PMSUN 8.2KW On/Off Grid Solar Hybrid Inverter User Manual

1. Prodotto finitoview

The PMSUN 8.2KW On/Off Grid Solar Hybrid Inverter is an all-in-one solar energy inverter charger designed for domestic energy storage, RVs, and off-grid systems. It features a pure sine wave output, an integrated 160A MPPT charge controller, and supports dual PV inputs.

2. Istruzioni di sicurezza

Leggere attentamente tutte le istruzioni prima dell'installazione e del funzionamento.
L'installazione deve essere eseguita da personale qualificato in conformità con le normative elettriche locali.
Assicurarsi che l'inverter sia installato in un'area ben ventilata, lontano da materiali infiammabili e dalla luce solare diretta.
Do not install the device near a bedroom, as the fan may produce noise during operation.
Prima di applicare l'alimentazione, verificare che tutti i collegamenti siano saldi e correttamente polarizzati.
Non tentare di riparare o smontare l'inverter. Contattare personale di assistenza qualificato.
Ensure the battery is fully charged before connecting it to the inverter.

3. Caratteristiche principali

Inverter a onda sinusoidale pura: Fornisce alimentazione CA di alta qualità adatta ai dispositivi elettronici sensibili.
Uscita ad alta potenza: 8200W continuous power, 16400W surge power.
Regolatore di carica MPPT integrato: 160A maximum charge current with a PV input range of 90-450Vdc and max VOC of 500V DC.
Doppi ingressi fotovoltaici: Supports two independent PV arrays for optimized solar energy harvesting.
Molteplici modalità di ricarica: Offers Solar Only, Utility Time, Solar Time, and Hybrid Solar charging modes.
Modalità di uscita multiple: Includes Solar Priority, Utility Priority, and SBU Priority for flexible power management.
Funzione BMS: Built-in Battery Management System with lithium battery activation function.
Dual AC Outputs: One for main load (UPS) and another for normal load.
Luci indicatrici RGB: Visual indication of operating modes (Purple for PV, Red for Battery, Blue for Utility).
Compatibilità: Suitable for 48V lead-acid (sealed, AGM, gel, flooded) and lithium batteries.

4. Specifiche tecniche

Caratteristica	Specificazione
Nome del modello	PMSUN 8.2KW On/Off Grid Solar Hybrid Inverter
Massima potenza FV in ingresso	8200 L
Ingresso FV Voltage Gamma	90-450 Vdc
Vol. massimo circuito aperto FVtage (COV)	500 V CC
Vol. Operativo Ottimaletage	300-360 V
Dimensioni consigliate del cavo fotovoltaico	Cavo AWG 10
Corrente di carica massima	160 A
Frequenza di ingresso nominale	Frequenza 50/60 Hz
Potenza di uscita	8200 L
Potenza di picco	16400 L
Volume batteriatage	48 V (Lead-acid, Lithium)
Dimensioni del prodotto	Dimensioni: 53 x 39 x 13 cm
Peso dell'articolo	14.5 kg
Certificazioni	CE

Nota: le specifiche sono soggette a modifiche senza preavviso. Fare sempre riferimento all'etichetta del prodotto per informazioni più accurate.

5. Installazione e collegamenti

Proper installation is crucial for the safe and efficient operation of your hybrid inverter. Follow these guidelines:

5.1 Schema del sistema

System diagram for PMSUN 8.2KW Solar Hybrid Inverter showing connections between solar panels, battery, inverter, utility grid, backup load, and on-grid home load.

This diagram illustrates the typical connections for the 8.2KW solar hybrid inverter, including dual solar panel inputs (Solar Power A, Solar Power B), battery connection, utility grid input, and outputs for both backup and on-grid home loads. A generator can also be connected as an alternative power source.

5.2 Connessioni fisiche

Posteriore view of the PMSUN 8.2KW Solar Hybrid Inverter showing AC input, main output, second output, PV inputs (PV1+, PV1-, PV2+, PV2-), communication port (COMM), and battery terminals (BATTERY +,-).

The image above displays the rear panel of the inverter, highlighting the connection points for AC input, main AC output, secondary AC output, dual PV inputs (PV1 and PV2), a communication port, and battery terminals. Ensure all wiring is correctly sized and terminated.

