Ultralux U100596
Manuale utente della moderna lampada da parete a LED Ultralux da 12 pollici
Modello: U100596
Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Ultralux 12 Inch Modern LED Matte Black Up and Down Wall Light. Please read this manual thoroughly before installation and retain it for future reference. This outdoor sconce is designed to provide efficient and aesthetically pleasing illumination for your patio, front door, or other exterior areas.

Immagine: Frontale view of the Ultralux 12 Inch Modern LED Matte Black Up and Down Wall Light, showcasing its sleek cylindrical design and matte black finish.
Informazioni sulla sicurezza
AVVERTIMENTO: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing.
- In caso di dubbi sulla procedura di installazione, consultare sempre un elettricista qualificato.
- Non modificare in alcun modo l'apparecchio. Qualsiasi modifica potrebbe invalidare la garanzia e rappresentare un rischio per la sicurezza.
- This fixture is designed for outdoor use and is wet location approved.
- Assicurarsi che tutti i collegamenti elettrici siano sicuri e conformi alle normative elettriche locali.
- Do not connect this fixture to a dimmer switch, as it is not dimmable.
Contenuto della confezione
Verificare che tutti i componenti siano presenti prima di iniziare l'installazione:
- Ultralux 12 Inch Modern LED Wall Light Fixture (1)
- Staffa di montaggio (1)
- Viti di montaggio (2)
- Dadi in filo (3)

Image: Components included for installation, showing the light fixture's backplate, mounting screws, and wire nuts.
Configurazione e installazione
This fixture is designed for self-installation. Follow these steps carefully:
- Spegnimento dell'alimentazione: Locate the circuit breaker controlling the power to the desired installation location and turn it off. Verify power is off using a voltagetester.
- Preparare la superficie di montaggio: Ensure the electrical box is securely mounted and clean.
- Fissare la staffa di montaggio: Secure the provided mounting bracket to the electrical box using the mounting screws. Ensure the bracket is level.
- Effettuare i collegamenti elettrici:
- Connect the black wire from the fixture to the black (hot) wire from the electrical box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the electrical box using a wire nut.
- Connect the green or bare copper ground wire from the fixture to the ground wire from the electrical box (or to the electrical box itself if applicable) using a wire nut.
- Inserire con cura tutti i fili nella scatola elettrica.
- Montare l'apparecchio: Align the fixture with the mounting bracket and secure it using the provided screws or nuts, ensuring a snug fit against the wall.
- Ripristina alimentazione: Riattivare l'alimentazione elettrica tramite l'interruttore automatico. Testare l'apparecchio di illuminazione.
Istruzioni per l'uso
The Ultralux LED Wall Light operates via a standard wall switch. Once installed and power is restored, simply toggle the switch to turn the light on or off.
- This fixture provides 2000 lumens of warm white light (3000K color temperature).
- The design directs light both upwards and downwards, creating an aesthetic lighting effect on your wall.

Image: Two Ultralux wall lights installed on an outdoor wall, demonstrating the up and down lighting effect that enhances the outdoor space.
Manutenzione
The Ultralux LED Wall Light requires minimal maintenance.
- Pulizia: Per pulire l'apparecchio, assicurarsi che l'alimentazione sia spenta. Utilizzare un panno morbido eamp cloth to wipe down the matte black finish and glass shade. Do not use abrasive cleaners or solvents, as these can damage the finish.
- LED: The LEDs in this fixture are integrated and non-removable. There are no bulbs to replace. The fixture has an expected lifetime of over 50,000 hours.
- Ispezione: Ispezionare periodicamente l'apparecchio per verificare la presenza di eventuali segni di danni o collegamenti allentati.

Immagine: Primo piano view of the integrated LED array within the fixture, highlighting that no bulbs need replacement.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La luce non si accende. | Nessuna alimentazione al dispositivo. Collegamento del filo allentato. Interruttore difettoso. | Controllare l'interruttore. Assicurarsi che tutti i collegamenti dei cavi siano ben saldi (spegnere prima l'alimentazione). Testare l'interruttore o sostituirlo se necessario. |
| Sfarfallio di luce. | Collegamento del filo allentato. Interruttore dimmer non compatibile (l'apparecchio non è dimmerabile). | Controllare tutti i collegamenti dei cavi (prima spegnere l'alimentazione). Ensure the fixture is connected to a standard ON/OFF switch, not a dimmer. |
| L'emissione luminosa è debole o incostante. | Problema di alimentazione. Guasto del LED integrato. | Verify stable power supply. If problem persists, contact customer support for warranty assistance. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | Minore 100596 |
| Dimensioni (L x P x A) | 5.63" x 4.5" x 12" |
| Peso | 3.78 libbre |
| Temperatura del colore | 3000K (bianco caldo) |
| Luminosità | 2000 lumen |
| Cosatage | 30 Watt |
| Voltage | 120 V CA |
| Tipo di sorgente luminosa | LED integrato |
| Dimmerabile | NO |
| Materiale | Nickel (Fixture Body), Glass (Shade) |
| Tipo di finitura | Nero opaco |
| Uso interno/esterno | Esterno (approvato per luoghi umidi) |
| Tutta la vita | > 50,000 hours (L70) |

Image: Graphic detailing key technical specifications including color temperature, lumens, dimmability, wet location suitability, warranty, and lifetime.

Image: Diagram illustrating the precise dimensions of the Ultralux 12 Inch Wall Light, including height, width, and depth from the wall.
Garanzia e supporto
Garanzia del produttore: This Ultralux product is covered by a 5-Year Limited Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
Cosa è coperto: Repair or replacement of defective parts or the entire fixture at the manufacturer's discretion.
Cosa non è coperto: Damage caused by improper installation, misuse, abuse, accidents, unauthorized repairs or modifications, or acts of nature. Normal wear and tear is also not covered.
Per ottenere il servizio di garanzia: Please contact Ultralux customer support with your proof of purchase and a description of the issue. Do not attempt to repair the fixture yourself.
For further assistance or inquiries, please visit the official Ultralux store or contact their customer service department.
Ultralux Store: https://www.amazon.com/stores/UltraLux/page/62E57D1D-C0CC-4A28-810F-65F315597BF0
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.