Philips Splay LED Outdoor Wall Lamp con sensore di movimento

Introduzione

The Philips Splay LED Outdoor Wall Lamp is designed to provide efficient and reliable outdoor illumination. This manual provides essential information for the safe installation, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.

Informazioni sulla sicurezza

Osservare le seguenti precauzioni di sicurezza per evitare lesioni o danni:

• L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto delle normative locali in materia di cablaggio.
• Scollegare l'alimentazione dall'interruttore automatico prima di procedere all'installazione, alla manutenzione o alla pulizia.
• Do not attempt to modify the product. Unauthorized modifications may void the warranty and create safety hazards.
• Ensure the product is securely mounted to a stable surface capable of supporting its weight.
• This product is rated IP44 for outdoor use, providing protection against splashing water. It is not suitable for submersion.

Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• Philips Splay LED Outdoor Wall Lamp (1 unità)
• Materiale di montaggio (viti, tasselli)
• Manuale di istruzioni (questo documento)

Configurazione e installazione

Per una corretta installazione, seguire questi passaggi:

1. Passaggio 1: scegli la posizione: Select a suitable outdoor location for the wall lamp. Ensure the mounting surface is flat and stable. Consider the motion sensor's detection range and desired illumination area.
2. Passaggio 2: scollegare l'alimentazione: Before starting any electrical work, turn off the main power supply to the installation area at the circuit breaker.
3. Fase 3: montare il dispositivo: Use the provided mounting hardware to securely attach the lamp's base to the wall. Mark drilling points, drill holes, insert wall plugs, and fasten the base firmly.

Image Description: The Philips Splay LED Outdoor Wall Lamp is shown mounted on a grey exterior wall, providing downward illumination. The lamp is positioned to the left of a white patio door, with two potted plants on a small wooden table beneath it.

4. Passaggio 4: collegamenti elettrici: Connect the electrical wires from your home's wiring to the lamp's terminals. Ensure correct polarity (Live, Neutral, Earth) according to local electrical codes. Refer to the wiring diagram provided with the product for specific connections.
5. Step 5: Secure the Lamp: Once wiring is complete, attach the lamp body to the mounted base, ensuring all connections are secure and weatherproof.
6. Passaggio 6: ripristinare l'alimentazione: Riattivare l'alimentazione principale tramite l'interruttore automatico.

Istruzioni per l'uso

The Philips Splay LED Outdoor Wall Lamp è dotato di un sensore di movimento integrato per il funzionamento automatico.

Funzionalità del sensore di movimento

• Il lamp will automatically turn on when motion is detected within its sensing range.
• It will remain illuminated for a set duration, typically adjustable via controls on the fixture (refer to product-specific labels for adjustment details).
• Il lamp will turn off automatically when no motion is detected for the set duration.

Potenza luminosa

• The integrated LED provides 800 lumens of cool white light (4000K).
• The light is diffused for broad and even illumination, suitable for various outdoor settings.

Image Description: The Philips Splay LED Outdoor Wall Lamp is shown mounted on a vibrant green background, with a bright cool white light emanating from its LED panel, illustrating its illumination capability.

Manutenzione

To ensure optimal performance and longevity of your Philips Splay LED Outdoor Wall Lamp, segui queste semplici linee guida per la manutenzione:

• Pulizia: Pulire periodicamente il lampesterno con un morbido, damp panno. Non utilizzare detergenti abrasivi, solventi o prodotti chimici aggressivi, poiché potrebbero danneggiare la finitura o i componenti elettrici.
• Sorgente luminosa a LED: The LED light source in this fixture is integrated and not user-replaceable. Do not attempt to open the lamp housing to access the LEDs.
• Ispezione: Ispezionare regolarmente la lamp per eventuali segni di danni, collegamenti allentati o usura. In caso di problemi, scollegare l'alimentazione e consultare un elettricista qualificato.

Risoluzione dei problemi

If you encounter issues with your Philips Splay LED Outdoor Wall Lamp, fare riferimento ai seguenti problemi comuni e alle relative soluzioni:

Lamp Non si accende

• Controllare l'alimentazione: Ensure the circuit breaker for the lamp is in the "ON" position.
• Verifica cablaggio: Confirm that all electrical connections are secure and correctly wired. If unsure, consult a qualified electrician.
• Motion Sensor Obstruction: Ensure the motion sensor lens is clean and not obstructed by dirt, debris, or objects.
• Luce ambientale: The sensor may be designed not to activate in bright ambient light conditions. Test the lamp in darker conditions.

Lamp Stays On Continuously

• Movimento continuo: Check if there is constant motion within the sensor's detection range.
• Impostazioni del sensore: If adjustable, the sensor sensitivity or duration setting might be set too high.
• Problema di cablaggio: Incorrect wiring can sometimes cause the lamp to remain on. Consult a qualified electrician.

Lamp Sfarfallio

• Collegamenti allentati: Disconnect power and check all electrical connections for tightness.
• Fluttuazioni di potenza: Ensure a stable power supply. If flickering persists across multiple fixtures, consult an electrician.
• LED danneggiato: If flickering persists after checking connections and power, the integrated LED unit may be faulty. Contact customer support.

Specifiche tecniche

Image Description: A line drawing illustrates the key dimensions of the Philips Splay LED Outdoor Wall Lamp. The height is indicated as 240mm, the width as 80mm, and the depth from the wall as 160mm.

Informazioni sulla garanzia

This Philips Splay LED Outdoor Wall Lamp è coperto da un Garanzia di 5 anno from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full terms and conditions, please refer to the official Philips warranty policy or contact customer support.

Assistenza clienti

For further assistance, technical support, or warranty inquiries, please visit the official Philips support websito o contattare il loro servizio clienti.

Official Philips Support: www.philips.com/support