Introduzione
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight Closet Light YLBGD-0045. This motion sensor wardrobe light is designed to provide convenient and efficient illumination in various indoor spaces. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Contenuto della confezione
Verificare che tutti i componenti siano presenti nella confezione:
- Yeelight Closet Light (1 unit)
- Mounting accessories (e.g., magnetic strips, adhesive pads)
- Cavo di ricarica USB Type-C
- Manuale d'uso
Note: The product is typically supplied as a single package containing the light and necessary accessories.
Configurazione e installazione
The Yeelight Closet Light features a magnetic design for easy installation and removal, particularly for charging.
- Scegli la posizione: Select a clean, dry, and flat surface for installation, such as inside a wardrobe, under kitchen cabinets, or on a bookshelf.
- Prepara la superficie: Clean the chosen surface thoroughly to ensure optimal adhesion for the magnetic pads.
- Fissare i cuscinetti magnetici: Peel off the protective film from one side of the adhesive magnetic pads and firmly press them onto the desired installation surface.
- Monte Luce: Align the magnetic back of the Yeelight Closet Light with the installed magnetic pads. The light will securely attach magnetically.
- Carica iniziale: Before first use, fully charge the light using the provided USB Type-C cable. The charging indicator will be red during charging and turn off when fully charged.
Image: Magnetic installation of the Yeelight Closet Light. The light can be easily removed for charging.
Image: The Type-C charging port and indicator light. Red indicates charging, light off indicates full charge.
Istruzioni per l'uso
The Yeelight Closet Light offers multiple operating modes and adjustable brightness.
Selezione della modalità
Locate the mode switch on the light. Typically, there are three modes:
- Modalità AUTO (Sensore di movimento): In this mode, the light automatically turns on when motion is detected in a dark environment and turns off after a period of no motion (e.g., 20 seconds). The motion sensor has a detection range of approximately 120 degrees and up to 13 feet.
- Always-ON Mode: La luce rimane sempre accesa, indipendentemente dal movimento o dalla luce ambientale.
- Modalità SPENTO: La luce è spenta.
Image: Illustration of the automatic motion sensor light in action, detecting motion within a 120-degree angle and up to 13 feet.
Oscuramento continuo
In Always-ON Mode, you can adjust the brightness of the light:
- Regola luminosità: Long press the control button to cycle through brightness levels. Release the button when the desired brightness is achieved.
Image: Demonstrates stepless dimming capability, showing the light at various brightness levels (20%, 50%, 100%).
Manutenzione
Proper maintenance ensures the longevity and optimal performance of your Yeelight Closet Light.
- Pulizia: Wipe the light with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- Cura della batteria: To prolong battery life, avoid fully discharging the light frequently. Recharge the light when the indicator shows low battery.
- Magazzinaggio: If storing the light for an extended period, charge it to approximately 50% and store in a cool, dry place. Recharge every few months to prevent deep discharge.
- Adhesive Pads: If the adhesive pads lose their stickiness over time, replace them with new double-sided adhesive tape suitable for the application.
Risoluzione dei problemi
If you encounter issues with your Yeelight Closet Light, refer to the following common solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende in modalità AUTO. | Insufficient darkness; battery low; motion not detected; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the light. Check if the sensor is clean and unobstructed. Verify motion is within detection range. |
| La luce non si carica. | Faulty cable; faulty adapter; charging port issue; battery degradation. | Try a different USB Type-C cable and power adapter. Ensure the cable is fully inserted. If the issue persists, the battery may be degraded (refer to warranty). |
| La luce cade dalla superficie di montaggio. | Adhesive pads lost stickiness; surface not clean. | Clean the mounting surface thoroughly. Replace the adhesive pads with new, strong double-sided tape. |
| La luminosità non può essere regolata. | Not in Always-ON mode. | Ensure the light is switched to Always-ON mode before attempting to adjust brightness via long press. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | Numero di modello: YLBGD-0045 |
| Marca | Yeelight |
| Colore | Nero |
| Temperatura del colore della luce | 4000 K (bianco neutro) |
| Lunghezza | 40 centimetri |
| Numero di sorgenti luminose | 1 |
| Peso dell'articolo | 8.78 once (circa 249 grammi) |
| Fonte di alimentazione | Ricaricabile (USB Type-C) |
| Gamma del sensore di movimento | Approx. 120 degrees, up to 13 feet |
| Assemblaggio richiesto | Yes (minor, mounting) |
Informazioni sulla garanzia
The Yeelight Closet Light YLBGD-0045 comes with a manufacturer's warranty.
- Periodo di garanzia: 2 anni di garanzia del produttore.
- Copertura: Questa garanzia copre i difetti nei materiali e nella lavorazione in condizioni di utilizzo normale.
- Esclusioni: La garanzia non copre i danni causati da uso improprio, incidenti, modifiche non autorizzate o normale usura.
- Procedura di richiesta: For warranty claims, please retain your proof of purchase and contact the retailer or Yeelight customer support.
Supporto
For further assistance or inquiries not covered in this manual, please refer to the following:
- Risorse online: Visit the official Yeelight website for FAQs, product updates, and additional support documentation.
- Assistenza clienti: Contact Yeelight customer support through their official channels if you require technical assistance or have specific product-related questions.