Route your monitor cables through the integrated cable management channels on the arms. This helps maintain a clean and organized workspace.

Image: A monitor arm with cables neatly tucked into its integrated cable management system, illustrating how to achieve a clean desk setup.

Regolazioni operative

The MOUNT PRO Dual Monitor Desk Mount offers extensive adjustability to achieve your ideal viewesperienza di acquisizione.

1. Regolazione dell'altezza

The gas spring arms allow for smooth vertical movement. Simply push or pull the monitor to your desired height. The maximum height from the desk surface is approximately 19.7 inches.

Immagine: Lato A view of the monitor arm illustrating its maximum height of 19.7 inches and maximum extension of 22.6 inches from the mounting point.

2. Regolazione dell'inclinazione

The monitor can be tilted from +90° to -45° to reduce glare and optimize viewing angles. Loosen the tilting bolt, adjust to your desired angle, and then retighten.

3. Regolazione della rotazione

Swivel the monitor up to 180° at the VESA plate connection and 270° at the arm joints. This allows for easy screen sharing or repositioning.

4. Regolazione della rotazione

Rotate your monitor 360° from landscape to portrait orientation without removing it.

Image: A monitor on the arm demonstrating its ability to rotate 360 degrees, tilt +90/-45 degrees, and swivel +/-90 degrees, optimizing the view.

Image: A comprehensive diagram illustrating the various swivel points (360°, 270°, 180°), tilt range (+90°/-45°), and 360° rotation capability of the monitor arm.

5. Regolazione della tensione della molla a gas

The gas spring tension must be adjusted to match the weight of your monitor. This ensures the monitor stays in place at any height.

• Se il monitor raises up on its own: Turn the adjustment screw clockwise ("-" direction) to reduce tension for a lighter monitor.
• Se il monitor falls down on its own: Turn the adjustment screw counter-clockwise ("+" direction) to increase tension for a heavier monitor.

Importante: Keep the arm in a horizontal position during tension adjustment.

Image: A detailed diagram illustrating the process of adjusting the gas spring tension (for monitor weight) and the tilt adjustment mechanism on the monitor arm.

Image: A visual guide explaining how to perform tilt adjustment by loosening and retightening a bolt, and how to adjust tension for the gas spring based on whether the monitor raises or falls.

6. Multiple Screen Combinations

The dual arms allow for various screen configurations, including side-by-side, stacked, or one in portrait and one in landscape mode, to suit your workflow.

Image: A collage of six different monitor setups demonstrating the versatility of the dual monitor arm, including side-by-side, stacked, and mixed portrait/landscape orientations.

Manutenzione

• Pulizia: Pulisci il supporto con un panno morbido eamp panno. Evitare prodotti chimici aggressivi o detergenti abrasivi.
• Controlli periodici: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati e sicuri. Serrare nuovamente se necessario.
• Molla a gas: The gas spring is designed for long-term use and generally requires no maintenance. If you notice a change in performance, re-adjust the tension as described in the Operating Adjustments section.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

For warranty information and customer support, please refer to the official MOUNT PRO websito o contattare il rivenditore. Conservare la ricevuta d'acquisto per eventuali reclami in garanzia.

For further assistance, you may also refer to the official Installation Manual PDF available at: https://manuals.plus/m/3c23fe1a0f735670ea984c086d4da16b3695eb26e6ec38871f2edb82bf900f3f