Pro-Line Racing 1/10 Ford Bronco R Clear Body (PRO358600) Instruction Manual

1. Informazioni sulla sicurezza

AVVERTIMENTO: Leggere l'INTERO manuale di istruzioni per familiarizzare con le caratteristiche del prodotto prima di utilizzarlo. Il mancato utilizzo corretto del prodotto può causare danni al prodotto stesso, a cose o persone e lesioni gravi. Questo è un prodotto per hobby sofisticato. Deve essere utilizzato con cautela e buon senso e richiede alcune competenze meccaniche di base. Il mancato utilizzo di questo prodotto in modo sicuro e responsabile può causare lesioni o danni al prodotto o ad altre cose. Questo prodotto non è destinato all'uso da parte di bambini senza la diretta supervisione di un adulto. Non utilizzare con componenti incompatibili o modificare questo prodotto in alcun modo al di fuori delle istruzioni fornite da Horizon Hobby, LLC. Il manuale del prodotto contiene istruzioni per la sicurezza, il funzionamento e la manutenzione. È essenziale leggere e seguire tutte le istruzioni e le avvertenze contenute nel manuale prima del montaggio, della configurazione o dell'uso, al fine di utilizzare correttamente il prodotto ed evitare danni o lesioni gravi.

2. Prodotto finitoview

The Pro-Line Racing 1/10 Ford Bronco R Clear Body (PRO358600) is designed for short course remote control trucks. This clear body allows for custom painting and detailing to replicate the Ford Bronco R race prototype. It includes an add-on spoiler and rear cage/taillights for enhanced realism.

Caratteristiche:

• Fully Licensed Ford Bronco R Clear Body
• Transforms your short course truck into an off-road racer
• Based on Ford’s Race Prototype Truck
• Includes add-on spoiler and rear cage/taillights
• Prodotto negli USA

Cosa è incluso:

• Pro-Line Racing 1/10 Ford Bronco R Clear Body: Short Course, PRO358600

3. Impostazione e preparazione

This section outlines the steps for preparing your new clear body for use on your RC vehicle.

3.1 Inspecting the Body

Upon receiving your Pro-Line Ford Bronco R clear body, carefully inspect it for any manufacturing defects or shipping damage.

Image: The clear, unpainted Pro-Line Racing 1/10 Ford Bronco R body as it appears out of the packaging.

3.2 Trimming the Body

Carefully cut along the molded trim lines of the body using sharp hobby scissors or a body reamer. Pay close attention to wheel wells and edges for a clean finish.

3.3 Painting and Detailing

Before painting, clean the inside of the body with mild soap and water, then dry thoroughly. Mask off windows and any areas you do not wish to paint. Apply RC-specific polycarbonate paint to the inside of the body for durability. Allow each coat to dry completely before applying the next.

Image: A fully painted Pro-Line Ford Bronco R body, showcasing the front design and details.

Immagine: Lato A view of the painted Pro-Line Ford Bronco R body, highlighting the profile and wheel arches.

Immagine: La parte posteriore view of the painted Pro-Line Ford Bronco R body, showing the integrated spoiler and taillight details.

3.4 Applying Decals

Once the paint is dry, remove all masking. Apply the included decal sheet to add realistic details such as headlights, taillights, grilles, and sponsor logos. Use a hobby knife for precise placement.

Image: The decal sheet included with the Pro-Line Ford Bronco R body, featuring various logos and details.

3.5 Mounting the Body

Align the body with your short course truck's body posts. Mark and drill holes for the body posts. It is recommended to use extended body mounts for optimal fitment, especially with larger tires. Secure the body using body clips.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a front angle.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a side angle.

Image: The Pro-Line Ford Bronco R body mounted on a remote control short course truck, viewed from a rear angle.

4. Considerazioni operative

The Pro-Line Ford Bronco R body is designed for 1/10 scale short course trucks. Ensure your vehicle's chassis and suspension are compatible with the body's dimensions (20.9"D x 10.3"W x 6.2"H). Proper body mounting prevents interference with moving parts and ensures optimal performance and durability.

Image: Diagram illustrating the dimensions (length, width, height) of the Pro-Line Ford Bronco R body.

5. Manutenzione

To maintain the appearance and longevity of your body, follow these guidelines:

• Pulizia: Pulisci con un annuncioamp cloth after use to remove dirt and debris. Avoid harsh chemicals that may damage the paint or plastic.
• Magazzinaggio: Store the body in a cool, dry place away from direct sunlight to prevent fading or warping.
• Ispezione: Regularly inspect the body for cracks or damage, especially after impacts. Repair minor cracks with appropriate polycarbonate repair tape or adhesive to prevent further damage.

6. Risoluzione Dei Problemi

This section addresses common issues you might encounter with your RC body.

• Body Rubbing Tires: If the body rubs against the tires during suspension travel or steering, check if extended body mounts are needed. Trim wheel wells further if necessary.
• Body Cracking: Polycarbonate bodies can crack upon impact. For minor cracks, use clear polycarbonate repair tape on the inside of the body. For severe damage, replacement may be necessary.
• Decals Peeling: Ensure the body surface was clean and dry before decal application. If peeling occurs, re-apply with a strong adhesive or replace the decal.
• Scarsa compatibilità: Double-check that the body posts are correctly aligned and that the body is designed for your specific short course truck model. Some customization of body post holes may be required.

7. Specifiche

8. Garanzia e supporto

For warranty information or technical support regarding your Pro-Line Racing product, please refer to the official Pro-Line Racing weboppure contatta direttamente il servizio clienti. Conserva la ricevuta d'acquisto come prova d'acquisto.

Visit Pro-Line Racing Official Websito