Ruijie Reyee Wi-Fi 6 Punto di accesso a soffitto RG-RAP2260(G) Manuale dell'utente

1. Introduzione

This manual provides detailed instructions for the installation, configuration, operation, and maintenance of your Ruijie Reyee Wi-Fi 6 Ceiling Access Point, model RG-RAP2260(G). Please read this manual thoroughly before using the device to ensure proper setup and optimal performance.

2. Informazioni sulla sicurezza

• Alimentazione elettrica: Use only the specified power adapter (DC 12V/1.5A) or a Power over Ethernet (PoE) source that complies with IEEE 802.3at/af standards.
• Ambiente di installazione: Install the device in a dry, well-ventilated area, away from direct sunlight, heat sources, and strong electromagnetic fields.
• Montaggio: Ensure the device is securely mounted to a stable surface (ceiling or wall) to prevent accidental falls.
• Manutenzione: Non aprire il dispositivo casing. Affidare tutti gli interventi di manutenzione a personale qualificato.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• 1 x Ruijie Reyee Wi-Fi 6 Ceiling Access Point (RG-RAP2260(G))
• Staffa di fissaggio
• Viti e tasselli
• Guida rapida (potrebbe essere inclusa separatamente)

4. Prodotto finitoview

The Ruijie Reyee RG-RAP2260(G) is a high-performance Wi-Fi 6 (802.11ax) ceiling-mounted access point designed for robust wireless connectivity.

4.1 Front View

Descrizione dell'immagine: Questa immagine mostra la parte anteriore view of the Ruijie Reyee RG-RAP2260(G) access point. It is a square-shaped white device with a subtle X-pattern on its surface, featuring the 'Ruijie | Reyee' logo centrally and 'WiFi 6' text at the bottom. A small LED indicator is visible at the top edge.

4.2 Posteriore View e porti

Descrizione dell'immagine: This image shows the rear panel of the Ruijie Reyee RG-RAP2260(G) access point. It features several ports and a reset button. From left to right, the ports are labeled 'RESET', 'LAN2', 'LAN1/PoE', and 'DC=12V'. There are also mounting points visible around the perimeter.

4.3 Indicatori LED

The LED indicator on the front of the device provides status information:

• Blu fisso: Il dispositivo funziona normalmente.
• Blu lampeggiante: Il dispositivo si sta avviando o sta eseguendo un aggiornamento del firmware.
• Rosso pieno: Device error or failure.
• Spento: Il dispositivo è spento.

5. Impostazione

5.1 Montaggio del punto di accesso

1. Scegli una posizione: Select a central location on a ceiling or wall for optimal Wi-Fi coverage. Avoid obstructions.
2. Installare la staffa di montaggio: Use the provided screws and wall plugs to securely attach the mounting bracket to the chosen surface.
3. Collega punto di accesso: Align the access point with the mounting bracket and twist it clockwise until it locks into place.

5.2 Alimentazione del dispositivo

The RG-RAP2260(G) can be powered in two ways:

• Alimentazione su Ethernet (PoE): Connect an Ethernet cable from a PoE-enabled switch or injector to the LAN1/PoE port on the access point. This provides both power and data connectivity.
• Adattatore di alimentazione CC: Connect a 12V/1.5A DC power adapter (sold separately) to the DC = 12V port. Then, connect an Ethernet cable from your network to either the LAN1/PoE or LAN2 port for data.

5.3 Configurazione iniziale

You can configure the access point using the Reyee Cloud App or a web browser.

5.3.1 Using the Reyee Cloud App

1. Download the Reyee Cloud App from your mobile app store.
2. Register or log in to your Reyee Cloud account.
3. Tap '+' to add a new device and follow the on-screen instructions to scan the QR code on the device or manually add it.
4. Configura il nome della tua rete Wi-Fi (SSID) e la password.

5.3.2 Utilizzando un Web Navigatore

1. Connect your computer to the access point's network (either directly via Ethernet or to its default Wi-Fi SSID, if broadcast).
2. Aprire un web browser and enter the default IP address (refer to the Quick Start Guide or device label for the specific IP, commonly 192.168.1.1 or 192.168.120.1).
3. Enter the default username and password (e.g., admin/admin or as specified on the device label).
4. Follow the setup wizard to configure your network settings, including SSID, security type, and password.

6. Operativo

6.1 Connessione dei dispositivi al Wi-Fi

Once configured, your Wi-Fi network will be broadcast. On your wireless devices (smartphones, laptops, tablets):

1. Go to Wi-Fi settings.
2. Select your configured Wi-Fi network name (SSID).
3. Inserisci la password Wi-Fi.
4. Collegare.

6.2 Rete ospite

The RG-RAP2260(G) supports a guest network feature. This allows you to provide internet access to guests without giving them access to your main network resources. This feature can be enabled and configured through the Reyee Cloud App or the web interfaccia di gestione.

• Enable Guest Mode.
• Set a separate SSID and password for the guest network.
• Configure bandwidth limits or access restrictions if desired.

7. Manutenzione

7.1 Aggiornamenti firmware

Regularly updating the firmware ensures optimal performance, security, and access to new features. Firmware updates can typically be managed via the Reyee Cloud App or the web management interface. It is recommended to perform updates during off-peak hours.

7.2 Pulizia

To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the casing o componenti interni.

7.3 Ripristino delle impostazioni di fabbrica

To restore the access point to its factory default settings:

1. Assicurati che il dispositivo sia acceso.
2. Individuare il RESET button on the rear panel (refer to Section 4.2).
3. Using a paperclip or a similar pointed object, press and hold the RESET button for approximately 5-10 seconds until the LED indicator changes.
4. Rilascia il pulsante. Il dispositivo si riavvierà con le impostazioni predefinite di fabbrica.

8. Risoluzione Dei Problemi

8.1 Nessun potere

• Check if the power adapter is securely connected to the DC=12V port and a power outlet, or if the PoE source is active and connected to the LAN1/PoE port.
• Verificare che la presa di corrente funzioni.

8.2 Nessun segnale Wi-Fi

• Ensure the device is powered on and the LED indicator is solid blue.
• Check if the Ethernet cable is properly connected to the LAN1/PoE or LAN2 port and to your network.
• Verify Wi-Fi settings (SSID, password) in the configuration interface.
• Riavvia il punto di accesso.

8.3 Velocità Wi-Fi lenta

• Verificare la presenza di interferenze da parte di altri dispositivi o reti wireless.
• Assicurarsi che il punto di accesso sia posizionato in una posizione ottimale, libera da ostacoli.
• Verifica la velocità del tuo fornitore di servizi Internet.
• Aggiornare il firmware del punto di accesso all'ultima versione.

9. Specifiche

10. Garanzia e supporto

10.1 Informazioni sulla garanzia

This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging or visit the official Ruijie websito per termini e condizioni di garanzia dettagliati specifici per la tua regione.

10.2 Supporto tecnico

For technical assistance, troubleshooting, or further inquiries, please contact Ruijie Networks customer support. Support resources, including FAQs and contact details, are available on the official Ruijie websito:

• Websito: www.ruigienetworks.com
• E-mail/Telefono: Fare riferimento al websito per informazioni di contatto regionali.