LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Modello: 65636 | Marca: LEDVANCE
Informazioni importanti sulla sicurezza
- Solo per uso interno: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Sicurezza elettrica: Assicurarsi che l'adattatore di alimentazione sia collegato a una presa di corrente idonea. Non sovraccaricare i circuiti elettrici.
- Istruzioni per il taglio: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Installazione: Scollegare sempre l'alimentazione prima dell'installazione o della manutenzione.
- Calore: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Bambini: Tenere il prodotto e i suoi componenti fuori dalla portata dei bambini.
Contenuto della confezione
Verifica che tutti i componenti siano presenti nel tuo pacchetto:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Alimentazione
- (1) IR Remote Controller (with battery included)
- (20) Clip di montaggio
Image: Main product image showing the light strips, remote, power adapter, and clips.
Configurazione e installazione
- Preparare la superficie: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Collegare i componenti: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Funzionalità di prova: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Attiva remoto: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operazione
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Funzioni del telecomando:
- ACCESO/SPENTO: Power the light strips on or off.
- Selezione del colore: Choose from 16 static colors using the color buttons.
- dimming: Adjust the brightness of the selected color or dynamic mode.
- Modalità dinamiche: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Manutenzione
- Pulizia: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Durata: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Sostituzione della batteria remota: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Le luci non si accendono. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Il telecomando non risponde. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | 65636 |
| Marca | LEDVANCE (Sylvania) |
| Colore | RGB (16 colors) + White |
| Lunghezza | 32ft (2 x 16.4ft strips) |
| Utilizzo | Solo al chiuso |
| Caratteristiche speciali | Cambia colore, dimmerabile, a risparmio energetico |
| Tipo di sorgente luminosa | GUIDATO |
| Fonte di alimentazione | Elettrico con cavo |
| Tipo di controllore | Telecomando IR |
| Voltage | 12 Volt |
| Cosatage | 24 watt |
| Connettività | Infrarossi |
| Materiale | Plastica |
| Peso dell'articolo | 10.88 once |
| Durata | Fino a 30,000 ore |
| Resistenza all'acqua | Non resistente all'acqua |
| Codice UPC | 046135656361 |
Garanzia e supporto
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garanzia del produttore di 1 anni.
Per supporto tecnico, reclami in garanzia o ulteriori informazioni sul prodotto, visitare il sito ufficiale LEDVANCE websito o contattare il loro servizio clienti.
Puoi anche visitare il Negozio LEDVANCE su Amazon per ulteriori prodotti e informazioni.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.