Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GeoVision GV-TBL8804 8MP H.265 Super Low Lux WDR Pro Full Color Warm LED IR Bullet IP Camera. The GV-TBL8804 is an outdoor network camera designed for day and night surveillance, featuring an automatic IR-cut filter, one IR LED, and two warm LEDs. It supports H.265 video codec for efficient compression and adheres to IP67 standards for outdoor use. The camera can be powered via Power over Ethernet (PoE) and incorporates AI deep learning algorithms for distinguishing human and vehicle movements, enhancing perimeter protection and real-time alerts when integrated with GeoVision Video Management Software (VMS).
Contenuto della confezione
Prima di procedere con l'installazione, verificare che tutti gli elementi siano presenti nella confezione.
- GeoVision GV-TBL8804 8MP Bullet IP Camera
- Guida all'installazione
- Viti e ancoraggi di montaggio
- Connettore impermeabile (per cavo Ethernet)
- Software CD (or download link for GV-VMS)
Prodotto finitoview
The GeoVision GV-TBL8804 camera features a robust design suitable for outdoor environments. Below is an illustration of the camera's main components.
Figura 1: Davanti e di lato view of the GeoVision GV-TBL8804 8MP Bullet IP Camera. The image displays the main camera lens, two warm LEDs, and a single IR LED on the front panel. The side shows the GeoVision logo and the adjustable mounting bracket.
Caratteristiche principali:
- 1/2.7" progressive scan super low lux CMOS sensor for superior low-light performance.
- Day and Night function with a removable IR-cut filter for optimal image quality in varying light conditions.
- Built-in micro SD card slot (SD / SDHC / SDXC / UHS-I, Class 10) for local storage of recordings.
- AI deep learning capabilities for AI Perimeter Protection and classification of human and vehicle objects.
- IP67-rated weather-resistant enclosure for outdoor installation.
- Two-way audio support for communication.
- Alarm sound and warm LED light triggered by AI detection events for enhanced security.
Impostare
1. Montaggio della fotocamera
- Seleziona una posizione: Choose a suitable outdoor location that provides the desired surveillance coverage and is within range of your network infrastructure. Ensure the mounting surface is sturdy enough to support the camera.
- Fori di perforazione: Use the provided mounting template (if available) to mark and drill pilot holes for the mounting screws.
- Fissare la staffa: Attach the camera's mounting bracket securely to the surface using the supplied screws and anchors.
- Regola l'angolo: Loosen the adjustment screws on the bracket to position the camera at the desired angle. Tighten the screws once the camera is in place.
2. Alimentazione e connessione di rete
- Cavo Ethernet: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the camera's Ethernet port. Use the waterproof connector to ensure a secure and weather-resistant connection.
- Potenza (opzionale): If not using PoE, connect a compatible 12V DC power adapter (not included) to the camera's power input.
- Luci di segnalazione: Observe the camera's indicator lights. A solid green light typically indicates a successful network connection and power.
3. Configurazione iniziale
- Installazione del software: Install the GeoVision GV-VMS software on a Windows-based computer connected to the same network as the camera.
- Rilevamento dispositivo: Use the GV-VMS software or GeoVision's IP Device Utility to discover the camera on your network.
- Credenziali predefinite: Log in to the camera using the default username and password (refer to the separate Quick Start Guide or GeoVision documentation for default credentials).
- Cambiare la password: For security, immediately change the default password to a strong, unique password.
- Impostazioni di rete: Configure network settings such as IP address (static or DHCP), subnet mask, and gateway as required by your network environment.
- Impostazioni di tempo: Impostare la data e l'ora corrette, preferibilmente sincronizzandole con un server NTP.
Istruzioni per l'uso
1. Accesso Live View
- GV-VMS: Open the GeoVision GV-VMS software, add the camera to your device list, and select it to view il feed dal vivo.
- Web Navigatore: Inserisci l'indirizzo IP della telecamera in un web browser (e.g., Chrome, Firefox) to access its web interface. Log in with your credentials to view il feed live e configurare le impostazioni.
