BRUNO Cube Timer Clock BCA026-WH Instruction Manual

1. Introduzione

Grazie per l'acquistoasing the BRUNO Cube Timer Clock BCA026-WH. This compact and versatile device functions as both a digital clock and a timer, featuring an alarm, snooze, and backlight. Its intuitive design makes it suitable for various settings, from kitchen counters to office desks. Please read this manual carefully to ensure proper use and to maximize the product's lifespan.

Image 1.1: The BRUNO Cube Timer Clock BCA026-WH in white, displaying the time and its control buttons.

2. Impostazione

2.1. Installazione della batteria

The BRUNO Cube Timer Clock requires two AAA batteries (included). Follow these steps to install them:

1. Individuare il coperchio del vano batterie sul retro dell'unità.
2. Per aprire il coperchio, farlo scorrere verso il basso.
3. Inserire due batterie AAA, assicurandosi che la polarità sia corretta (+ e -) come indicato all'interno del vano.
4. Richiudere il coperchio del vano batterie facendolo scorrere verso l'alto finché non scatta in posizione.

Image 2.1: The battery compartment located on the back of the clock, showing where to insert two AAA batteries.

2.2. Impostazione iniziale di data e ora

After installing batteries, the display will show a default time. To set the current time and date:

1. Premere e tenere premuto il tasto Orologio/Data button (usually marked with a clock icon or 'M') to enter setting mode. The hour digits will flash.
2. Utilizzare il + E - pulsanti per regolare l'ora.
3. Premere il tasto Orologio/Data button again to move to minute setting, then adjust with + E -.
4. Continua a premere il pulsante Orologio/Data button to cycle through year, month, and day settings, adjusting each with + E -.
5. Una volta completate tutte le impostazioni, premere il tasto Orologio/Data button one last time or wait a few seconds for the device to exit setting mode automatically.
6. Per passare dalla visualizzazione a 12 ore a quella a 24 ore, premere il tasto + button while the time is displayed in clock mode.

3. Istruzioni per l'uso

3.1. Switching Between Clock and Timer Modes

The device operates in two main modes: Clock Mode and Timer Mode. To switch between them, press the Modalità button (often marked with an hourglass icon).

3.2. Setting and Using the Timer

The Cube Timer Clock features a unique rotary switch for quick timer activation and up to three preset timer patterns.

1. Activating a Preset Timer: The top part of the clock can be rotated. Each side of the top cube may have a number (e.g., 1, 2, 3) corresponding to a preset timer duration. Simply rotate the top cube so the desired preset number faces upwards to start the timer.
2. Setting Custom Timer: In Timer Mode, use the + E - pulsanti per impostare il tempo di conto alla rovescia desiderato.
3. Avvio/Arresto Timer: Premere il tasto Avvio/Arresto button (often integrated with the Mode button or a separate button) to begin or pause the countdown.
4. Allarme timer: When the timer reaches zero, an electronic alarm will sound. Press any button to stop the alarm.

Image 3.1: Setting the timer by rotating the top cube to select a preset duration.

3.3. Setting the Alarm and Snooze

Per impostare la sveglia:

1. In Clock Mode, press and hold the Allarme button (marked with a bell icon) to enter alarm setting mode. The alarm hour digits will flash.
2. Utilizzare il + E - pulsanti per regolare l'ora della sveglia.
3. Premere il tasto Allarme button again to move to minute setting, then adjust with + E -.
4. Premere il tasto Allarme button one last time or wait for the device to exit setting mode.
5. Per attivare/disattivare l'allarme, premere il tasto Allarme brevemente il pulsante. Sul display apparirà/scomparirà un'icona di allarme.

Quando suona la sveglia, premere il tasto Posticipare button (often the top surface of the clock or a dedicated button) to temporarily silence it. The alarm will sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button.

Image 3.2: Setting the alarm time on the clock.

3.4. Funzione di retroilluminazione

The display features a backlight for visibility in low-light conditions. To activate the backlight, press the Leggero button (if available) or briefly press the top surface of the clock. The backlight will illuminate for a few seconds and then turn off automatically.

4. Manutenzione

4.1. Pulizia

To clean your BRUNO Cube Timer Clock:

• Pulisci l'esterno con un panno morbido e asciutto.
• Per segni ostinati, leggermente dampInumidire il panno con acqua e un detergente delicato, quindi asciugarlo immediatamente.
• Non utilizzare detergenti abrasivi, solventi o immergere il dispositivo in acqua.

4.2. Sostituzione della batteria

When the display becomes dim or the functions stop working correctly, it's time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both batteries at the same time with new ones of the same type (AAA).

5. Risoluzione Dei Problemi

6. Specifiche

• Modello: BCA026-WH
• Dimensioni: L58 x A78 x P58 mm
• Peso: Circa 100 g
• Fonte di energia: Batterie AAA x 2
• Funzioni: Timer, 12/24 hour display, Date display, Electronic alarm, Snooze, Backlight
• Materiale: ABS resin (main body)
• Paese di origine: Cina

7. Warranty Information & Support

7.1. Garanzia

This BRUNO product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BRUNO websito.

7.2. Assistenza clienti

If you encounter any issues or have questions regarding your BRUNO Cube Timer Clock that are not addressed in this manual, please contact BRUNO customer support. Contact information can typically be found on the product packaging, the official BRUNO websito o tramite il tuo rivenditore.