Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply User Manual

1. Introduzione

This manual provides essential information for the safe and efficient use of your Phanteks Revolt SFX 750W 80 PLUS Platinum power supply. This power supply is designed for small form-factor (SFX) chassis, offering high efficiency and a fully modular design for optimized cable management and system stability.

Image 1: Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply. This image shows the compact black power supply unit with its fan grille visible.

2. Informazioni sulla sicurezza

WARNING: Improper installation or use can result in serious injury or damage to your system components. Always follow these safety guidelines:

• Prima di procedere all'installazione o alla manutenzione, assicurarsi che l'alimentazione sia scollegata dalla presa di corrente CA.
• Non aprire l'alimentatore. Alto volumetagsono presenti all'interno, anche quando sono scollegati.
• Installare l'alimentatore in un'area ben ventilata. Non ostruire la ventola o le aperture di ventilazione.
• Use only the modular cables provided with this power supply. Using incompatible cables can cause damage.
• Assicurare una corretta messa a terra del sistema informatico.
• Evitare di esporre l'alimentatore a umidità o temperature estreme.

3. Contenuto della confezione

Verificare che tutti i componenti siano presenti nella confezione:

• Phanteks Revolt SFX 750W 80 PLUS Platinum Power Supply Unit
• Cavo di alimentazione CA
• Modular Cable Set, including:
  • 1x 24-pin ATX Motherboard Cable (18+10pin to 24pin)
  • 4x 8-pin CPU/PCI-E Cables (8pin to CPU 8pin / PCI-E 8pin)
  • 3x 6-pin SATA/Molex Cables (6pin to SATA/Molex)
• Viti di montaggio
• Manuale dell'utente (questo documento)

Note: The modular cables are flat ribbon cables designed for flexibility and ease of routing in compact chassis.

4. Configurazione e installazione

Follow these steps to install your Phanteks Revolt SFX power supply:

1. Prepare Your Chassis: Ensure your computer chassis supports the SFX form factor. Remove any existing power supply.
2. Montare l'alimentatore: Carefully slide the Phanteks Revolt SFX PSU into the designated SFX power supply bay in your chassis. Secure it using the provided mounting screws.
3. Collegare i cavi modulari:
   • Cavo della scheda madre ATX a 24 pin: Connect the 18+10pin end to the power supply and the 24-pin end to your motherboard.
   • CPU Power Cables: Connect the 8-pin end(s) to the power supply and the 4+4pin or 8-pin end(s) to your motherboard's CPU power connector(s).
   • Cavi di alimentazione PCI-E: Connect the 8-pin end(s) to the power supply and the 6+2pin or 8-pin end(s) to your graphics card(s).
   • SATA/Molex Cables: Connect the 6-pin end(s) to the power supply and the SATA or Molex connectors to your storage drives and other peripherals.

   Ensure all cable connections are firm and properly seated. Utilize the flexibility of the flat ribbon cables for optimal routing and airflow within your chassis.

4. Collegare l'alimentazione CA: Once all internal connections are made, connect the AC power cord to the power supply's AC inlet and then to a wall outlet or surge protector.
5. Accensione: Flip the power switch on the back of the PSU to the 'ON' position. You can now power on your computer system.

5. Istruzioni per l'uso

The Phanteks Revolt SFX 750W power supply is designed for reliable and efficient operation.

• 80 PLUS Platinum Efficiency: This power supply is certified 80 PLUS Platinum, ensuring high energy efficiency (up to 92% at 50% system load). This reduces heat generation and operating costs.
• Silent Fan Operation: The integrated 92mm Fluid Dynamic Bearing (FDB) fan features intelligent thermal control. It operates silently and optimizes cooling performance based on load.
• Modalità 0 giri/min: For ultimate silence, the fan will remain off when the system load is below 30%. This is normal operation. The fan will automatically activate as the load increases.
• Caratteristiche di protezione: The PSU includes multiple protection circuits to safeguard your components:
  • Polizia provinciale (Overpower Protection)
  • Originale (oltre il voltage Protezione)
  • UVP (Sotto Voltage Protezione)
  • SCP (Protezione da cortocircuito)
  • OCP (Protezione da sovracorrente)
  • OTP (Protezione da sovratemperatura)
  • No-Load Protection
  • Ripristina protezione

6. Manutenzione

Per garantire prestazioni ottimali e longevità del tuo alimentatore, tieni presente i seguenti suggerimenti per la manutenzione:

• Rimozione della polvere: Periodically clean dust from the power supply's fan grille and ventilation openings using compressed air. Ensure the PSU is powered off and disconnected from AC power before cleaning.
• Condizioni ambientali: Operate the power supply within the specified temperature and humidity ranges (Operating Temp: 0 to 50°C; Operating Humidity: Up to 85% relative humidity, non-condensing).
• Gestione dei cavi: Ensure cables are routed neatly to prevent obstruction of airflow within the chassis.

7. Risoluzione Dei Problemi

Se riscontri problemi con l'alimentatore, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:

• Nessun potere:
  • Verificare che il cavo di alimentazione CA sia collegato saldamente sia all'alimentatore che alla presa a muro.
  • Assicurarsi che l'interruttore di alimentazione sul retro dell'alimentatore sia in posizione "ON".
  • Verificare che la presa a muro funzioni testandola con un altro dispositivo.
  • Confirm all modular cables (especially the 24-pin motherboard cable) are firmly seated at both the PSU and component ends.
• Instabilità/arresti anomali del sistema:
  • Assicuratevi che i requisiti di alimentazione del vostro sistema non superino la capacità di 750 W dell'alimentatore.
  • Check for loose cable connections, particularly to the motherboard, CPU, and graphics card.
  • Verify that the PSU's ventilation is not obstructed, leading to overheating. The built-in OTP (Over Temperature Protection) may shut down the unit if it overheats.
• La ventola non gira:
  • The PSU features a 0 RPM mode. The fan will not spin if the system load is below 30%. This is normal operation.
  • If the system is under significant load and the fan is still not spinning, ensure there are no obstructions to the fan blades.

If problems persist after following these steps, contact Phanteks customer support for further assistance.

8. Specifiche

9. Garanzia e supporto

Garanzia: This Phanteks Revolt SFX 750W 80 PLUS Platinum power supply is covered by a Garanzia del produttore di 1 anni dalla data di acquisto. Conservare la prova d'acquisto per eventuali reclami in garanzia.

The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, abuse, misuse, natural disaster, or unauthorized modification.

Assistenza clienti: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Phanteks websito o contattare direttamente il servizio clienti.

Phanteks Ufficiale Websito: www.phanteks.com