Ingresso FV: Connect your solar panels to the designated PV+ and PV- terminals. The inverter supports dual MPPT inputs for optimal performance.
Collegamento della batteria: Connect the 48V battery bank to the BATTERY + and - terminals. Ensure correct polarity.
Ingresso CA: Collegare la rete elettrica o il generatore ai terminali AC IN.
Uscita CA: Connect your main loads to the MAIN OUT terminals and secondary loads to the SECOND OUT terminals.
Porta di comunicazione: Use the COMM port for monitoring and data logging.

6. Modalità operative

The inverter offers flexible operating modes to suit various energy management needs:

6.1 modalità di ricarica

Diagram showing four charging modes: Solar Charging, Utility Charge (Solar as backup power), Solar Priority (Utility as backup power), and Solar+Utility Charging.

L'inverter supporta quattro distinte modalità di ricarica: Ricarica solare (solar is the primary source), Spese di utenza (utility is the primary source, solar is backup), Priorità solare (solar is primary, utility is backup), and Solar+Utility Charging (both solar and utility charge the battery simultaneously).

6.2 modalità di uscita

The inverter provides three output modes for power distribution:

Priorità solare: Solar power is prioritized for loads, then battery power, and finally utility power.
Priorità di utilità: Utility power is prioritized for loads, then solar power, and finally battery power.
Priorità SBU: La priorità è data all'energia solare, poi all'energia delle batterie e infine all'energia elettrica.

7. Display e indicatori

Diagram showing the inverter's RGB lighting system, indicating different working modes: Purple for PV Mode, Red for Battery Mode, and Blue for Utility Mode. The lights automatically switch based on the inverter's operation (off-grid, hybrid, on-grid).

The inverter features RGB indicator lights that automatically change color to reflect the current operating mode: Purple for PV Mode, Red for Battery Mode, and Blue for Utility Mode. This provides a quick visual status of the system.

Inverter display showing various parameters like input, output, charge value, battery information, and warning codes. The display also highlights key features like 160A MPPT, 8200W PV, 360VDC/500VDC, Pure Sine Wave, 50/60Hz Auto, and Lithium Battery Support.

The LCD display provides detailed information on the inverter's status, including input/output values, charging status, battery information, and any warning or fault codes. Users can navigate through menus using the touch buttons to view specific data and adjust settings.

8. Lithium Battery Activation (BMS)

The inverter includes a built-in Battery Management System (BMS) with a lithium battery activation function. This feature allows the inverter to activate a dormant lithium battery through PV or mains power, even if the battery has entered a protection mode. This eliminates the need for manual activation.

9. Monitoring (WiFi App)

The inverter supports WiFi monitoring through a dedicated mobile application (Sun House App). This allows users to remotely monitor system performance, view data, and manage settings from their smartphone or tablet.

This video demonstrates the process of connecting the inverter to the Sun House App for WiFi monitoring, including network configuration and device registration. It shows how to search for WLAN, enter Wi-Fi credentials, and add the device to your account for remote access to energy data.

10. Manutenzione

Ispezione regolare: Periodically check all cables and connections for wear, damage, or loose contacts.
Pulizia: Keep the inverter's ventilation openings clear of dust and debris to ensure proper cooling. Use a soft, dry cloth for cleaning.
Ambiente: Assicurarsi che l'ambiente di installazione rimanga entro gli intervalli di temperatura e umidità di esercizio specificati.
Aggiornamenti del firmware: Check for available firmware updates from the manufacturer to ensure optimal performance and security.

11. Risoluzione Dei Problemi

Se riscontri problemi con l'inverter, fai riferimento ai seguenti passaggi comuni per la risoluzione dei problemi:

Nessuna potenza in uscita: Check AC input and output connections, battery voltage, and PV input voltage. Ensure all circuit breakers are on.
L'inverter non carica la batteria: Verificare i collegamenti del pannello fotovoltaico e il volumetage. Check battery health and connections. Ensure the charging mode is correctly configured.
Codici di errore sul display: Consult the inverter's display for specific error codes. Refer to the full manual (if provided separately) for a detailed explanation of each code and recommended actions.
Avviso di sovraccarico: Reduce the connected load. The inverter's surge power capacity is limited.
Surriscaldamento: Assicurare un'adeguata ventilazione attorno all'inverter. Rimuovere eventuali ostruzioni dalle prese d'aria di raffreddamento.

For persistent issues, contact PMSUN customer support or a qualified technician.

12. Garanzia e supporto

This PMSUN 8.2KW On/Off Grid Solar Hybrid Inverter comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.

For technical support, service, or warranty claims, please contact PMSUN customer service through the contact information provided in your product packaging or on the official PMSUN websito.

PMSUN 8.2KKW