NYXI Joypad Wireless Controller for Nintendo Switch/Lite/OLED

1. Introduzione

Thank you for choosing the NYXI Joypad Wireless Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller for an optimal gaming experience on Nintendo Switch, Switch Lite, and Switch OLED consoles.

2. Contenuto della confezione

Si prega di controllare il contenuto della confezione dopo averla disimballata:

• NYXI Joypad Wireless Controller (Left & Right)
• Cavo di ricarica USB-C
• Manuale d'uso

3. Disposizione del controller

Familiarize yourself with the buttons and features of your NYXI Joypad Controller:

• Joypad sinistro: Left Analog Stick, D-Pad, L/ZL Buttons, Capture Button, Minus (-) Button, Programmable Button (M1)
• Joypad destro: Right Analog Stick, A/B/X/Y Buttons, R/ZR Buttons, Home Button, Plus (+) Button, Programmable Button (M2)
• Both Joypads: RGB LED Indicators, USB-C Charging Port, Sync Button

Note: Specific button functions may vary depending on the game.

4. Impostazione

4.1 Carica iniziale

Before first use, fully charge the controllers. Connect the USB-C charging cable to the charging port on each joypad and then to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The RGB LED indicators will show charging status and turn off when fully charged.

4.2 Abbinamento con Nintendo Switch

There are two methods to pair your NYXI Joypad controllers with your Nintendo Switch console:

1. Method 1: Direct Attachment

   Slide the left and right Joypads onto the side rails of your Nintendo Switch console until you hear a click. The console will automatically detect and pair the controllers. Once paired, you can detach them for wireless play.
2. Metodo 2: associazione wireless
   • Dal menu HOME di Nintendo Switch, seleziona "Controller" > "Cambia impugnatura/ordine".
   • On each NYXI Joypad, press and hold the small Pulsante di sincronizzazione (usually located on the side or bottom) for a few seconds until the RGB LED indicators start flashing rapidly.
   • The console will detect the controllers. Once paired, the LED indicators will light up steadily.

Ensure your Nintendo Switch console is updated to the latest system software version for optimal compatibility.

5. Istruzioni per l'uso

5.1 Funzione di riattivazione

When the console is in sleep mode, press the Pulsante Home on the right Joypad to wake up the Nintendo Switch console wirelessly.

5.2 Funzione Turbo

La funzione Turbo consente di premere un pulsante in modo rapido e continuo. Per attivarla:

1. Press and hold the desired action button (e.g., A, B, X, Y, L, R, ZL, ZR).
2. Tenendo premuto il pulsante di azione, premere il Pulsante Turbo (refer to controller diagram if available, or typically a dedicated button).
3. Release both buttons. The action button will now continuously input until Turbo is deactivated.

To deactivate Turbo, repeat the process: hold the action button and press the Turbo Button again.

5.3 RGB LED Adjustment

The NYXI Joypads feature adjustable RGB LED lighting. Specific controls for changing colors or modes are usually found by pressing a dedicated LED button or a combination of buttons (e.g., L3 + R3 + A). Refer to the quick start guide or product packaging for exact button combinations.

5.4 Vibrazione regolabile

The vibration intensity can be adjusted to your preference. This is typically done through a button combination (e.g., Turbo + D-Pad Up/Down) or via the Nintendo Switch system settings under "Controllers and Sensors".

5.5 Pulsanti programmabili (M1/M2)

The M1 (left Joypad) and M2 (right Joypad) buttons can be programmed to mimic other button inputs or sequences. Follow these general steps to program them:

1. Premere e tenere premuto il tasto Pulsante del programma (often a small button on the back or side, or a combination like SET + M1/M2) until an indicator light flashes.
2. Press the button or sequence of buttons you wish to assign to M1/M2.
3. Press the M1 or M2 button to confirm the assignment. The indicator light will stop flashing.

To clear a programmed button, repeat the programming process without inputting any new buttons, or refer to specific instructions for a reset function.

6. Manutenzione

6.1 Pulizia

To clean your controllers, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or solvents. Ensure no liquid enters the controller's openings.

6.2 Conservazione

Store the controllers in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, ensure they are fully charged to preserve battery life.

7. Risoluzione Dei Problemi

7.1 Controller Not Pairing

• Ensure the controllers are sufficiently charged.
• Verifica che la console Nintendo Switch sia aggiornata all'ultima versione del software di sistema.
• Try re-pairing using both direct attachment and wireless pairing methods.
• Riavvia la tua console Nintendo Switch.
• Reset the controllers by pressing the small reset button (if available, often a pinhole) or holding the Sync button for an extended period.

7.2 Input Lag o disconnessioni

• Ensure there are no obstructions between the controllers and the console.
• Move closer to the console.
• Controllare la presenza di altri dispositivi wireless che potrebbero causare interferenze.
• Ensure controllers are fully charged.

7.3 I pulsanti non rispondono

• Controllare se il pulsante è bloccato o ostruito.
• Test the button in the Nintendo Switch "Test Input Devices" settings.
• Eseguire un reset del controller.

8. Specifiche

9. Garanzia e supporto

NYXI products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NYXI websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

Si prega di notare che i termini della garanzia possono variare in base alla regione e al rivenditore.