Nady D-450-LT Quad Receiver 200-Channel Digital Wireless Lapel Microphone System User Manual

Introduzione

The Nady D-450-LT is a multi-channel digital wireless system designed for professional audio applications. This system features a rack-mountable quad receiver and four all-metal bodypack transmitters with OML-4 lapel microphones. It offers 200 selectable channels (50 per receiver/transmitter pair) and utilizes DQPSK digital modulation for reliable, interference-free operation with a range exceeding 300 feet line-of-sight. This manual provides essential information for setting up, operating, and maintaining your D-450-LT system.

Contenuto della confezione

Verifica che tutti i componenti siano presenti nel tuo pacchetto:

• 1 x Nady D-450 Quad Receiver
• 4 x Nady LT-450A Bodypack Transmitters
• 4 x Nady OML-4 Lapel Microphones
• Adattatore di alimentazione
• Antenne
• Audio Cables (XLR and 1/4" sum output)
• Manuale dell'utente (questo documento)

Image: The complete Nady D-450-LT system, showing the quad receiver, four bodypack transmitters, and four lapel microphones.

Caratteristiche principali

• Reliable long-range operation (greater than 300 feet line-of-sight).
• 200 (50x4) selectable frequencies in the 500 MHz band for interference-free operation.
• 48 kHz/24 bit analog to digital conversion technology for exceptional audio clarity.
• DQPSK Digital transmission virtually eliminates interference and noise.
• All-metal bodypacks and receiver for durability.
• Four individual XLR outputs and one sum 1/4" output.

Guida all'installazione

1. Posizionamento e connessioni del ricevitore

Position the D-450 receiver in a location that provides a clear line-of-sight to the intended area of use for the transmitters. Avoid placing it near large metal objects or other wireless devices that could cause interference.

1. Collegare le antenne: Screw the four included antennas onto the antenna jacks on the front panel of the receiver. Ensure they are securely tightened and positioned vertically for optimal reception.
2. Collegamento elettrico: Connect the supplied power adapter to the DC 12V input jack on the rear panel of the receiver and then plug it into an AC power outlet.
3. Uscita audio:
   • For individual channel outputs, connect XLR cables from the "BAL MIC OUT 1-4" jacks on the rear panel to your mixer or audio interface.
   • For a mixed output of all four channels, connect a 1/4" TS cable from the "UNBAL LINE SUM OUT" jack to your mixer or audio interface.

Immagine: Frontale view of the Nady D-450 receiver, showing the antenna connections and channel displays.

Immagine: Posteriore view of the Nady D-450 receiver, highlighting the individual XLR microphone-level outputs and the unbalanced 1/4" line-level sum output.

2. Configurazione del trasmettitore bodypack

1. Installa le batterie: Open the battery compartment on the LT-450A bodypack transmitter. Insert two AA batteries, ensuring correct polarity. Close the compartment securely.
2. Connect Lapel Microphone: Plug the OML-4 lapel microphone into the input jack on the top of the bodypack transmitter. Secure the microphone to clothing, approximately 6-8 inches from the mouth, for optimal sound capture.

Image: Nady LT-450B bodypack transmitter with the battery compartment open, showing where to insert AA batteries.

Image: Nady LT-450A bodypack transmitter with an OML-4 lapel microphone connected, ready for use.

Istruzioni per l'uso

1. Accensione/Spegnimento

• Ricevitore: Press the "POWER" button on the front panel of the D-450 receiver. The display will illuminate.
• Trasmettitore: Press and hold the power button on the LT-450A bodypack transmitter until the display illuminates.

2. Channel Pairing (IR Sync)

The D-450-LT system uses infrared (IR) synchronization for easy pairing between the receiver and transmitters.

1. Select Channel on Receiver: On the D-450 receiver, use the "UP/DOWN" buttons for the desired channel (CH1, CH2, CH3, or CH4) to select a frequency. You can also long-press the "SET" button (2 seconds) to initiate an auto-scan for available frequencies.
2. Initiate IR Sync: Once a frequency is selected on the receiver, press the "MODE" button for that channel. The IR window on the receiver will flash.
3. Sync Transmitter: Hold the bodypack transmitter with its IR window facing the receiver's IR window, approximately 6-12 inches away. The transmitter will synchronize with the receiver's selected frequency. A successful sync will be indicated by the transmitter display showing the same channel and frequency as the receiver, and the RF indicator on the receiver illuminating.

3. Controllo del volume

Adjust the individual channel volume on the D-450 receiver using the dedicated volume controls for each channel. Start with a low volume and gradually increase it to prevent feedback or distortion.

4. Using the Lapel Microphones

Ensure the lapel microphone is securely clipped to the user's clothing, ideally on the lapel or collar, about 6-8 inches below the chin. This placement helps capture clear audio while minimizing clothing noise.

Manutenzione

• Pulizia: Use a soft, dry cloth to clean the receiver and transmitters. Avoid liquid cleaners or solvents.
• Sostituzione della batteria: Replace AA batteries in the bodypack transmitters when the low battery indicator appears on the display. Remove batteries if the system will not be used for an extended period.
• Magazzinaggio: Conservare il sistema in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• antenne: Maneggiare le antenne con cura per evitare piegature o rotture.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

For detailed warranty information, technical support, or service inquiries, please refer to the official Nady Systems website or contact their customer service directly. This manual does not contain specific warranty terms or contact information.