Bestway Flowclear Cartridge Filter Pump User Manual

1. Introduzione

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Bestway Flowclear Cartridge Filter Pump. This pump is designed to circulate and filter water in above-ground swimming pools, helping to maintain clean and clear water. The 1500 GPH (Gallons Per Hour) pump is recommended for use with pools ranging from 300 to 8,400 gallons and utilizes Type III-A/C filter cartridges.

Immagine 1.1: Passoview of the Bestway Flowclear Cartridge Filter Pump.

2. Importanti istruzioni di sicurezza

WARNING: Read and follow all instructions carefully before installing and using this product. Failure to do so can result in serious injury or death.

• Always disconnect the pump from the electrical outlet before servicing or cleaning.
• The pump must be supplied by a ground-fault circuit interrupter (GFCI) or residual current device (RCD) with a rated tripping current not exceeding 30 mA.
• Do not bury the electrical cord. Locate cord to minimize abuse from lawnmowers, hedge trimmers, and other equipment.
• Per ridurre il rischio di scosse elettriche, non utilizzare una prolunga per collegare l'unità alla rete elettrica. Utilizzare una presa di corrente posizionata correttamente.
• Non utilizzare la pompa se il cavo di alimentazione o la spina sono danneggiati.
• Never operate the pump when the pool is occupied.
• Questo apparecchio può essere utilizzato da bambini di età pari o superiore a 8 anni e da persone con capacità fisiche, sensoriali o mentali ridotte o prive di esperienza e conoscenza, solo se sorvegliati o istruiti sull'uso sicuro dell'apparecchio e se comprendono i pericoli connessi.

3. Contenuto della confezione

Ensure all components listed below are present in your package. If any parts are missing or damaged, do not attempt to assemble or operate the pump. Contact Bestway customer support for assistance.

• Unità pompa filtro
• Cartuccia del filtro (tipo III-A/C)
• Hoses (typically two)
• Tubo flessibileamps
• Inlet and Outlet Strainers/Grates
• Manuale di istruzioni

Image 3.1: Inlet and outlet grates for the filter pump.

4. Montaggio e installazione

Follow these steps for proper assembly and installation of your filter pump. Refer to your pool's specific instructions for connecting the hoses to the pool's inlet and outlet ports.

1. Posizionare la pompa: Place the filter pump on a solid, level surface, at least 2 meters (6.5 feet) away from the pool edge. Ensure the pump is lower than the pool's water level.
2. Collegare i tubi: Attach one hose from the pump's inlet port (marked with a minus sign or 'IN') to the pool's water outlet (suction) port. Attach the second hose from the pump's outlet port (marked with a plus sign or 'OUT') to the pool's water inlet (return) port. Secure all hose connections with clamps.
3. Install Strainers: Insert the inlet and outlet strainers into the corresponding ports inside the pool.
4. Assicurare il flusso dell'acqua: Open any valves or plugs on the pool's inlet and outlet ports to allow water to flow into the pump. The pump housing should fill with water.
5. Aria di spurgo: Loosen the air release valve on top of the filter pump housing until water starts to flow out. Close the valve once all air has escaped.
6. Collegamento elettrico: Plug the pump into a properly grounded electrical outlet protected by a GFCI/RCD.

5. Funzionamento

The Bestway Flowclear filter pump is designed for ease of use, featuring an energy-saving plug with a built-in timer for customizable operation.

1. Avvio della pompa: After ensuring proper installation and water flow, plug the pump into the electrical outlet. The pump will begin to operate.
2. Impostazione del timer: The energy-saving plug allows you to set the pump to run for a specific duration, up to 10 hours. Consult the instructions provided with the plug for detailed timer setting procedures. This feature helps optimize filtration cycles and energy consumption.
3. Attività giornaliera: For optimal water clarity, operate the filter pump daily. The duration of operation depends on pool size, bather load, and environmental conditions. A general guideline is to run the pump for at least 8-10 hours per day.
4. Arresto della pompa: Per spegnere la pompa è sufficiente staccarla dalla presa elettrica.

6. Manutenzione

Regular maintenance of your filter pump is crucial for its longevity and for maintaining clean pool water. The primary maintenance task involves cleaning or replacing the filter cartridge.

1. Scollegare l'alimentazione: Prima di effettuare qualsiasi intervento di manutenzione, scollegare sempre la pompa filtro dalla presa elettrica.
2. Chiudere le valvole: Close the pool's inlet and outlet valves (if applicable) to prevent water from flowing out of the pool.
3. Remove Filter Housing Lid: Unscrew the collar retainer and remove the filter housing lid.
4. Rimuovere la cartuccia: Carefully remove the used Type III-A/C filter cartridge from the pump housing.
5. Pulisci o sostituisci:
   • Pulizia: Rinse the filter cartridge thoroughly with a garden hose to remove debris. If the cartridge remains dirty or discolored after rinsing, it should be replaced.
   • Sostituzione: Install a new Bestway Type III-A/C filter cartridge into the pump housing.
6. Rimontare: Place the filter housing lid back on and tighten the collar retainer securely.
7. Ripristina alimentazione: Open the pool's valves, bleed any air from the pump (as described in Section 4), and plug the pump back into the electrical outlet.

It is recommended to clean the filter cartridge every few days and replace it every 2-4 weeks, depending on pool usage and water conditions.

Image 6.1: Demonstrating the replacement of a filter cartridge.

7. Conservazione

When the swimming season ends or if the pump will not be used for an extended period, follow these steps for proper storage:

1. Scollegare la pompa dall'alimentazione.
2. Disconnect all hoses from the pump and the pool.
3. Remove the filter cartridge and discard it.
4. Drain all water from the pump housing.
5. Clean and dry all components thoroughly.
6. Store the pump and accessories in a dry, temperature-controlled location, away from direct sunlight and extreme temperatures.

8. Risoluzione Dei Problemi

Se riscontri problemi con la pompa del filtro, fai riferimento ai seguenti problemi comuni e alle relative soluzioni:

9. Specifiche

Detailed technical specifications for the Bestway Flowclear Cartridge Filter Pump Model 58389.

• Marca: Il migliore modo
• Numero modello: 58389
• Codice UPC: 821808045648
• Portata massima: 1500 galloni all'ora (GPH)
• Voltage: 120 Volt
• Fonte di energia: Elettrico
• Materiale: Plastica
• Colore: Clear (housing may appear grey/blue)
• Dimensioni del prodotto (L x P x A): 25.4L x 25.4W x 25.4H Centimetres (approximately 10 x 10 x 10 inches)
• Peso dell'articolo: 6.38 kg (circa 14.07 libbre)
• Cartuccia filtro compatibile: Tipo III-A/C
• Volume della piscina consigliato: 300-8,400 galloni

Image 9.1: Bestway Flowclear Filter Pump with key dimensions.

10. Assistenza clienti

For further assistance, warranty information, or to purchase replacement parts, please contact Bestway customer support. Refer to the contact information provided on the product packaging or visit the official Bestway websito.

Websito: www.bestwaycorp.com

Please have your model number (58389) and UPC (821808045648) available when contacting support.