Introduzione
Thank you for choosing the FLYLINKTECH Car Jump Starter with Air Compressor. This versatile device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and LED light source. Please read this manual thoroughly before use to ensure safe and optimal operation.
Prodotto finitoview
The FLYLINKTECH CF700 is a multi-functional device combining a powerful jump starter, a 150 PSI air compressor, a 24000mAh power bank, and an emergency LED light. It is suitable for all gas engines and diesel engines up to 8.0L.
Figure 1: What's in the Box - The jump starter unit, smart jumper cables, air hose with various nozzles, USB charging cable, and carrying case.
Caratteristiche principali
- Battery Starter: 2500A peak current, 1200A starting current, capable of starting all gas and 8.0L diesel engines.
- Banca di potere: 24000mAh capacity with 2 USB outputs (one Quick Charge) and a DC 12-16.8V / 10A port for charging various devices and car accessories.
- Tire Compressor: Powerful 150 PSI inflator with a digital display for setting desired pressure and automatic shut-off. Includes pins for inflating balls, rubber boats, and mats.
- Luce LED di emergenza: 5W bright LED light with multiple modes (stable, SOS, strobe) for emergency situations, night breakdowns, or repairs.
- Presa 12V: Connects various car accessories such as additional USB chargers or car fans.
- Sistema di protezione intelligente: Features short circuit protection, high/low temperature protection, reverse connection protection, surge voltage protezione, alto voltage protection, and over discharge protection.
Figura 2: Oltreview of the multi-functional features of the device.
Informazioni sulla sicurezza
Always follow these safety guidelines to prevent injury or damage to the device and vehicle:
- Leggere tutte le istruzioni prima di utilizzare il prodotto.
- Non immergere il prodotto in acqua.
- Non utilizzare il prodotto in atmosfere esplosive, ad esempio in presenza di liquidi, gas o polvere infiammabili.
- Tenere fuori dalla portata dei bambini.
- Ensure proper polarity connection when jump-starting to avoid sparks and damage. The smart clamp provides protection against reverse connection.
- Do not touch the air hose connector immediately after prolonged inflation, as it may be hot.
Figure 3: The device incorporates multiple safety protections for user and vehicle safety.
Impostare
Caricamento del dispositivo
Before first use, fully charge the jump starter. Use the provided USB-C charging cable to connect the device to a compatible USB power adapter (not included). The digital display will indicate the charging status. It is recommended to recharge the device every 3-6 months to maintain battery health, even if not in use.
Istruzioni per l'uso
1. Avviamento di emergenza di un veicolo
- Assicurarsi che l'avviatore di emergenza sia sufficientemente carico.
- Connect the smart jumper cables to the jump starter's jumping port.
- Attacca il cl rossoamp al terminale positivo (+) della batteria del veicolo.
- Attacca il nero clamp al terminale negativo (-) della batteria del veicolo. La smart clamp will indicate a safe connection (e.g., green light).
- Avviare il motore del veicolo.
- Una volta avviato il motore, rimuovere immediatamente il clamps from the battery, then disconnect the smart jumper cables from the jump starter.
Figura 4: Collegamento corretto per l'avviamento di emergenza di un veicolo.
Video 1: Demonstration of jump starting a vehicle using a similar device. The video shows connecting the clamps to the battery and starting the car.
2. Gonfiaggio dei pneumatici
- Screw the air hose into the designated port on the jump starter.
- Fissare saldamente l'ugello del tubo dell'aria allo stelo della valvola del pneumatico.
- Turn on the device and select the desired pressure unit (PSI, BAR, KPA).
- Utilizzare i pulsanti '+' e '-' per impostare la pressione target degli pneumatici.
- Premere il pulsante di avvio per iniziare il gonfiaggio. Il compressore si arresterà automaticamente una volta raggiunta la pressione preimpostata.
- Disconnect the air hose from the tire valve and then from the jump starter.
Figure 5: The device connected to a car tire for inflation.
Video 2: A seller demonstration of the car jump starter's air compressor function, showing how to connect and inflate a tire.
3. Utilizzo come Power Bank
Connect your electronic devices (phones, tablets, etc.) to the USB output ports or car accessories to the DC 12-16.8V / 10A port for charging.
Figure 6: The device being used to charge multiple electronic devices.
4. Utilizzo della luce LED
Press and hold the light button to turn on the LED light. Short presses will cycle through different modes: stable light, SOS signal, and strobe light. Press and hold again to turn off.
Figure 7: The device's LED light providing illumination in a dark setting.
Manutenzione
- Mantenere il dispositivo pulito e asciutto.
- Conservare in un luogo fresco e asciutto, lontano dalla luce solare diretta e dalle alte temperature.
- Recharge the device at least once every 3-6 months to prevent deep discharge and prolong battery life.
- Prima di ogni utilizzo, ispezionare i cavi e gli accessori per verificare che non presentino danni.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Device does not turn on/charge | Battery completely depleted or charging cable/adapter faulty. | Ensure charging cable and adapter are working. Try a different charging source. Allow sufficient time for initial charge. |
| Il veicolo non si avvia con i cavi | clamp connection, insufficient device charge, or vehicle battery severely damaged. | Controllare clamp polarity and ensure secure connection. Fully charge the jump starter. Consult a mechanic if vehicle battery is beyond jump-starting. |
| Il compressore d'aria non si gonfia | Air hose not securely attached, incorrect pressure setting, or device not powered on. | Ensure air hose is tightly screwed in and nozzle is secure on valve. Verify pressure setting and device power. |
| Air compressor stops prematurely | Preset pressure reached (automatic shut-off). | This is normal operation. Check the current tire pressure. |
Specifiche
- Marca: TECNOLOGY DI FLYLINK
- Modello: CF700
- Corrente di picco: 2500A
- Corrente di avviamento: 1200A
- Capacità della batteria: 24000mAh
- Tipo di servizio del veicolo: Passenger Car (All Gas or 8.0L Diesel)
- Pressione del compressore d'aria: 150 bar
- Uscita USB: 2 ports (one Quick Charge)
- Uscita CC: 12-16.8 V / 10 A.
- Peso dell'articolo: 5.74 libbre
- Dimensioni del prodotto: 8.66 x 6.69 x 3.35 pollici
- Composizione delle celle della batteria: Ioni di litio
- Voltage: 12 Volt
Garanzia e supporto
Questo prodotto viene fornito con un 24-Months Global Warranty. FLYLINKTECH is committed to providing Life Time After-sale Service & Technical Support. For any inquiries or assistance, please contact FLYLINKTECH customer service.