FLYCOLOR Turbo 1/76 Scale Mini RC Car (Model C73) User Manual

1. Introduzione

Welcome to the world of precision remote-controlled racing with your new FLYCOLOR Turbo 1/76 Scale Mini RC Car, Model C73. This manual provides essential information for setting up, operating, and maintaining your vehicle to ensure optimal performance and longevity. Please read this manual thoroughly before first use.

2. Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

• 1x FLYCOLOR Turbo 1/76 Scale Mini RC Car (Model C73)
• 1x 2.4G Remote Controller (P21)
• 1x Cavo di ricarica di tipo C
• 2x Spare Car Body Shells (original color)
• 1x Set of Spare Tires (for drift)
• 1x Set of Spare Tires (for speed)
• Mini Cones for practice
• Manuale d'uso

3. Impostazione

3.1. Ricarica della batteria dell'auto RC

The RC car is equipped with a built-in 40mAh Lithium Polymer battery.

1. Locate the Type-C charging port on the underside of the RC car.
2. Connect the provided Type-C charging cable to the car and to a suitable USB power source (e.g., computer, USB wall adapter).
3. La spia di carica sull'auto si accenderà durante la ricarica e si spegnerà quando la carica sarà completamente completata.
4. Charging time is approximately 30 minutes for up to 30 minutes of operation.

Image: The underside of the FLYCOLOR Turbo C73 RC Car showing the Type-C charging port. The car is grey with green stripes and has LED lights.

3.2. Installazione delle batterie del telecomando

The P21 remote controller requires 4x AAA batteries (not included).

1. Aprire il vano batterie sul retro del telecomando.
2. Inserisci 4 batterie AAA, assicurandoti la corretta polarità.
3. Chiudere bene il vano batterie.

3.3. Pairing the Remote Controller and Car

The car and remote controller are typically pre-paired. If re-pairing is needed:

1. Ensure both the car and remote controller are powered off.
2. Turn on the RC car. The car's LED lights will flash.
3. Accendere il telecomando. La spia luminosa del telecomando lampeggerà.
4. Once paired, the car's LED lights and the remote's indicator light will become solid.

4. Istruzioni per l'uso

4.1. Controlli di base

• Grilletto dell'acceleratore: Tirare per andare avanti, spingere per frenare/fare retromarcia.
• Volante: Girare a sinistra o a destra per sterzare l'auto.
• Interruttore di velocità: Adjust between 20%, 50%, and 100% speed limits.
• Regolazione del giroscopio: Fine-tune the gyroscope sensitivity for stable drifting.
• Interruttore della luce: Control the high simulation headlights (double flash function) and chassis LED lights (controlled by channel 3).

Image: The P21 remote controller and the FLYCOLOR Turbo C73 RC Car, showing their relative sizes and key control features on the remote.

4.2. Aggiornamento della curva THR

The THR-Curve has been upgraded for enhanced control:

• The first 50% of the accelerator provides a slow, linear speed increase for gentle control.
• The latter 50% of the accelerator delivers faster, stronger power output for exciting acceleration.

4.3. Swappable Tires

Your car comes with two sets of tires: one for speed and one for drifting.

1. To change tires, gently pull the existing tires off the wheel hubs.
2. Align the new tires with the wheel hubs and push them firmly into place.
3. Ensure all tires are securely attached before operation.

5. Manutenzione

5.1. Pulizia

Regular cleaning helps maintain performance and extends the lifespan of your RC car.

• Use a soft, dry cloth to wipe down the car body and remote controller.
• Remove any dust or debris from the wheels and chassis using a small brush or compressed air.
• Avoid using water or chemical cleaners, as these can damage electronic components.

5.2. Cura della batteria

• Always fully charge the car battery before storage.
• Non sovraccaricare o scaricare completamente la batteria.
• Remove AAA batteries from the remote controller if not in use for extended periods.

5.3. Removable Car Shell

The car body shell is designed to be easily disassembled for customization or maintenance.

• The car shell and chassis are easily buckled, requiring no screws for replacement.
• Two additional car body shells are included for customization.

Immagine: dettagliata view of the FLYCOLOR Turbo C73 RC Car's internal components, including the potentiometer, PCBA, and battery, demonstrating its integrated design.

6. Risoluzione Dei Problemi

7. Specifiche

• Modello: C73
• Scala: 1/76
• Dimensioni: 1.57 x 0.59 x 0.59 pollici
• Peso: 9.1 once
• Batteria (auto): Polimeri di litio da 40 mAh (inclusi)
• Porta di ricarica: Tipo C
• Tempo di ricarica: Circa 30 minuti
• Tempo di funzionamento: Fino a 30 minuti
• Telecomando: 2.4G P21 (requires 4x AAA batteries, not included)
• Caratteristiche: Proportional throttle and steering, THR-Curve upgrade, High simulation LED headlights (double flash), Chassis LED lights, Taillights, Stoplights, DIY removable car shell, Swappable tires (speed/drift).
• Età consigliata: 14 anni e oltre

8. Informazioni sulla garanzia

This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or contact FLYCOLOR customer support for specific warranty terms and conditions. Keep your purchase receipt as proof of purchase.

9. Assistenza clienti

For technical assistance, troubleshooting, or general inquiries, please visit the official FLYCOLOR websito o contattare il nostro team di assistenza clienti.

• FLYCOLOR Store: Visit the FLYCOLOR Store on Amazon
• Supporto online: Refer to the contact information provided on the product packaging.