KEMIMOTO Motorcycle License Plate Bracket with LED Signal Light for Sportster S RH1250 User Manual

Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your KEMIMOTO Motorcycle License Plate Bracket with integrated LED Signal Light. This fender eliminator kit is designed for specific Sportster S RH1250 models (2021-2025) to replace the factory license plate holder and enhance the motorcycle's rear aesthetics and visibility. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Informazioni sulla sicurezza

• Always ensure the motorcycle is stable and turned off before beginning any installation or maintenance.
• Disconnect the battery before performing any electrical work to prevent short circuits or electrical shock.
• Durante l'installazione, indossare adeguati dispositivi di protezione individuale, come guanti e protezioni per gli occhi.
• Ensure all connections are secure and wires are routed away from moving parts or hot surfaces.
• In caso di dubbi su un passaggio, consultare un tecnico motociclistico qualificato.
• Verify all lights function correctly after installation before riding.

Contenuto della confezione

Verifica che tutti i componenti elencati di seguito siano presenti nel tuo pacchetto:

Image: All parts included in the KEMIMOTO Fender Eliminator Kit.

1. Fanale posteriore x1
2. Rack Holder x1
3. License Plate Bracket x1
4. Piastra di estensione x1
5. M5 Square Head Bolt x2
6. Bullone x2
7. M5*L12 Cross Head Bolt x2
8. Dado flangiato M5 x4
9. Fascetta x5
10. L Wrench x1

Configurazione e installazione

This section outlines the steps to install the KEMIMOTO License Plate Bracket. Professional installation is recommended if you are not familiar with motorcycle electrical systems or component removal.

Sopraview of Installed Product

Image: The KEMIMOTO Fender Eliminator Kit mounted on a motorcycle, showing integrated LED turn signals and brake light.

Image: Visual comparison of the motorcycle's rear fender before and after installation, demonstrating a cleaner appearance.

Fasi di installazione

1. Preparare la motocicletta: Park the motorcycle on a stable surface. Turn off the engine and remove the key. Disconnect the negative terminal of the battery to prevent accidental electrical issues.
2. Rimuovere i componenti originali: Carefully remove the existing license plate holder and any associated wiring. Refer to your motorcycle's service manual for specific instructions on removing the rear fender and tail light assembly.
3. Montare la staffa: Attach the tail light to the rack holder, then secure the license plate bracket and extension plate using the provided M5 bolts and nuts. Ensure all connections are snug but do not overtighten.
4. Mount the New Assembly: Position the assembled KEMIMOTO bracket onto the motorcycle's rear fender area. Secure it using the appropriate bolts.
5. Wire the LED Lights: Connect the wiring of the new LED tail light and turn signals to the motorcycle's existing wiring harness. Match the wires according to their functions (e.g., brake, turn signal, ground). Use the provided zip ties to secure any loose wiring.
6. Funzionalità di prova: Reconnect the motorcycle battery. Turn on the ignition and test the brake light, left turn signal, and right turn signal to ensure they are all functioning correctly.
7. Controllo finale: Ensure all bolts are tightened, and the bracket is securely mounted. Check for any obstructions or loose components.

Videoguida all'installazione

Istruzioni per l'uso

The KEMIMOTO License Plate Bracket features integrated LED lights that serve multiple functions for enhanced visibility and safety.

• Luce di marcia: When the motorcycle's ignition is on, the LED lights will illuminate as a running light, providing continuous rear visibility.
• Luce freno: When the brake lever or pedal is engaged, the LED lights will illuminate brighter to indicate braking.
• Indicatori di direzione: Activating the left or right turn signal switch will cause the corresponding section of the LED light to flash, indicating your intended turn direction.

Manutenzione

Regular maintenance ensures the longevity and proper function of your license plate bracket and LED lights.

• Pulizia: Clean the bracket and LED lens regularly with a soft cloth and mild soap solution. Avoid abrasive cleaners that could scratch the surface or damage the LED housing.
• Ispezioni: Controllare periodicamente il serraggio di tutti i bulloni di montaggio. Le vibrazioni dovute alla guida possono causare l'allentamento dei dispositivi di fissaggio nel tempo.
• Cablaggio: Inspect wiring for any signs of wear, fraying, or damage. Ensure all electrical connections remain secure and free from corrosion.
• Funzionalità LED: Regularly test the running light, brake light, and turn signals to confirm they are all working correctly.

Risoluzione dei problemi

If you encounter issues with your KEMIMOTO License Plate Bracket, refer to the following troubleshooting guide:

Specifiche

Image: Key dimensions of the KEMIMOTO license plate bracket.

Garanzia e supporto

KEMIMOTO products are manufactured to high-quality standards. For warranty information, technical support, or assistance with parts, please refer to the contact information provided with your purchase or visit the official KEMIMOTO websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.