Altoparlanti da soffitto Bluetooth Herdio da 6.5 ​​pollici con montaggio a parete Amppiù vivace

Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier. This system is designed to deliver high-fidelity audio for various indoor environments, including home theaters, bathrooms, living rooms, kitchens, and offices. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1x Wall Mount Bluetooth Amppiù vivace
• Adattatore CA 1x
• 2x Viti
• 2x 6.5-inch In-Ceiling Speakers
• 2x Speaker Wires
• 2x User Manuals (one for amplifier, one for speakers)

Impostare

This section guides you through the physical installation and wiring of your Herdio ceiling speaker system.

1. Amplificatore Installazione

Il muro amplifier is designed for flush mounting in a standard wall plate size. Ensure you have appropriate wiring access before proceeding.

1. Prepara il muro: Use the provided template (if applicable) to mark and cut an opening in the wall for the amppiù vivace.
2. Collegare il cavo di alimentazione: Connect the 12V DC power cable to the designated two-pin connector on the back of the ampmodulo lificatore.
3. Collegare il cavo audio: Connect the audio cable to the three-pin connector on the back of the ampmodulo lificatore.
4. Sicuro Amplificatore: Inserire il amplifier module into the wall opening and secure it using the provided screws.
5. Fissare la mascherina: Place the decorative faceplate over the installed amplifier and secure it.

2. Installazione degli altoparlanti

The ceiling speakers are designed for flush mounting. Ensure you have appropriate ceiling space and wiring access.

1. Segna ritaglio: Use the provided cutout template to mark the desired location for each speaker in the ceiling.
2. Apertura di taglio: Carefully cut the circular opening in the ceiling according to the marked template. The cutout diameter is approximately 8.07 inches (20.5 cm).
3. Rimuovere la griglia: Gently remove the magnetic grille from the front of each speaker.
4. Collegare i cavi degli altoparlanti: Connect the speaker wires to the spring-loaded terminals on the back of each speaker. Ensure correct polarity: red wire to positive (+) terminal, black wire to negative (-) terminal.
5. Inserisci altoparlante: Insert the speaker into the ceiling opening. The mounting clamps will automatically engage.
6. Stringere Clamps: Use a screwdriver to tighten the screws on the front baffle of the speaker. This will rotate the mounting clamps and secure the speaker firmly in place.
7. Replace Grille: Reattach the magnetic grille to the speaker.

3. Schema elettrico

Connect the speaker wires from the ceiling speakers to the amplifier terminals. Ensure correct polarity for both speakers (red to +, black to -).

4. Collegamento elettrico

Connect the AC adapter to a standard 120V power outlet and then plug the DC end into the amplifier's power input. The power LED on the amplifier will illuminate.

Istruzioni per l'uso

Learn how to use your Herdio ceiling speaker system.

1. Accensione/spegnimento e controllo del volume

Turn the knob on the amplifier clockwise to power on the unit and increase the volume. Turn it counter-clockwise to decrease volume and power off. You will hear an audible drop sound when powering on.

2. Accoppiamento Bluetooth

After powering on, the blue Bluetooth indicator light will flash, indicating it is in pairing mode. On your smart device (phone, tablet, etc.), search for available Bluetooth devices and select 'Herdio'. Once connected, the blue light will remain solid.

3. Selezione ingresso

Use the input selection switch on the amplifier to choose between Bluetooth (BT), Auxiliary (AUX), or Microphone (MIC) input modes.

4. USB Functionality

The USB port functions as a flash memory reader for media playback and also provides a charging port for your devices (5V/1A).

5. Ingresso microfono

Connect a microphone to the 1/4-inch MIC IN jack for paging or voice applications.

Manutenzione

To ensure the longevity and optimal performance of your Herdio ceiling speakers and amplifier, seguire queste linee guida per la manutenzione:

• Pulizia: Utilizzare un panno morbido e asciutto per pulire il amplifier faceplate and speaker grilles. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
• Rimozione della polvere: Periodically use a soft brush or a low-power vacuum with a brush attachment to gently remove dust from the speaker grilles.
• Condizioni ambientali: Ensure the speakers and amplifier are installed in environments free from excessive moisture, extreme temperatures, and direct sunlight. The product is not waterproof.
• Ispezione del cablaggio: Controllare periodicamente tutti i collegamenti elettrici per accertarsi che siano saldi e privi di corrosione o danni.

Risoluzione dei problemi

If you encounter issues with your Herdio ceiling speaker system, refer to the following common problems and solutions:

• Nessun potere:
  • Ensure the AC adapter is securely plugged into a working power outlet and the amplifier's DC input.
  • Check if the power knob on the amplifier is turned clockwise to the 'ON' position.
  • Verificare che la presa di corrente funzioni collegandovi un altro dispositivo.
• Nessun suono dagli altoparlanti:
  • Confirm that the speaker wires are correctly connected to both the speakers and the amplifier, observing proper polarity (+ to +, - to -).
  • Assicurarsi che la manopola del volume sul ampil lifier è alzato.
  • Check the input selection switch on the amplifier to ensure the correct source (BT, AUX, MIC) is selected.
  • Se utilizzi il Bluetooth, assicurati che il dispositivo sia associato e che stia riproducendo l'audio.
  • If using AUX or MIC, ensure the external device is connected and functioning correctly.
• Problemi di connessione Bluetooth:
  • Assicurare il amplifier is in Bluetooth pairing mode (blue light flashing).
  • Make sure your Bluetooth device is within the 30+ feet wireless range.
  • Forget the 'Herdio' device from your smart device's Bluetooth settings and attempt to re-pair.
  • Riavviare entrambi amplifier e il tuo dispositivo Bluetooth.
• Suono distorto:
  • Ridurre il volume su entrambi i amplifier e il dispositivo sorgente audio.
  • Controllare i collegamenti dei cavi degli altoparlanti per verificare che non vi siano fili allentati o cortocircuiti.
  • Ensure the audio source is not overdriven or producing distorted signals.

Specifiche

Informazioni sulla garanzia

The Herdio 6.5-inch Bluetooth Ceiling Speakers with In-Wall Amplifier viene fornito con un Garanzia limitata. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included in your package or contact Herdio customer support directly.

Supporto

Per ulteriore assistenza, supporto tecnico o domande riguardanti il ​​tuo prodotto Herdio, visita il sito ufficiale Herdio website or contact their customer service department. Contact information can typically be found on the product packaging or on the Herdio websito.