ANENG PN200

ANENG PN200 Digital Clamp Manuale di istruzioni del multimetro

Modello: PN200

1. Prodotto finitoview

L'ANENG PN200 è un versatile cl digitaleamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 Digital Clamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Contenuto della confezione

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp metro
  • 2 batterie AAA
  • 1 set di puntali di prova combinati (include 4 prese di collegamento, 2 cavi in ​​PVC, 2 aghi di rame, 2 inserti a U, 2 penne da metro, 2 morsetti a coccodrillo, 2 aghi di perforazione)
  • 1 set di puntali per multimetro
  • 1x Cavo di ricarica
  • 1x Manuale di istruzioni
  • Borsa di stoccaggio 1x

3. Impostazione

3.1 Installazione della batteria

  1. Individuare il coperchio del vano batteria sul retro del dispositivo.
  2. Per aprire il vano, far scorrere il coperchio.
  3. Inserire le due batterie AAA, assicurandosi della corretta polarità (+/-).
  4. Riposizionare il coperchio del vano batteria finché non scatta in posizione.

3.2 Collegamento dei puntali di prova

  1. Per volumetage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Inserire il puntale rosso nel jack 'VΩHz'.
  3. Prima dell'uso, assicurarsi che i collegamenti siano saldi.

4. Istruzioni per l'uso

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Selezione della funzione

Turn the rotary dial to select the desired measurement function:

  • V~: Volume ACtage misurazione
  • V-: Volume DCtage misurazione
  • A~: Misurazione della corrente alternata (utilizzando clamp)
  • UN-: Misurazione della corrente continua (utilizzando clamp)
  • Ω: Misurazione della resistenza
  • Hz: Misurazione della frequenza
  • Capacità: Misurazione capacitiva
  • Diodo/Continuità: Diode test and Continuity check
  • Valore NC: Volume senza contattotage rilevamento

4.2 Funzioni chiave

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • REL: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clamping.
  • IMPOSTATO: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Misure specifiche

Di seguito sono riportate le procedure di misurazione più comuni:

Volume AC/DCtage Misurazione

  1. Turn the dial to 'V~' for AC voltage o 'V-' per DC voltage.
  2. Collegare i puntali di prova ai punti del circuito che si desidera misurare.
  3. Leggi il vol.tage valore sul display.

Misurazione della corrente AC/DC (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Aprire il clamp jaws and enclose a single conductor (not a bundle of wires).
  3. Leggere il valore corrente sul display.
  4. Nota: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clamping.
ANENG PN200 Digital Clamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 Digital Clamp Misuratore che mostra varie funzioni di misurazione

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC voltage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Volume senza contattotage (NCV) Rilevamento

  1. Ruotare la manopola su 'NCV'.
  2. Portare la parte superiore del clamp misuratore vicino a un voltmetro ACtage fonte.
  3. The meter will beep and an indicator light will illuminate if AC voltage viene rilevato.
ANENG PN200 Digital Clamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Dimostrazione video ufficiale del prodotto

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp metro.

5. Manutenzione

5.1 Pulizia

Pulire il dispositivo con un panno asciutto e morbido. Non utilizzare detergenti abrasivi o solventi.

5.2 Sostituzione della batteria

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Conservazione

Conservare il clamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

6. Risoluzione Dei Problemi

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.