Introduzione
Thank you for choosing the CaDA C51043W Technics Buggy Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your remote control car. Please read this manual thoroughly before use to ensure proper function and safety.
Prodotto finitoview
The CaDA C51043W is a 522-piece building block set designed to construct an all-terrain remote control buggy. It features a 2.4 GHz 4-channel remote control system, a suspension system, and a high-horsepower motor for dynamic performance. The assembled model is compatible with Lego Technic components.
Figure 1: Assembled CaDA C51043W Technics Buggy with its remote control.
Contenuto della confezione
Verifica che tutti i componenti elencati di seguito siano presenti nel tuo pacchetto:
- 1 x Spare parts pack (522 building blocks)
- 1 x Telecomando
- 1 x Manuale utente (questo documento)
- 1 x Battery pack (JV1010/7.4V Lithium battery)
- 1 cavo di ricarica USB
- 1 x Servo motor
- 1 x L motor
Figura 2: Oltreview of the main components included in the package, such as the remote control, motors, battery box, and USB cable.
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Numero di modello | C51043W |
| Numero di pezzi | 522 |
| Materiale | Plastic + Hard parts |
| Frequenza del telecomando | 2.4 GHz |
| Distanza di controllo remoto | Circa 25 metri |
| Velocità massima | 4.1 chilometri all'ora |
| Tempo di utilizzo | 30 minuti |
| Tempo di ricarica | 4-6 ore (prima carica: 8 ore) |
| Batteria per auto | JV1010/7.4V Lithium battery |
| Batteria del telecomando | 2 x AAA JV8011/1.5V batteries (not included) |
| Peso del prodotto | 1280 grammi |
| Dimensioni assemblate (L x P x A) | Circa 34.7 x 20.8 x 13.5 cm (13.75 x 8.2 x 5.3 pollici) |
Figure 3: Key dimensions of the assembled buggy.
Impostare
1. Assemblaggio
Follow the included intuitive instruction manual for step-by-step assembly. The pieces are packed in numbered bags to simplify the building process. Ensure all connections are secure.
Figura 4: Lato anteriore view of the fully assembled buggy.
2. Installazione e ricarica della batteria
- Batteria dell'auto: Install the JV1010/7.4V Lithium battery pack into the designated compartment in the buggy. Connect it securely.
- Ricarica: Use the provided USB charging cable to charge the car's battery. The first charge should be approximately 8 hours. Subsequent charges will take 4-6 hours. Do not overcharge.
- Batteria del telecomando: Insert 2 x AAA JV8011/1.5V batteries (not included) into the remote control. Ensure correct polarity.
Istruzioni per l'uso
1. Accensione/spegnimento
- Accendere l'interruttore di alimentazione del buggy.
- Accendere l'interruttore di alimentazione del telecomando.
- The remote control and buggy should automatically pair. If not, refer to the troubleshooting section.
2. Controlli di base
The 4-channel remote control allows for precise movement:
- Avanti indietro: Use the left joystick to move the buggy forward or backward.
- Svolta a sinistra/destra: Use the right joystick to steer the buggy left or right.
- Luci: The remote control may have a button to control the buggy's lights.
Figure 5: The buggy with its headlights on, ready for operation.
3. Consigli di guida
- Operate on flat, clear surfaces for optimal performance.
- Avoid water, sand, or excessively dusty environments to prevent damage to electronic components.
- Practice gentle steering and acceleration to master control.
Manutenzione
1. Pulizia
Wipe the buggy with a soft, dry cloth after each use to remove dust and debris. Do not use water or chemical cleaners.
2. Conservazione
Store the buggy and remote control in a cool, dry place away from direct sunlight. Remove batteries from the remote control if storing for extended periods.
3. Cura della batteria
- Caricare sempre completamente la batteria dell'auto prima dell'uso.
- Non lasciare le batterie in carica incustodite.
- If the battery is damaged or leaking, discontinue use immediately and dispose of it properly.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il buggy non risponde al telecomando. | Low battery in buggy or remote control; Not paired; Out of range. | Charge buggy battery; Replace remote control batteries; Ensure buggy and remote are powered on and within 25m range. |
| Il buggy si muove lentamente o in modo incoerente. | Low buggy battery; Obstruction in wheels/gears. | Charge buggy battery; Check for and remove any obstructions. |
| Le luci non funzionano. | Loose connection; Damaged LED. | Check wiring connections for the lights; Contact support if damaged. |
Garanzia e supporto
Each piece of this product undergoes quality inspection before shipment. If any part is missing or defective upon arrival, please circle the missing part in the instruction manual and send a picture to our customer support for a free replacement. Please retain your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided on the product packaging or the official CaDA websito.