Sunco Lighting DL_DK56-15W-3K_65K-12PK

Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

Model: DL_DK56-15W-3K_65K-12PK

1. Introduzione

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. Informazioni sulla sicurezza

AVVERTIMENTO: Rischio di scossa elettrica. Scollegare l'alimentazione dal fusibile o dall'interruttore automatico prima dell'installazione o della manutenzione.
L'installazione deve essere eseguita da un elettricista qualificato, nel rispetto delle normative elettriche nazionali e locali.
Non modificare o alterare l'apparecchio.
Garantire la fornitura voltage è compatibile con i requisiti dell'apparecchio (120 Volt).
Do not handle live wires with bare hands.
Questo prodotto è Damp Valutato, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. Cosa c'è nella scatola

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

LED Disc Light Fixture (12 units per pack)
Connettore TP24
adattatore E26
Spring Clips (pre-attached or included for installation)
Dadi a filo
Viti di montaggio
Manuale di istruzioni

Esploso view of Sunco LED Disc Light components including friction springs, screws, LED board, and anti-yellowing lens. — **Figura 1:** Esploso view of the LED Disc Light showing its components: friction springs, included screws, energy-saving LED board, and anti-yellowing lens.

4. Istruzioni per l'installazione

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. Strumenti richiesti

Cacciavite
Wire Strippers (if connecting to junction box)
Occhiali di sicurezza

4.2. Recessed Can Installation (5-inch or 6-inch)

Spegnere l'alimentazione: Ensure power to the fixture is OFF at the circuit breaker.
Rimuovere la finitura esistente: Carefully remove the existing bulb and trim from the recessed can.
Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
Inserire l'attrezzatura: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

Diagram showing installation of Sunco LED Disc Light into a recessed can with TP24 connection and adjustable spring clips. — **Figura 2:** Illustration of the LED Disc Light installation into a recessed can, highlighting the TP24 connector and adjustable spring clips for 5-6 inch cans.

4.3. Installazione della scatola di giunzione

Spegnere l'alimentazione: Ensure power to the junction box is OFF at the circuit breaker.
Prepare wires: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
Collegare i fili: Use the provided wire nuts to connect the corresponding wires:
- Black fixture wire to Black junction box wire.
- White fixture wire to White junction box wire.
- Green/Yellow fixture wire to Green/Bare Copper junction box wire.
Secure fixture: Use the provided mounting screws to attach the disc light's base directly to the junction box.
Fissare il diffusore: Twist the diffuser onto the fixture base until securely fastened.

Image showing the three ways to install the Sunco LED Disc Light: into a J-Box with wire nuts, or into an E26 can connection. — **Figura 3:** Visual guide for installing the LED Disc Light, including options for J-Box and E26 can connections.

1 video: Sopraview of Sunco 5/6-inch LED Disc Light installation, demonstrating both recessed can and junction box methods.

5. Istruzioni per l'uso

5.1. Accensione/spegnimento

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Selectable Color Temperature (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

Close-up of the CCT selection switch on the back of the LED Disc Light. — **Figura 4:** The CCT switch allows selection of various color temperatures.

2 video: Demonstration of the selectable color temperature feature on the Sunco 6-inch LED Disc Light.

5.3. Funzionalità di oscuramento

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

Image illustrating the dimming range of the LED Disc Light from 10% to 100% with a dimmer switch. — **Figura 5:** The LED Disc Light supports dimming from 10% to 100% with compatible dimmers.

Dimmer compatibili:

Marca	Modello	Marca	Modello
LUTRON	MACL-153M	LUTRON	NLV-1000-LA
LUTRON	DVCL-153P	LUTRON	SLV-600P
LUTRON	PD-6WCL-WH-P	LUTRON	RRD-6CL
LUTRON	MACL-153MH	LUTRON	AYCL-153P
LUTRON	TGCL-153P	LUTRON	P-PKG1WB
LUTRON	DVCL-15PR	LEVITON	6674 600W
LUTRON	CTCL-153PDH	LEVITON	6672 600W
LUTRON	P-PKG1W	LEVITON	IPL06W
LUTRON	DVELV-300P	LEVITON	Modello DW6HD-1BZ
LEVITON	DSL06-001-1LZ	LEVITON	RHCL453PW
LEVITON	IPL06-011-10Z	Mangiare	SAL06P3
LEVITON	06674-002-10W	WEMO	F7C05
LEVITON	TSM10-012-1LW	Collegamento TP	KASA SMART HS220
LEVITON	RDL06-001-10Z	WATTSTOPPER	DCD267
LEVITON	DSE06-001-10Z	CLOUD BAY	CBLD001WH
LEVITON	DDMX1-011-BLZ
LEVITON	DDE06-BLZ 600W
LEVITON	SICURAMENTE

6. Manutenzione

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

Pulizia: Assicurarsi che l'alimentazione sia spenta prima di pulire. Pulire l'apparecchio con un panno morbido e asciutto.amp panno. Non usare detergenti abrasivi o solventi.
Sostituzione della lampadina: This fixture uses integrated LEDs and does not require bulb replacement.

7. Risoluzione Dei Problemi

Problema	Possibile causa	Soluzione
La luce non si accende.	Nessuna alimentazione al dispositivo. Collegamento del cablaggio allentato. Interruttore difettoso.	Controllare l'interruttore. Verificare che tutti i collegamenti dei cavi siano sicuri. Testare o sostituire l'interruttore.
La luce tremola o si attenua inaspettatamente.	Interruttore dimmer incompatibile. Cablaggio allentato. Voltage fluttuazioni.	Ensure dimmer is on the compatible list. Controllare e fissare tutti i collegamenti dei cavi. Consultare un elettricista per il volumetage problemi.
Temperatura del colore errata.	L'interruttore CCT è impostato in modo errato.	Adjust the CCT switch on the back of the fixture to the desired setting.

8. Specifiche

Caratteristica	Dettaglio
Marca	Illuminazione Sunco
Numero di modello	DL_DK56-15W-3K_65K-12PK
Misurare	6 pollici
Cosatage	15 W (equivalente a 75 W)
Luminosità	1050 lumen
Temperatura del colore (CCT)	Selezionabile: 3000K, 4000K, 5000K, 6000K, 6500K
Dimmerabile	Sì (10%-100%)
Voltage	120 Volt
CRI	90+
Vita media	50,000 ore
Materiale	Alluminio, Policarbonato
Tipo di installazione	Flush Mount, Recessed (E26/TP24)
Damp Valutato	SÌ
Certificazioni	ETL
Dimensioni del prodotto	7.5 cm L x 1 cm P x 7.5 cm A
Peso dell'articolo	7.8 libbre (per confezione da 12)

9. Garanzia e supporto

Sunco Lighting offers a Protezione di 7 anno warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Negozio di illuminazione Sunco per ulteriori informazioni.

Image showing Sunco's 7-year coverage and reliable customer support. — **Figura 6:** Sunco Lighting provides 7-year coverage and dedicated customer support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.