Ecolight LED Battery-Operated Bar Light Instruction Manual

1. Introduzione

This manual provides instructions for the installation, operation, and maintenance of your Ecolight LED Battery-Operated Bar Light. This versatile 9-inch LED light offers both 4000K bright white and RGB color-changing options, controlled by tapping the light or using the included infrared (IR) remote control. It is designed for various indoor applications such as under cabinets, in laundry rooms, living rooms, utility areas, or closets.

Cosa è incluso:

• Ecolight LED Bar Light
• Telecomando a infrarossi (IR)
• 6 batterie AA
• Command Strips by 3M for damage-free mounting
• Viti di montaggio

Figure 1: Ecolight LED Bar Light with remote and mounting accessories.

2. Informazioni sulla sicurezza

• Leggere tutte le istruzioni prima dell'installazione e dell'uso.
• Questo prodotto è destinato esclusivamente all'uso in ambienti interni. Non esporre all'acqua o a umidità elevata.
• Non mischiare batterie vecchie e nuove. Non mischiare batterie alcaline, standard (zinco-carbone) o ricaricabili (nichel-cadmio).
• Rimuovere le batterie se la luce non verrà utilizzata per un periodo prolungato.
• Tenere le batterie fuori dalla portata dei bambini.
• Non fissare direttamente la sorgente luminosa a LED.

3. Impostazione

3.1 Installazione della batteria

1. Remove the back battery compartment cover by sliding it off.
2. Inserire le 6 batterie AA, assicurandosi che la polarità (+/-) sia corretta, come indicato all'interno del vano.
3. Riposizionare il coperchio del vano batterie.

Figure 2: Installing AA batteries into the light bar.

3.2 Opzioni di montaggio

The Ecolight LED Bar Light can be mounted using either the included Command Strips for damage-free installation or screws for a permanent fixture.

Using Command Strips (Damage-Free Mounting):

1. Clean the desired mounting surface with rubbing alcohol and let it dry completely.
2. Separate the Command Strips. Remove the red liner from one side of each strip and press it firmly onto the back of the light bar.
3. Remove the black liners from the exposed side of the Command Strips.
4. Position the light bar on the cleaned surface and press firmly for 30 seconds.
5. To remove, gently slide the light bar off the mounted base. Then, slowly stretch each strip downwards against the surface until it releases.

Figure 3: Attaching Command Strips to the light bar for mounting.

Using Screws (Permanent Mounting):

1. Mark the desired screw locations on your mounting surface using the keyhole slots on the back of the light bar as a guide.
2. Se necessario, praticare dei fori pilota.
3. Insert the included screws into the pilot holes, leaving a small gap between the screw head and the surface.
4. Align the keyhole slots on the back of the light bar with the screw heads and slide the light into place until secure.

3.3 Video di installazione

Video 1: Detailed instructions for installing and removing the Ecolight LED Bar Light using Command Strips.

4. Istruzioni per l'uso

4.1 Tap Control

The light bar features a tap-on/off activation directly on its lens:

• Tocca una volta: Activates bright white light (4000K).
• Tocca due volte: Initiates continuous RGB color cycling.
• Tocca tre volte: Sets the light to the currently displayed RGB color.
• Tocca quattro volte: Spegne la luce.

Figure 4: Tap activation on the light bar lens.

4.2 Funzioni del telecomando

The included IR remote control provides comprehensive control over the light bar's features:

• ACCESO/SPENTO: Accende o spegne la luce.
• GUIDATO: Activates continuous RGB color cycling.
• Bianco: Activates 4000K bright white light.
• +/- (Luminosità): Adjusts the brightness level (dimmable).
• Pulsanti R, G, B: Selects specific Red, Green, or Blue colors.
• Ruota dei colori: Allows selection of various colors within the RGB spectrum.
• IMPOSTATO: Confirms a selected color from the color wheel.
• Timer (5, 15, 30, 60 minutes): Sets an auto-off timer for the specified duration.

Figure 5: Remote control for the LED Bar Light.

Figura 6: Esamples of RGB color output from the light bar.

5. Manutenzione

5.1 Sostituzione della batteria

When the light output diminishes or the light stops functioning, it's time to replace the batteries. The easy battery change compartment allows you to slide the light out without removing the mounting strips (if used).

1. If mounted with Command Strips, gently slide the light bar off its mounted base.
2. Rimuovere il coperchio posteriore del vano batteria.
3. Replace all 6 AA batteries with new ones, observing correct polarity.
4. Replace the battery compartment cover and reattach the light bar to its base (if applicable).

5.2 Pulizia

To clean the light bar, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6. Risoluzione Dei Problemi

7. Specifiche

• Numero modello: BO1307-RGB-09LF1-E
• Tipo di sorgente luminosa: GUIDATO
• Luminosità: 80 lumen
• Temperatura del colore: 4000K (White), RGB Color Changing
• Fonte di energia: 6 batterie AA (incluse)
• Durata della batteria: Circa 100 ore
• Dimensioni del prodotto: 9"L x 2.5"A x 1"P
• Peso dell'articolo: 3.68 once
• Materiale: Plastica
• Metodo di controllo: Tap, Infrared Remote
• Caratteristiche speciali: Dimmable, Auto-Off Timer (5, 15, 30, 60 min)
• Utilizzo interno/esterno: Solo al chiuso
• Vita media: 30,000 ore

Figura 7: Dimensioni del prodotto.

8. Garanzia e supporto

This Ecolight LED Battery-Operated Bar Light comes with a Garanzia limitata di 6 anno. For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service. Refer to the product packaging or the official Good Earth Lighting websito per i contatti.