Brilliant 1000134854

Brilliant Dody Outdoor Wall Light with Motion Detector - Instruction Manual

Informazioni importanti sulla sicurezza

Please read this instruction manual carefully before installing or operating your Brilliant Dody Outdoor Wall Light. Keep this manual for future reference. Improper installation or use can lead to electric shock, fire, or other hazards.

  • Assicurarsi che l'alimentazione sia scollegata prima dell'installazione, della manutenzione o della sostituzione della lampadina.
  • In caso di dubbi sul cablaggio elettrico, l'installazione deve essere eseguita da un elettricista qualificato.
  • This product is designed for outdoor use with an IP44 rating, providing protection against splashing water.
  • Non superare il limite massimo di wattage specificato per la lampadina.

Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

  • 1 x Brilliant Dody Outdoor Wall Light fixture
  • Materiale di montaggio (viti, tasselli)
  • Manuale di istruzioni

Nota: La lampadina E27 non è inclusa e deve essere acquistata separatamente.

Configurazione e installazione

  1. Preparare l'area di installazione: Choose a suitable wall location for mounting. The recommended mounting height for optimal motion detection is 1.8 meters. Ensure the power supply to the installation area is switched off at the main circuit breaker.
  2. Segnare i punti di foratura: Hold the light fixture against the wall at the desired mounting height. Mark the positions for the drilling holes using a pencil.
  3. Fori di perforazione: Drill holes at the marked positions. Insert the provided wall plugs into the drilled holes.
  4. Collegare il cablaggio: Carefully connect the electrical wires from your mains supply to the terminal block inside the light fixture. Ensure correct polarity (Live, Neutral, Earth). If you are unsure, consult a qualified electrician.
  5. Montare l'apparecchio: Secure the light fixture to the wall using the provided screws. Ensure it is firmly attached.
  6. Installa la lampadina: Insert an E27 bulb (max 20W, LED compatible) into the lamp holder. Ensure the bulb is securely screwed in.
Brilliant Dody Outdoor Wall Light, front view

Immagine: Frontale view of the Brilliant Dody Outdoor Wall Light, showing its sleek black and white design. This image illustrates the overall appearance of the fixture before installation.

Superiore view of the Brilliant Dody Outdoor Wall Light

Image: Close-up of the top section of the Brilliant Dody Outdoor Wall Light, highlighting the white diffuser and black trim. This view helps in understanding the bulb housing area.

Istruzioni per l'uso

The Brilliant Dody Outdoor Wall Light features an integrated motion detector for automatic operation. After installation, restore power to the fixture.

Motion Detector Settings:

The motion sensor has adjustable settings for 'TIME' and 'LUX'. These controls are typically located on the sensor unit itself.

Close-up of the motion sensor and adjustment dials on the Brilliant Dody Outdoor Wall Light

Immagine: dettagliata view of the motion sensor and its adjustment dials (TIME and LUX) on the Brilliant Dody Outdoor Wall Light. This image shows where to find and adjust the sensor settings.

  • TEMPO: This dial controls how long the light remains on after motion is detected and no further motion is sensed. Rotate the dial to increase or decrease the duration.
  • LUSSO: This dial determines the ambient light level at which the sensor becomes active. Rotate towards the sun icon for the sensor to activate in brighter conditions (daytime), or towards the moon icon for it to activate only in darker conditions (nighttime).

Area di rilevamento:

  • Angolo di rilevamento: 120°
  • Campo di rilevamento: Up to 8 meters on both sides, with a maximum detection range of 10 meters.
  • Altezza di montaggio ottimale: 1.8 meters for best performance.

Manutenzione

  • Pulizia: Per pulire l'apparecchio, assicurarsi che l'alimentazione sia spenta. Pulire con un panno morbido e asciutto.amp cloth. Do not use abrasive cleaners or solvents, as these can damage the stainless steel finish or plastic diffuser.
  • Sostituzione della lampadina: Before replacing the bulb, ensure the power supply is disconnected. Allow the old bulb to cool down completely. Unscrew the old E27 bulb and replace it with a new E27 bulb (max 20W, LED compatible).
  • Ispezione: Ispezionare periodicamente l'apparecchio per verificare la presenza di eventuali segni di danni, collegamenti allentati o usura.

Risoluzione dei problemi

ProblemaPossibile causaSoluzione
La luce non si accende.Nessuna alimentazione elettrica.
Lampadina difettosa.
Impostazione LUX errata.
Controllare l'interruttore.
Sostituire la lampadina.
Adjust LUX dial towards the moon icon for darker conditions.
La luce rimane costantemente accesa.Rilevato movimento costante.
Impostazione ORA errata.
Ensure no objects are constantly moving in the detection zone.
Regolare la manopola TIME su una durata più breve.
Il sensore di movimento non rileva.Ostruzione nel percorso di rilevamento.
Impostazione LUX errata.
Sensore sporco.
Rimuovere eventuali ostacoli.
Adjust LUX dial towards the sun icon for brighter conditions, or ensure it's not set too low for current ambient light.
Pulire delicatamente la lente del sensore.

Specifiche del prodotto

  • Marca: Brillante
  • Numero modello: 1000134854
  • ASIN: B0B11KYHSW
  • Dimensioni (L x P x A): Dimensioni: 17 x 7.6 x 40 cm
  • Peso: 490 grammi
  • Materiale: Acciaio inossidabile
  • Materiale ombra: Plastica
  • Colore: Nero
  • Tipo di lampadina: E27 (lampadina non inclusa)
  • Max Wattage: 20W (LED compatible)
  • Numero di lampadine: 1
  • Fonte di energia: Cavo elettrico
  • Tipo di installazione: Montaggio a parete
  • Caratteristica speciale: Rilevatore di movimento
  • Grado di protezione IP: IP44 (Protezione contro gli spruzzi d'acqua)
  • Motion Detector Angle: 120°
  • Motion Detector Range: Up to 8m (both sides), max 10m
  • Altezza di montaggio ottimale: 1.8 metri

Garanzia e supporto

Information regarding specific warranty terms and customer support for Brilliant products may vary by region and retailer. Please refer to the documentation provided at the time of purchase or visit the official Brilliant websito per informazioni dettagliate sulla garanzia e contatti di supporto.

For technical assistance or inquiries, please contact Brilliant customer service through their official channels.

© 2023 Brilliant. Tutti i diritti riservati.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.