EMANER EMR-8020 Outdoor Motion Sensor Floodlight User Manual

1. Informazioni sulla sicurezza

Please read these instructions carefully before installation and operation. Retain this manual for future reference.

• Sicurezza elettrica: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Ensure proper grounding to avoid electrical shock. If you are unsure about electrical wiring, consult a qualified electrician.
• Luogo di installazione: This fixture is designed for outdoor use. Ensure the mounting surface is sturdy enough to support the fixture's weight.
• Volume di eserciziotage: This floodlight operates on 120V AC. Do not connect to any other voltage.
• Calore: The LED light heads can become hot during operation. Avoid touching them directly.
• Grado di impermeabilità: The fixture has an IP65 waterproof rating, suitable for wet locations. However, ensure all connections are sealed properly during installation.

2. Contenuto della confezione

Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:

• EMANER EMR-8020 Floodlight (2 units for 2-Pack)
• Wiring Caps (x3)
• Screw Nut (x1)
• Spout Plug (x1)
• Screws (various types, as shown in diagram)
• Rondella elastica (x1)
• Bar-Shaped Plate (x1)
• Spongy Cushion (x1)

Immagine: Dimensioni del prodotto e rappresentazione visiva di tutti i componenti inclusi.

3. Installazione

Follow these steps for proper installation of your EMANER EMR-8020 floodlight. Ensure power is OFF at the circuit breaker before starting.

1. Preparare la scatola di giunzione: Use Screw B to fix the cross bar securely to the junction box.


Video: EMANER Dimmable security light installation video. This video provides a visual guide for the installation steps.

2. Attach Gasket: Stick the provided gasket to the aluminum cross bar to ensure a watertight seal.
3. Connessioni dei cavi: Connect the wires according to standard electrical codes:
   • Black wire (Live/L) from fixture to Black wire from power supply.
   • White wire (Neutral/N) from fixture to White wire from power supply.
   • Green wire (Ground) from fixture to the ground wire from power supply.
   Use the provided wiring caps to secure connections.
4. Montare l'apparecchio: Use Screw C to fix the lamp body to the cross bar Screw A through the middle hole. Ensure the fixture is firmly attached to the wall surface.


Image: EMANER floodlight shown mounted on a wall, demonstrating the wall-mounted installation.

5. Seal the Fixture: Apply silicone caulking compound completely around where the back plate meets the wall surface. This prevents water intrusion and maintains the IP65 rating.

4. Funzionamento

The EMANER EMR-8020 floodlight features intelligent motion sensing and dusk-to-dawn functionality.

• Sensore di movimento: The light is equipped with a motion sensor that detects movement up to 26 feet within a 180° detection angle. It will automatically turn on when motion is detected.


Image: The floodlight detecting motion from a person, pet, and car in a driveway at night, illustrating its motion detection capabilities.

• Funzione dal tramonto all'alba: The floodlight will only activate at night when motion is detected. It remains off during daylight hours.
• Durata dell'illuminazione: Once triggered by motion, the light will stay on for approximately 60 seconds.
• Teste luminose regolabili: The three light heads are flexible and can be adjusted to direct illumination precisely where needed, providing wider and larger area lighting.


Image: The floodlight with its three adjustable heads, demonstrating their 90-degree rotation capability for flexible lighting direction.

5. Manutenzione

To ensure optimal performance and longevity of your EMANER floodlight, follow these maintenance guidelines:

• Pulizia: Pulire periodicamente le teste delle luci e la lente del sensore di movimento con un panno morbido e asciutto.amp panno. Non utilizzare detergenti abrasivi o solventi. Assicurarsi che l'alimentazione sia spenta prima di pulire.
• Ispezione: Ispezionare regolarmente l'apparecchio per individuare eventuali segni di danni, cavi allentati o usura. Risolvere tempestivamente eventuali problemi.
• Integrità impermeabile: The ultrasonic welding technology provides IP65 waterproof and dust-proof protection. Ensure the silicone caulk seal around the base remains intact.


Image: The floodlight installed on a wall during rainfall, emphasizing its IP65 waterproof and weather-resistant design.

6. Risoluzione Dei Problemi

If you encounter issues with your EMANER EMR-8020 floodlight, refer to the following common problems and solutions:

• La luce non si accende:
  • Controllare che l'interruttore automatico sia acceso.
  • Verificare che tutti i collegamenti dei cavi siano sicuri.
  • Ensure it is dark enough for the dusk-to-dawn sensor to activate.
  • Test the motion sensor by walking within its detection range.
• La luce rimane accesa ininterrottamente:
  • Check if the motion sensor is obstructed or if there is constant movement within its range.
  • Ensure the light is not installed near a heat source or reflective surface that might trigger the sensor.
  • Verify the wiring connections are correct.
• La luce tremola o si attenua:
  • Verificare la presenza di collegamenti allentati dei cavi.
  • Garantire il volume di eserciziotage è stabile a 120V.
  • Se il problema persiste, contatta l'assistenza clienti.

7. Specifiche

8. Garanzia e supporto

The EMANER EMR-8020 Outdoor Motion Sensor Floodlight comes with a Garanzia a vita, ensuring long-lasting performance and peace of mind.

For technical assistance, warranty claims, or any questions regarding your product, please contact EMANER customer support through the retailer's platform where the product was purchased. You can typically find a 'Contact Seller' or 'Ask a question' option on the product page or in your order history.