Bototek Surge Protector with 10 AC Outlets and 4 USB Ports - Instruction Manual

Prodotto finitoview

The Bototek Surge Protector (Model B09QX4TYW4) is designed to provide power and protection for up to 14 electronic devices simultaneously. It features 10 standard AC outlets and 4 USB charging ports, offering a total power capacity of 1875W/15A and 2100 Joules of surge protection. This device is suitable for home, office, and dorm environments.

Image: Bototek Surge Protector, showcasing its 10 AC outlets and 4 USB ports, along with the power switch and indicators.

Caratteristiche principali

• Soluzione di alimentazione 14 in 1: 10 AC outlets (1875W total) and 4 USB high-speed charging ports for simultaneous device powering.
• Protezione avanzata dalle sovratensioni: 3 complementary Surge Protection Circuits (TVS, MOV, GDT) with a minimum energy-absorbing capacity of 2100 Joules. A 'SURGE PROTECTED' indicator light confirms active protection.
• Ricarica USB intelligente: Each USB port delivers up to 5V/2.4A (actual current determined by device demand), with smart technology for optimal charging speed. Compatible with various USB devices, including Kindle.
• Spaziatura delle uscite ottimizzata: Includes 2 widely spaced AC outlets (2 inches) for large adapters, alongside 8 standard outlets.
• Maggiore sicurezza e durata: FCC Certificated. Features a lighted on/off switch with an integrated circuit breaker for overload protection. Constructed with environmental protection and fire-resistance PC shell (flame retardant at 1382℉) for increased durability.
• Cavo di prolunga lungo: Equipped with a 10-foot heavy-duty copper cord for extended reach.
• Design della spina salvaspazio: Features a 45-degree right-angle flat plug that minimizes interference with other wall outlets.
• Design a parete: Includes mounting holes for convenient wall installation.

Image: Visual representation of the surge protector's features, including 4 USB ports, 10 AC outlets, 10ft cable, and ON/OFF switch.

Istruzioni di installazione

1. Disimballare il dispositivo: Carefully remove the Bototek Surge Protector from its packaging.
2. Scegli una posizione: Select a dry indoor location away from heat sources and moisture. Consider using the integrated mounting holes for wall installation if desired.
3. Plug into a Wall Outlet: Insert the 45-degree right-angle flat plug into a standard 3-prong grounded wall outlet. Ensure the plug is fully inserted.


Image: Close-up of the 45-degree right-angle flat plug, designed for space-saving and easy access to wall outlets.

4. Accensione: Press the red ON/OFF switch to the 'ON' position. The 'Protected' and 'Grounded' indicator lights should illuminate, confirming the surge protector is active and properly grounded.
5. Connetti dispositivi: Plug your electronic devices into the available AC outlets and USB ports. Utilize the widely spaced outlets for larger power adapters.


Image: The surge protector mounted on a wall, demonstrating its wall-mounted design and multiple devices plugged in.

Istruzioni per l'uso

• Prese CA: The 10 AC outlets provide power for standard electronic devices. Ensure the total wattage dei dispositivi collegati non supera i 1875W.
• Porte USB: The 4 USB ports are designed for charging smartphones, tablets, and other USB-powered devices. Each port can deliver up to 2.4A.
• Interruttore ON/OFF: Use the red ON/OFF switch to control power to all connected outlets and USB ports.
• Indicatore di protezione da sovratensioni: The 'Protected' indicator light (usually green) confirms that the surge protection circuitry is active and functioning. If this light goes out, the surge protection has been compromised, and the unit should be replaced.
• Indicatore di messa a terra: The 'Grounded' indicator light (usually green) confirms that the wall outlet is properly grounded.

Manutenzione

• Pulizia: Scollegare la ciabatta dalla presa a muro prima di pulirla. Utilizzare un panno asciutto e morbido per pulire l'esterno. Non utilizzare detergenti liquidi o spray.
• Evitare il sovraccarico: Do not exceed the maximum power rating of 1875W/15A. Overloading can cause the circuit breaker to trip or damage the unit and connected devices.
• Ispezione regolare: Periodically check the power strip and its cord for any signs of damage, such as frayed wires, cracks, or loose connections. Discontinue use if damage is found.
• Condizioni ambientali: Use the power strip indoors only. Keep it away from water, excessive heat, and direct sunlight.

Risoluzione dei problemi

• Nessuna alimentazione ai dispositivi:
  • Assicurarsi che l'interruttore ON/OFF della ciabatta sia in posizione 'ON'.
  • Check if the wall outlet is functioning by plugging in another device directly.
  • Verify that the circuit breaker on the power strip has not tripped. If it has, reduce the load and press the reset button (if available, or cycle the ON/OFF switch).
• 'Protected' Indicator Light is Off:
  • This indicates that the surge protection components have absorbed a surge and are no longer providing protection. The power strip will still function as a multi-outlet strip, but your devices are no longer protected from future surges. It is recommended to replace the unit.
• 'Grounded' Indicator Light is Off:
  • This indicates a grounding problem with the wall outlet. Consult a qualified electrician to inspect the wiring.

Specifiche

Image: The 10-foot heavy-duty copper cord providing ample reach for the surge protector.

Garanzia e supporto

Bototek provides a worry-free 24-month warranty for this surge protector. Additionally, lifetime technical support is available with friendly customer service to assist with any product-related inquiries or issues.

For support, please refer to the contact information provided with your product packaging or visit the official Bototek websito.