- Applicazione mobile: Download and install the GV-Eye mobile application. Add your camera or GV-VMS server to view cibo vivotage da remoto.
2. Configuring Recording
- Archiviazione locale (scheda SD): Insert a Class 10 micro SD card into the camera's slot. Format the SD card via the camera's web interface or GV-VMS. Configure recording schedules and event-triggered recording settings.
- NVR/VMS Recording: If using a Network Video Recorder (NVR) or GV-VMS, configure recording settings directly within the NVR/VMS software.
3. Utilizzo delle funzionalità dell'intelligenza artificiale
- AI Perimeter Protection: Within the camera's web interface or GV-VMS, define detection zones and set rules for AI perimeter protection. This allows the camera to distinguish between human and vehicle intrusions.
- Trigger di eventi: Configure actions to be taken upon AI detection, such as sending alerts, triggering alarm sounds, or activating the warm LED lights.
Manutenzione
1. Pulizia
- Pulire regolarmente l'obiettivo e l'alloggiamento della fotocamera con un panno morbido eamp panno per rimuovere polvere, sporco o macchie d'acqua.
- Do not use harsh chemicals or abrasive materials, as these can damage the lens or housing.
2. Aggiornamenti del firmware
- Periodically check the GeoVision official websito per gli aggiornamenti del firmware.
- Firmware updates can provide new features, performance improvements, and security enhancements.
- Follow the instructions provided with the firmware update package carefully to avoid damaging the device.
3. Backup dei dati
- If using local SD card storage, regularly back up important recordings to an external storage device or network location.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| No image/video feed. | No power, network issue, incorrect IP address. | Check power connection (PoE or adapter). Verify Ethernet cable connection. Ensure camera's IP address is correct and accessible on the network. |
| Qualità dell'immagine scadente. | Dirty lens, improper focus, low light conditions. | Clean the camera lens. Check focus settings (if adjustable). Ensure sufficient lighting or verify Day/Night mode is functioning correctly. |
| Impossibile accedere alla fotocamera tramite web browser. | Incorrect IP address, network firewall, browser compatibility. | Confirm the camera's IP address. Check local firewall settings. Try a different web browser. |
| AI detection not working. | Configurazione errata, fattori ambientali. | Review AI detection zone and rule settings in the camera's interface. Ensure the camera's view è chiaro e non ostruito. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Nome del modello | GV-TBL8804 |
| Risoluzione fissa efficace | 8 MP |
| Massimo WebRisoluzione dell'immagine della camma | 8 MP |
| Risoluzione di acquisizione video | 1080p (Note: 8MP resolution is for still images/higher quality streams, 1080p might refer to a common streaming resolution) |
| Tecnologia del sensore fotografico | CMOS (1/2.7" progressive scan super low lux) |
| Uso interno/esterno | All'aperto |
| Valutazione internazionale di protezione | Grado di protezione IP67 |
| Fonte di alimentazione | Elettrico con cavo (compatibile con PoE) |
| Tecnologia di connettività | Wireless (refers to IP network connectivity, not Wi-Fi) |
| Protocollo di connettività | RTSP |
| Tipo di montaggio | Montaggio a parete |
| Fattore di forma | Proiettile |
| Tecnologia a bassa luminosità | Day/Night, Super Low Lux |
| Tipo di sorgente luminosa | LED (IR and Warm LED) |
| Tipo di messa a fuoco | Messa a fuoco automatica |
| Dimensioni articolo (L x P x A) | 7.4 x 2.8 x 2.8 pollici |
| Peso dell'articolo | 1 libbre |
| Produttore | GeoVision INC |
Garanzia e supporto
GeoVision products are typically covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GeoVision websito per termini e condizioni di garanzia dettagliati.
For technical support, product inquiries, or service requests, please contact GeoVision customer support through their official website or the contact information provided in your product documentation. Ensure you have your product model number (GV-TBL8804) and serial number ready when contacting support.
GeoVision Official Websito: www.geovision.com.tw